Man: ['J.W. Winco, Inc.'] (Page 2)

GN 440 leveling feet are simple, economically priced components. The static load rating of these feet is limited due to the acceptable load rating of the stud (tensile strength 500/mm2). The values given in the table assume a straight compressive load, perpendicular to the foot. The bending and buckling stress factors often found in the actual application reduce the load rating of the stud, and must be compensated for accordingly.

GN 440.5 leveling feet are simple, economically priced components. The static load rating of these feet is limited due to the acceptable load rating of the stud (tensile strength 500/mm2).The values given in the table assume a straight compressive load, perpendicular to the foot. The bending and buckling stress factors often found in the actual application reduce the load rating of the stud, and must be compensated for accordingly. To insure proper leveling mount size, divide the machine weight by the number of feet required. This will equal the pounds or load per leveling foot.

GN343.2-32-M10-80-KSE Leveling Mount

GN343.2-40-M12-80-KR Leveling Mount

GN343.2-50-M10-63-KR Leveling Mount

GN343.2-60-M16-80-KSE Leveling Mount

J.W. Winco

J.W. Winco GN812 Vertical Acting Toggle Clamp, 812-200-EV, Size 200, Sheet Metal Toughened Steel

J.W. Winco GN820 U-Bar Horizontal Toggle Clamp, 820-130-M, Size 130, Sheet Metal

J.W. Winco GN844 Heavy Duty Push-Pull Toggle Clamp, 844-160-ASD, Size 160, Steel

J.W. Winco GN851 Latch-Type Toggle Clamp, 851-700-T2, Size 700, Steel

J.W. Winco SNSM-1-1/4X20-2.50-NI "Snap-Lock" Non-Skid Leveling Mounts SS, Threaded Stud

J.W. Winco, GN708.1 Clamping Toggle Screw Assembly, 708.1-M5-45-A-ST, Flat Tip, Steel

J.W. Winco, GN831-NI Toggle Latch W/O Safety Catch, 101ENH5/A, Size 100, Stainless Steel

J.W. Winco, GN852 Latch-Type Toggle Clamp, 852-4000-T2, W/ Pull Latch, Forged Steel

J.W. Winco, Inc 16N100M84 J.W. Winco GN343.2 Steel Leveling Feet, Threaded Stud, 2.36" Base Dia, M16 x 2.0 Thread, 3.94"L Stud

J.W. Winco, JW708 Flat Cushion Spindle,, 1/4-20 X 1-3/4, Neoprene

J.W. Winco, JW708 Flat Cushion Spindle,, 3/8-16 X 3-1/2, Neoprene

J.W. Winco, Vibration / Shock Absorption Mounts Cylindrical Type, 1.97", 551.4344 Max Load

J.W. Winco, Vibration / Shock Absorption Mounts, Conical Type, 1.77", 168 Max Load

J.W. Winco, Vibration Isolation Mounts Cylindrical Type, 1.00", 217 Max Load

J.W. Winco, Vibration Isolation Mounts Cylindrical Type, 2.76", 899.2 Max Load

JW WINCO 12T425LIT LPST-4.00-1X8-4.25-C1 LEVELING MOUNT

JW WINCO 451.2-25-25-1/4-55 GN451.2-25-25-1/4X20-55 RUBBER BUMPER STAINLESS, TAPPED AND THREADED STUD

JW WINCO 451.2-51-41-3/8-55 GN451.2-51-41-3/8X16-55 RUBBER BUMPER STAINLESS, TAPPED AND THREADED STUD

JW WINCO 452.2-25-25-5/16-55 GN452.2-25-25-5/16X18-55 RUBBER BUMPER STAINLESS, TAPPED

JW WINCO GN708.1-M10-77-A-ST SPINDLE ASSEMBLY

JW WINCO GN708.1-M6-35-B-NI SPINDLE ASSEMBLY

JW WINCO GN708.1-M6-35-B-ST SPINDLE ASSEMBLY

JW WINCO GN708.1-M6-55-B-NI SPINDLE ASSEMBLY

JW WINCO GN708.1-M8-43-A-ST SPINDLE ASSEMBLY

JW WINCO GN708.1-M8-68-A-ST SPINDLE ASSEMBLY

JW WINCO GN708.1-M8-68-B-NI SPINDLE ASSEMBLY

JW WINCO GN708.1-M8-68-B-ST SPINDLE ASSEMBLY

JW Winco Series GN 810 Steel Vertical Acting Toggle Clamp with Horizontal Mounting Base, Metric Size, Solid Bar, Clam...

JW Winco Series GN 810.1 Steel Vertical Acting Toggle Clamp with Vertical Mounting Base, Metric Size, Solid Bar, Clam...

JW Winco Series GN 810.1 Steel Vertical Acting Toggle Clamp with Vertical Mounting Base, Metric Size, U Bar, Clamp Si...

JW Winco Series GN 820.1 Steel Horizontal Acting Toggle Clamp with Vertical Mounting Base, Metric Size, Clamp Size 35...

JW Winco Series GN 820.1 Steel Horizontal Acting Toggle Clamp with Vertical Mounting Base, Metric Size, Clamp Size 45...

JW Winco Series GN 840 Steel Push-Pull Type Toggle Clamp, Metric Size, Clamp Size 50, 800 Newton Holding Capacity, Ty...

JW Winco Series GN 843.1 Steel Push-Pull Type Toggle Clamp, Metric Size, Clamp Size 165, 5400 Newton Holding Capacity...

JW Winco Series GN 843.1 Steel Push-Pull Type Toggle Clamp, Metric Size, Clamp Size 340, 7000 Newton Holding Capacity...

JW Winco Series GN 860 Steel Pneumatic Toggle Clamp with Horizontal Mounting Base and Clasp, Type EP3, Metric Size, Solid Bar, Clamp Size 200, 2200 Newton Holding Capacity

JW Winco Series GN 861 Steel Heavy-Duty Pneumatic Toggle Clamp with Horizontal Mounting Base, Metric Size, Clamp Size...

JW Winco Series GN 862 Steel Pneumatic Toggle Clamp with Vertical Mounting Base and Clasp, Type EPV3, Metric Size, Solid Bar, Clamp Size 300, 2700 Newton Holding Capacity

JW Winco Series GN 910 Steel Heavy Duty Vertical Acting Toggle Clamp with Horizontal Mounting Base and Slotted Hole, ...

JWWINCO 30N102LVP MLPST-6.00-M30-4.00-D1 Leveling Mount, Stainless Steel, Thread:M30 Stud:101.6mm - MROSupply.com

JWWINCO GN351-30-30-M8-SS-55 Rubber Bumper Threaded Studs - M8

JWWINCO GN351-75-40-M12-ES-55 Rubber Bumper Internal Thread And Threaded Stud - M12 - MROSupply.com

JWWINCO GN351-8-8-M3-SS-55 Rubber Bumper Threaded Studs - M3 - MROSupply.com

JWWINCO GN352-10-10-M4-E-55 Rubber Bumper Tapped - M4 - MROSupply.com

JWWINCO GN352-25-15-M6-S-55 Rubber Bumper Threaded Stud - M6 - MROSupply.com

JWWINCO GN352-50-40-M10-S-55 Rubber Bumper Threaded Stud - M10 - MROSupply.com

JWWINCO GN352-60-20-M10-S-55 Rubber Bumper Threaded Stud - M10 - MROSupply.com

JWWINCO GN352-8-8-M3-S-55 Rubber Bumper Threaded Stud - M3 - MROSupply.com

JWWINCO GN451.1-19-19-1/4X20-55 Rubber Bumper Stainless, Threaded Studs - 1/4x20 - MROSupply.com

JWWINCO GN451.1-38-25-3/8X16-55 Rubber Bumper Stainless, Threaded Studs - 3/8x16 - MROSupply.com

JWWINCO GN451.2-16-13-8X32-55 Rubber Bumper Stainless, Tapped And Threaded Stud - 8x32 - MROSupply.com

JWWINCO GN452-30-20-M8-S-55 Rubber Bumper Stainless, Threaded Stud - M8 - MROSupply.com

JWWINCO GN452.1-25-19-1/4X20-55 Rubber Bumper Stainless, Threaded Stud - 1/4x20 - MROSupply.com

JWWINCO GN452.2-51-41-3/8X16-55 Rubber Bumper Stainless, Tapped - 3/8x16 - MROSupply.com

JWWINCO GN453.2-45-51-3/8X16-55 Rubber Bumper Cone, Stainless, Tapped - 3/8x16 - MROSupply.com

JWWINCO GN453.2-51-57-3/8X16-55 Rubber Bumper Cone, Stainless, Tapped - 3/8x16 - MROSupply.com

LEVELLING MOUNT, PLAIN BASE, HEX, M20 X 2.5 IN THREAD, 11.97 IN X 168 MMX 3.15 IN, ZINC, ST

The solid rubber pad is firmly embedded in the sheet metal base and secured by a screw loctited into place. The threaded stud can be either adjusted via the internal hexagon at the top or the wrench flats at the lower end. To insure proper leveling mount size, divide the machine weight by the number of mounts required. This will equal the pounds or load per mount. The static load is limited by any deformation of the base. Black pad inlay (NBR) offers high resistance to swelling when in contact with oils and fuels.

Toggle Clamps

Vibration Mount, 2 Tapped Holes, 1.50" Dia, 1.00"H, 5/16-18 Thread

Vibration Mount, 2 Threaded Studs, .79" Dia, 15mm H, M6 x 1.0 Thread 351-20-15-M6-SS-55 GLO-B831512 - SIM Supply

Vibration Mount, 2 Threaded Studs, .98" Dia, 15mm H, M6 x 1.0 Thread

Vibration Mount, 2 Threaded Studs, 1.18" Dia, 15mm H, M8 x 1.25 Thread

Vibration Mount, 2 Threaded Studs, 1.50" Dia, .75"H, 5-16-18 Thread 351.1-38-19-5/16-55 GLO-B831485 - SIM Supply

Vibration Mount, Tapped Hole | 351-10-10-M4-ES-55

Vibration Mount, Tapped Hole | 351-15-15-M4-EE-55

Vibration Mount, Tapped Hole | 351-30-15-M8-ES-55

Vibration Mount, Tapped Hole | 351-30-30-M8-ES-55

Vibration Mount, Tapped Hole | 351-30-40-M8-EE-55

Vibration Mount, Tapped Hole | 351-50-30-M10-EE-55

Vibration Mount, Tapped Hole | 351-60-30-M10-EE-55

Vibration Mount, Tapped Hole | 351-60-30-M10-ES-55

Vibration Mount, Tapped Hole | 351-75-55-M12-ES-55