Manufacturer: Avenview Corp

Products with this attribute (7 total)

Avenview <strong>HBT-C6POE-EX</strong> HDBaseT&trade; Repeater simply allows HDBaseT systems to be both extended and cascaded. Supports the highest quality of uncompressed HD video up to 4K?2K (Ultra HD) also 8 channels of uncompressed multi-channel audio. Built in data functions - RS-232 and IR control systems, this unit also supports PoE and Ethernet. HDBaseT 5Play&trade; convergence over a single CAT5e/6/7 cable.</p><p><strong>Note:</strong> The PoE function is designed for powering compatible Receiver units only. The non-PoE Receivers has to be powered with a power supply. Receivers (Rx) from different manufactures would not be compatible. Displaying HDMI 4Kx2K resolution would require the standard 4Kx2K HDMI cable and display for accurate results.</p>
Avenview C-MDP-DVI The Mini DisplayPort to DVI converter enable you to connect any DVI interface embedded device (Monitor, Projector etc.) with a Mini DisplayPort interface (Desktop, Laptop) and no need to purchase any DisplayPort embedded terminal device</p>
Avenview FO-DP-300-EMI, DisplayPort Extender over Single SC Fiber Optic is designed to let digital flat panel display extend around 1000 meters (3,3000 feet) away from host based on DisplayPort-1.1a standard by optical transmission technology. Its small package and transmit up to four video and one low-speed lane, while simultaneously receiving one low-speed signal, all on one multimode fiber.</p>
The Avenview FO-DVI-1080LC-SET, DVI Extender over Fiber Optic DVI extension system is designed to let digital flat panel display extend over 500m (1650 feet) away from host based on DVI standard by optical transmission technology. </p><p>Its small package and pseudo DDC detect function and Self-EDID detect function to use standard LC fiber connector allow users to install and utilize the device conveniently.</p>
The Avenview HBT-C6POE-R HDBaseT Receiver CAT5/6/7 with POE, Bi-Directional IR and Ethernet has been designed to extend High Definition video and multi-channel digital audio formats to any HD Monitor.<br />Video Signals: 4K2K@30 (Ultra HD), 3D, Deep Color, and Full HD 1080p 36-bit color depth.<br />Audio signals: Lossless Multi-channel audio formats (DTS-HD Master Audio, Dolby TrueHD).<br />Data Signals: Bi-Directional IR signals 30 KHz to 50 KHz over CAT5/6.</p><p>The HBT-C6POE-R includes one (1) unit: Receiving unit (Rx) HBT-C6POE-R with one (1) UTP output port which allows the user to extend video and audio up to 100m (330ft). The HBT-C6POE-R also allows bi- directional IR control of the source connected to the unit from the users IR remote control at the monitor side.</p><p>The bonus features with this device it can support PoE (Power over the CATx cable to the RX) also Internet (100Mbps Ethernet service when connected to a Router). These features has been added to this unit to give the installer and user a complete solution with the new trends in online streaming, network connected devices and new demand in Smart TV, Ultra HD monitors and content.</p>
The Avenview SPLIT-HDM2-T4K-2/4/8 (2, 4 or 8 Ports) HDMI Splitter can support the new industry of video signals 4K@60 and UHD. This device allows the input (source as 4K GPU graphic card or UHD Digital Player) to be duplicated onto 4 4K@60 or UHD displays. The SPLIT-HDM2-T4K-2/4/8 supports both video and audio signals simultaneously, reproducing the same quality via HDMI cable with EDID management.</p><p>Video Signals: 4K@60 HDR(4:2:0 10bits) / (4:4:4 8bits), 4K@30, UHD, 3D, Deep Color, and 1080p 24-bit color depth.<br />Audio Signals: DTS-HD Master Audio, Dolby TrueHD Dolby Digital, DTS, DVD-Audio, LPCM, SACD, MPCM</p><p>The SPLIT-HDM2-T4K includes one unit: 2, 4 or 8 ports SPLITTER with one (1) HDMI Input that can extend up to 5m (16ft) and four (4) output ports (available in 2 and 8 outputs) which allows the user to extend over HDMI cable video and audio up to 5m (16ft).</p>
The DVI-SPLITPRO-4X Quad Screen Video Processor with IR Remote Control is an advanced video processor for multimedia presentations. It is an ideal solution for applications where up to four video signals must be displayed on a single display. It supports up to 16 video inputs, of which four can be outputted simultaneously with the desired display layout through software control. The advanced video processor allows you to manipulate output images, wherever positions and whatever sizes you want for viewing two computers or two video signals or a combination.</p><p>The embedded scaler converts signals from input sources to match the native resolution of monitors, flat panel displays, projectors as well as user-selectable output settings up to WUXGA (1920x1200). Dual outputs are provided in both analog (VGA) and digital (DVI) format, one is connected to remote display and the other is connected to on-site display for real time monitoring.</p>