Man: ['Micro 100 Tool Corporation']

Products with this attribute (1119 total)

0.5000" (1/2) Cutter DIA x 1.000" (1) Length of Cut x 120? included Carbide Drill/End Mill, 2 Flutes, AlTiN Coated

0.5000" (1/2) Min Bore DIA x 1.000" (1) Max Bore Depth x 0.1250" (1/8) Tooth Width x 0.1500" Projection x 0.5000" (1/2) Shank DIA x 3.00" (3) Overall Length - Carbide Retaining Ring Grooving Left Hand, AlTiN Coated

0.5000" (1/2) Min Bore DIA x 1.000" (1) Max Bore Depth x 0.1870" (3/16) Tooth Width x 0.1500" Projection x 0.5000" (1/2) Shank DIA x 3.00" (3) Overall Length x 0.0935" Radius - Carbide Full Radius Grooving Right Hand, AlTiN Coated

0.5000" (1/2) Min Bore DIA x 1.000" (1) Max Bore Depth x 0.2500" (1/4) Tooth Width x 0.1500" Projection x 0.5000" (1/2) Shank DIA x 3.00" (3) Overall Length - Carbide Retaining Ring Grooving Right Hand, AlTiN Coated

0.5000" (1/2) Min Bore DIA x 1.250" (1-1/4) Max Bore Depth x 0.0930" (3/32) Tooth Width x 0.1500" Projection x 0.5000" (1/2) Shank DIA x 3.00" (3) Overall Length x 0.0465" Radius - Carbide Full Radius Grooving Right Hand, AlTiN Coated

0.5000" (1/2) Min Bore DIA x 1.250" (1-1/4) Max Bore Depth x 0.1870" (3/16) Tooth Width x 0.1500" Projection x 0.5000" (1/2) Shank DIA x 3.00" (3) Overall Length - Carbide Retaining Ring Grooving Right Hand, AlTiN Coated

0.5000" (1/2) Shank DIA x 60? included Carbide Tipped Engraver, n/a Flutes, AlTiN Coated

0.500\

0.6250" (5/8) Cutter DIA x 1.250" (1-1/4) Length of Cut x 120? included Carbide Drill/End Mill, 2 Flutes, AlTiN Coated

0.7500" (3/4) Cutter DIA x 2.500" (2-1/2) Length of Cut Carbide Square End Mill for Steels and High Temperature Alloys, 4 Flutes

0.7500" (3/4) Min Bore DIA x 0.2500" (1/4) Tooth Width x 0.2500" (1/4) Projection x 0.7500" (3/4) Shank DIA x 4.00" (4) Overall Length - Carbide Face Grooving Right Hand, AlTiN Coated

1.000 mm Cutter DIA x 0.10 mm Radius x 1.50 mm Length of Cut x 4.00 mm Reach Carbide Corner Radius End Mill for Steels and High Temperature Alloys, 2 Flutes

1.000 mm Cutter DIA x 0.20 mm Radius x 1.50 mm Length of Cut x 4.00 mm Reach Carbide Corner Radius End Mill for Steels and High Temperature Alloys, 2 Flutes

1.20mm Diameter Metric Mini Nano 2 Flute End Mill Coated Nano-Tek Micro-100 Part # MEFM-012-1200K

1.20mm Metric Mini Nano Ball Nose 2 Flute End Mill Coated Nano-Tek .075\

1.50mm Metric Mini Nano Ball Nose 2 Flute End Mill Coated Nano-Tek .090\

1/4\

1/8\

10.000 mm Min Bore DIA x 40.00 mm Max Bore Depth x 1.190 mm Tooth Width x 2.740 mm Projection x 10.000 mm Shank DIA x 72.0 mm Overall Length - Carbide Retaining Ring Grooving Right Hand, AlTiN Coated

14T390

1mm Diameter Mini Nano Ball Nose 2 Flute End Mill Micro-100 Part # BEFM-010-900

2.50mm Metric Mini Nano Ball Nose 2 Flute End Mill .090\

2mm Diameter Metric Mini Nano 2 Flute End Mill Coated Nano-Tek Micro-100 Part # MEFM-020-1200K

2mm Diameter Metric Mini Nano 2 Flute End Mill Micro-100 Part # MEFM-020-1200-25

2mm Minimum Bore Carbide Boring Bar (Metric) - Right Hand Sharp Coated 2.00 mm Min Bore DIA x x 13.00 mm Max Bore Depth 2.160 mm Tooth Width 0.51 mm Projection x x 4.000 mm Shank DIA x 50.0 mm Overall Length - Carbide Boring Standard Right Hand, AlTiN Coated Micro-100 Solid Super Carbide Boring Bars are Manufactured to bore in most Machining applications. These are offered in standard corner Radius and Sharp Corners. With a good selection of Minimum Bores Micro-100 also offers a good selection of bore depths. We offer these Uncoated, TiN and ALTiN Coated. All Micro-100 Carbide Tools has superior rupture strength and is highly shock resistant as it will not chip or break under normal machining conditions. Micro-100 Part # BBM-040213X

3/16\

3/8\

3mm Metric Mini Nano Ball Nose 2 Flute End Mill .090\

3mm Minimum Bore Carbide Boring Bar (Metric) - Right Hand Sharp Coated 3.00 mm Min Bore DIA x x 15.00 mm Max Bore Depth 2.160 mm Tooth Width 0.76 mm Projection x x 4.000 mm Shank DIA x 50.0 mm Overall Length - Carbide Boring Standard Right Hand, AlTiN Coated Micro-100 Solid Super Carbide Boring Bars are Manufactured to bore in most Machining applications. These are offered in standard corner Radius and Sharp Corners. With a good selection of Minimum Bores Micro-100 also offers a good selection of bore depths. We offer these Uncoated, TiN and ALTiN Coated. All Micro-100 Carbide Tools has superior rupture strength and is highly shock resistant as it will not chip or break under normal machining conditions. Micro-100 Part # BBM-040315X

4.000 mm Cutter DIA x 0.25 mm Radius x 5.00 mm Length of Cut x 30.00 mm Reach Carbide Corner Radius End Mill for Steels and High Temperature Alloys, 2 Flutes, nACRo? Coated

4.000 mm Cutter DIA x 1.00 mm Radius x 5.00 mm Length of Cut x 30.00 mm Reach Carbide Corner Radius End Mill for Steels and High Temperature Alloys, 2 Flutes, nACRo? Coated

4mm Diameter Metric Mini Nano 2 Flute End Mill Micro-100 Part # MEFM-040-500-25

5.000 mm Cutter DIA x 6.00 mm Length of Cut Carbide Ball End Mill for Steels and High Temperature Alloys, 2 Flutes, nACRo? Coated

5.000 mm Cutter DIA x 6.00 mm Length of Cut x 25.00 mm Reach Carbide Square End Mill for Steels and High Temperature Alloys, 2 Flutes

5.80 mm Min Bore DIA x 25.00 mm Max Bore Depth 1.750 mm Tooth Width 1.50 mm Projection x 8.000 mm Shank DIA x 63.0 mm Overall Length x 0.050 mm Radius 1.25-2.0 - Carbide UN Thread Right Hand, AlTiN Coated

5/8\

6.00 mm Min Bore DIA x 20.00 mm Max Bore Depth 0.510 mm Tooth Width 1.24 mm Projection x 6.000 mm Shank DIA x 57.0 mm Overall Length - Carbide Retaining Ring Grooving Right Hand, AlTiN Coated

6.00 mm Min Bore DIA x 35.00 mm Max Bore Depth 3.810 mm Tooth Width 1.50 mm Projection x 6.000 mm Shank DIA x 57.0 mm Overall Length - Carbide Boring Standard Right Hand, AlTiN Coated

8mm Diameter Carbide End Mill - 4 Flute Stub Variable Helix Cr Micro-100 Part # VHSM-080-4

9.00 mm Min Bore DIA x 50.00 mm Max Bore Depth 5.080 mm Tooth Width 2.26 mm Projection x 10.000 mm Shank DIA x 72.0 mm Overall Length - Carbide Boring Standard Right Hand, AlTiN Coated

AEMM-160-3

Ball End Mill, 1/2 in Milling Dia., Carbide, AlTiN, Non-Coolant Through

Ball End Mill, 1/2 in Milling Dia., Carbide, Bright (Uncoated), Non-Coolant Through

Ball End Mill, 3 mm Milling Dia., Carbide, AlTiN, Non-Coolant Through

Ball End Mill, 3/16 in Milling Dia., Carbide, AlTiN, Non-Coolant Through

Ball End Mill, 6 mm Milling Dia., Carbide, Bright (Uncoated), Non-Coolant Through

Corner Radius End Mill - Grainger

Corner Radius End Mill, 1 in Milling Dia., Carbide, AlTiN, Straight, Fractional Inch, 0.03 in, 1 1/2 in, 4 in

Corner Radius End Mill, 1.00 mm Milling Dia., Carbide, AlTiN, Straight, Metric, 0.10mm, 1.00 mm, 57.00 mm

Corner Radius End Mill, 1/2 in Milling Dia., Carbide, AlTiN, Straight, Fractional Inch, 0.03 in, 1 in, 3 in

Corner Radius End Mill, 1/2 in Milling Dia., Carbide, ZrN, Straight, Fractional Inch, 0.03 in, 1 in, 3 in

Corner Radius End Mill, 1/4 in Milling Dia., Carbide, AlTiN, Straight, Fractional Inch, 0.03 in, 3/4 in, 2 1/2 in

Corner Radius End Mill, 1/8 in Milling Dia., Carbide, AlTiN, Straight, Fractional Inch, 0.01 in, 1/2 in, 1 1/2 in

Corner Radius End Mill, 1/8 in Milling Dia., Carbide, nACRo, Straight, Fractional Inch, 0.005 in, 1/8 in, 2 in

Corner Radius End Mill, 3/8 in Milling Dia., Carbide, AlTiN, Straight, Fractional Inch, 0.03 in, 7/8 in, 2 1/2 in

Corner Radius End Mill, 5/16 in Milling Dia., Carbide, AlTiN, Straight, Fractional Inch, 0.01 in, 13/16 in, 2 1/2 in

Corner Radius End Mill, 5/16 in Milling Dia., Carbide, AlTiN, Straight, Fractional Inch, 0.02 in, 1/2 in, 2 1/2 in

Countersink,AlTiN,120 deg. Angle,2" L

Countersink,AlTiN,82 deg. Angle,2-1/2" L

DM-437-2120X

Drill Mill, Carbide, Bright (Uncoated), 10.000 mm Milling Dia., 90 Degrees

Drill Mill, Carbide, Bright (Uncoated), 6.000 mm Milling Dia., 90 Degrees

Drill/End Mill, 2 & 4 Flute, 0.1250" (1/8) Cutter dia, Finish: UN

Drill/End Mill, 2 & 4 Flute, 0.5000" (1/2) Cutter dia, Finish: UN

Drill/End Mill, 2 & 4 Flute, 0.4375" (7/16) Cutter dia, Length of Cut: 1"

End Mill (Metric) - 4 Fl 30 Deg Hard Milling Ball Nose Micro-100 Part #HMBM-080-4

End Mill - 4 Flt Long Reach Reduced Neck Variable Helix

End Mill - 5 Flt Long Length Variable Helix Coated Nano-Tek Micro-100 Part #VLM-250-5K

End Mill - 5Flt Long Reach Reduced Neck CR Variable Helix Coated Nano-Tek

End Mill, 2 Flute, Ball, 4.0 mm Cutter dia

End Mill, 2 Flute, Ball,2.500 mm Cutter dia

End Mill, 2 Flute, Ball,3.0 mm Cutter dia

End Mill, 2 Flute, Ball,4.0 mm Cutter dia

End Mill, 2 Flute, Corner Radius, 0.500 mm Cutter dia

End Mill, 2 Flute, Corner Radius, 1.500 mm Cutter dia

End Mill, 2 Flute, Corner Radius,0.2500" (1/4) Cutter dia

End Mill, 2 Flute, Corner Radius,0.600 mm Cutter dia

End Mill, 2 Flute, Square,0.800 mm Cutter dia

End Mill, 4 Flute, Corner Radius,8.0 mm Cutter dia

Engraving Tool, Single End, 60 Degrees , Carbide, Bright (Uncoated), Fractional Inch, 0.0100 in, 1/2 in

GELM-040-2

GEMM-030-2X

Grainger.com