Manufacturer: Chief Mounts

Products with this attribute (89 total)

A 5" (127 mm) ceiling plate is a cost effective solution for simple installations.</p>
A great solution for mounting a medium size flat panel display on a pole.</p>
A single-screen ceiling mount for flat panel TVs that combines Chief's exclusive Centris tilt with quick ceiling mount installation.</p><p>Ceiling plate and extension column (Adjustable and Fixed) are required and must be ordered separately to fit your specific installation requirements</p>
A swivel table stand designed to hold medium flat panel monitors or TVs.</p><p>* Use Chief's MountFinder Pro to confirm the compatibility of this mount with your screen and determine if an interface bracket must be ordered.</p>
Chief <b>TIL1X2IF</b> was built for the Samsung&reg; IFH Series. Mounts two LED displays. Connects to sides, top and bottom of other TiLED Series mounts to create video wall configurations up to seven columns wide.</p>
Chief <strong>RPAO-G</strong> is Chief's 1st generation of low profile Universal Projector Mounts. The top-selling projector mount in the industry! Its perfect for stocking dealers or unplanned installations where the projector type is unknown.</p>
Chief upgraded fixed wall mounts based on installer feedback and direct observations of installers in the field. Many new features join Fusion favorites like Centerless shift, Centris tilt, ControlZone leveling adjustment and ClickConnect Latching. </p><p>New benefits included added stability, faster install, improved lateral shift, easier cable management and enhanced security.</p><p>Installer-inspired Fusion tilt mount solves top flat panel installation problems, offering flexible adjustments for large displays with a low-profile display mounting solution.</p>
Chief upgraded fixed wall mounts based on installer feedback and direct observations of installers in the field. Many new features join Fusion favorites like Centerless shift, ControlZone leveling adjustment and ClickConnect Latching. </p><p>New benefits included added stability, faster install, improved lateral shift, easier cable management and enhanced security.</p><p>Installer-inspired Fusion fixed mount solves top flat panel installation problems, offering flexible adjustments for large displays with a low-profile display mounting solution.</p>
Chief's <strong>ECR-12\16ST</strong> is a Steel Elite Converta Rack that provides security without compromise. This racks feature a 12U mixer pop-up rack and 16U rack for additional equipment in the bottom. </p><p>This product is finished in a Silver and Black Powder Coated Steel, Includes casters, front and rear rack rail, and locking steel front and rear doors.</p>
Chief's <strong>FMSIML</strong> is a large micro-adjustable tilt Interface that connects displays to the extrusions.</p>
Chief's <strong>HB100B</strong> is a custom VCM Interface Bracket that is designed for your specific projector for a fast and easy install. Custom hardware also included.</p><p><strong>Please Note:</strong> Use the mount finder below to determine which projector fits with this bracket</p><p><br /></p><p><a href="https://www.legrandav.com/products/chief" target="_blank" rel="noopener"><img src="https://www.markertek.com/LogoImages/Chief-Mountfinder-Black.jpg" alt="Chief Mount Finder Logo" width="120" height="90"></a></p>
Chief's <strong>HB76P</strong> is a custom VCM Interface Bracket that is designed for your specific projector for a fast and easy install. Custom hardware also included.</p><p><strong>Please Note:</strong> Use the mount finder below to determine which projector fits with this bracket</p><p><br /></p><p><a href="https://www.legrandav.com/products/chief" target="_blank" rel="noopener"><img src="https://www.markertek.com/LogoImages/Chief-Mountfinder-Black.jpg" alt="Chief Mount Finder Logo" width="120" height="90"></a></p>
Chief's <strong>HB94C</strong> is a custom VCM Interface Bracket that is designed for your specific projector for a fast and easy install. Custom hardware also included.</p><p><strong>Please Note:</strong> Use the mount finder below to determine which projector fits with this bracket</p><p><br /></p><p><a href="https://www.legrandav.com/products/chief" target="_blank" rel="noopener"><img src="https://www.markertek.com/LogoImages/Chief-Mountfinder-Black.jpg" alt="Chief Mount Finder Logo" width="120" height="90"></a></p>
Chief's <strong>JWS210B</strong> is a single arm wall display mount that provides a broad range of motion for viewing medium flat panel displays and monitors from multiple angles. It is an ergonomic solution for the home or office providing excellent adjustability and it folds in close to the wall for a low-profile appearance.</p><p><strong>Please use the Mount finder below to determine if this is the correct mount for your monitor.</strong></p><p><br /></p><p><a href="https://www.legrandav.com/products/chief" target="_blank" rel="noopener"><img src="https://www.markertek.com/LogoImages/Chief-Mountfinder-Black.jpg" alt="Chief Mount Finder Logo" width="120" height="90"></a></p>
Chief's <strong>KMA220B</strong> allows you to view two flat panel screens side-by-side with a pivot or swing arm wall or desk mount.</p>
Chief's <strong>KWS320S</strong> wall mount offers the ability to mount multiple screens horizontally and lock them in the same plane for viewing convenience.</p>
Chief's <strong>LCB2X1U</strong> FUSION&trade; ceiling mounted solutions make it possible to construct menu boards in prominent locations where walls aren't available. Combine to easily create longer menu boards. Great for digital signage installations.</p><p>Screen array configuration: Screens Wide x Screens High.</p>
Chief's <strong>LCM1X2U</strong> FUSION ceiling mounted stacking solution make it possible to install multiple displays vertically. Great for digital signage installations.</p>
Chief's enhanced Kontour K1D Dynamic Height-Adjustable Desk Clamp Mounts are the perfect monitor mount solutions for the office, healthcare facilities or home. Best-in-class weight capacity range makes specification simple!</p><p>Key enhancements have been made to Chief's patented Centris Extreme Tilt technology for the ultimate in effortless fingertip monitor positioning. Kontour monitor mounts float your displays in the optimal ergonomic position above your work surface to create a more productive and comfortable work space.</p>
Chief's enhanced Kontour K1S Dynamic Height-Adjustable Slatwall Mounts are perfect solutions for the office, healthcare facilities, and public spaces.</p><p>Key enhancements have been made to Chief's patented Centris Extreme Tilt technology, for the ultimate in effortless fingertip monitor positioning. Kontour monitor mounts float your displays in the optimal ergonomic position to create a more productive and comfortable work environment.</p><p><strong>Please use the Mount finder below to determine if this is the correct mount for your monitor.</strong></p><p><br /></p><p><a href="https://www.legrandav.com/products/chief" target="_blank" rel="noopener"><img src="https://www.markertek.com/LogoImages/Chief-Mountfinder-Black.jpg" alt="Chief Mount Finder Logo" width="120" height="90"></a></p>
Chief's enhanced Kontour K1W Dynamic Height-Adjustable Wall Mounts are perfect solutions for the office, healthcare facilities, and public spaces.</p><p>Key enhancements have been made to Chief's patented Centris Extreme Tilt technology, for the ultimate in effortless fingertip monitor positioning. Kontour monitor mounts float your displays in the optimal ergonomic position to create a more productive and comfortable work environment.</p><p><strong>Please use the Mount finder below to determine if this is the correct mount for your monitor.</strong></p><p><br /></p><p><a href="https://www.legrandav.com/products/chief" target="_blank" rel="noopener"><img src="https://www.markertek.com/LogoImages/Chief-Mountfinder-Black.jpg" alt="Chief Mount Finder Logo" width="120" height="90"></a></p>
Chief's enhanced Kontour K2C Manual Height-Adjustable Column Mount Articulating Arms are a great solutions for the office, healthcare facilities or home. K2C mounts provide manual height adjustment on the Column for optimal ergonomic positioning.</p><p>Kontour monitor mounts float your displays in the optimal ergonomic position above your work surface to create a more productive and comfortable work environment.</p><p><strong>Please use the Mount finder below to determine if this is the correct mount for your monitor.</strong></p><p><br /></p><p><a href="https://www.legrandav.com/products/chief" target="_blank" rel="noopener"><img src="https://www.markertek.com/LogoImages/Chief-Mountfinder-Black.jpg" alt="Chief Mount Finder Logo" width="120" height="90"></a></p>
Chief's enhanced Kontour K2C Manual Height-Adjustable Column Mount Articulating Arms are a great solutions for the office, healthcare facilities or home. Provides manual height adjustment on the Column for optimal ergonomic positioning.</p><p>Kontour monitor mounts float your displays in the optimal ergonomic position above your work surface to create a more productive and comfortable work environment.</p><p><strong>Please use the Mount finder below to determine if this is the correct mount for your monitor.</strong></p><p><br /></p><p><a href="https://www.legrandav.com/products/chief" target="_blank" rel="noopener"><img src="https://www.markertek.com/LogoImages/Chief-Mountfinder-Black.jpg" alt="Chief Mount Finder Logo" width="120" height="90"></a></p>
Chief's enhanced Kontour K2W Wall Mount Articulating Arms are great solutions for the office, healthcare facilities, or public spaces. The K2W mounts provide unlimited manual height adjustment on the Pole for optimal ergonomic positioning for any application.</p><p>Kontour monitor mounts float your displays in the optimal ergonomic position above your work surface to create a more productive and comfortable work environment.</p><p><strong>Please use the Mount finder below to determine if this is the correct mount for your monitor.</strong></p><p><br /></p><p><a href="https://www.legrandav.com/products/chief" target="_blank" rel="noopener"><img src="https://www.markertek.com/LogoImages/Chief-Mountfinder-Black.jpg" alt="Chief Mount Finder Logo" width="120" height="90"></a></p>
Chief's Fusion ceiling mounted solutions make it possible to construct menu boards in prominent locations where walls aren't available. The <strong>FCAB3X1UP</strong> can be used to retrofit single sided 3 x 1 ceiling configurations to be back-to-back solutions. </p><p>Screen array configuration: screens wide x screens high<br />Confirm screen compatibility with MountFinder</p>
Flexibility meets form and function with the K3 Series of elegantly designed, solid array mounts from Chief.</p><p>Provides an aesthetic, stable solution for call centers, security desks, IT, health care, control rooms and other multiple monitor settings.</p><p>Desk Clamp accessory is available for all K3 Series array mounts.</p>
Flexibility meets form and function with the K3 Series of elegantly designed, static array mounts from Chief.</p><p>Chief's <strong>K3F120S</strong> provides an aesthetic, stable solution for call centers, security desks, IT, health care, control rooms and other multiple monitor settings.</p><p>Desk Clamp accessory is available for all K3 Series array mounts.</p><p><strong>Please use the Mount finder below to determine if this is the correct mount for your monitor.</strong></p><p><br /></p><p><a href="https://www.legrandav.com/products/chief" target="_blank" rel="noopener"><img src="https://www.markertek.com/LogoImages/Chief-Mountfinder-Black.jpg" alt="Chief Mount Finder Logo" width="120" height="90"></a></p>
Fusion Universal Back Covers provide an aesthetic solution for cleaning up the exposed mount, cabling and other hardware behind displays. The Chief <b>FCAC1LB</b> works with Fusion series single ceiling mounts LCM1U, MCM1U, LCM1X2U and MCM1X2U.</p>
Fusion Universal Back Covers provide an aesthetic solution for cleaning up the exposed mount, cabling and other hardware behind displays. The Chief <b>FCAC2X1MB</b> works with Fusion series ceiling mounts, carts and bolt-down video walls with two displays side-by-side.</p>
Ideal for interactive applications, Fusion mounts with dynamic height adjust capability create better accessibility to technology in the boardroom and the classroom. The height adjustable box provides ultra-smooth and fast vertical travel with almost no effort. </p><p>Easy to install. Easy to adjust.</p><p>This solution is especially helpful for applications where the wall structure can't carry the weight. </p>
Ideal for smaller projector models, these custom miniature versions of the RPA Elite mounts include all the same great features in almost half the size. </p>
Ideal for smaller projector models, these miniature versions of the RPA Elite ceiling projector mounts include all the same great features in almost half the size.</p>
Match your Rack! With Chief's <strong>ERKD-8MR</strong> add a Maple laminate rear door for your 8U Elite rack to finish off the appearance and add aditional security.</p>
Precise positioning including vertical projector cradle adjustment and fore/aft projector positioning<br />Quick connect/disconnect for convenient lamp and filter access on most projectors<br />Maintains registration even when disconnected<br />Independent roll, pitch and yaw<br />Low profile, requires minimal clearance above the ceiling<br />Easy installation, fits into a 2' x 2' suspended ceiling<br />Multiple installation options: three 0.38" (10 mm) threaded rods, 1.5" NPT threaded extension column with SMA602 accessory, or side mount with built-in joist tabs<br />UL Listed</p>
Quick, easy and versatile, the Truss/Pole Static Mounts, Pole Tilt-Adjustable Mounts and Truss Tilt-Adjustable Mounts are often used for mounting the large flat panel displays used in exhibit, retail and digital signage.</p><p>Clamps for different size poles and truss work are required and must be ordered separately</p>
Simplify ordering and installation with this preconfigured kit of projector ceiling mount products. Kit includes a universal projector mount (RPAU), an adjustable extension column (CMS018024) and a designer ceiling plate (CMA101). </p>
Simplify ordering and installation with this preconfigured kit of projector ceiling mount products. Kit includes: (1) RPAU, (1) CMS003 and (1) CMS115.</p>
Simplify ordering and installation with this preconfigured kit of projector ceiling mount products. Kit includes: (1) RPAU, (1) CMS0203 and (1) CMS115.</p>
Simplify ordering and installation with this preconfigured kit of projector ceiling mount products. Kit includes: (1) RPAUW, (1) CMS003W and (1) CMA455.</p>
The <strong> CMS440P2</strong> above-ceiling tile kit from Chief provides a host of features that make installing most lightweight front projectors faster and more secure. Some of these features include: a high-performance, dual gang housing, isolated ground, dual receptacle outlet featuring the SurgeX non-sacrificial multi-stage filtration as well as a surge protection system which will protect your valuable equipment from disruptive high frequency noise and damage caused by power disturbances.</p><p>Chief's powered solutions were co-developed with SurgeX, a brand of AMETEK Electronic Systems Protection.</p><p><b>PLEASE NOTE:</b> Column and projector mount not included, must be purchased separately.</p>
The <strong> ROTR-XX</strong> is a Rotating equipment rack without rack rails. Keep your inventory down and availability up by stocking racks and rack rail separately. Pick the right rack and the right rack rail for your job. Use only Chief Rack Rails (RKRLXXSPACE) and order 1 pair of rack rail to complete rack. Rack includes cable management rack rail. Rack height should not exceed 24U. Finished rack Height = Rack Rail height<br /><strong>Please note:</strong> Image pictured may not represent actual product.</p>
The <strong>Chief MTMS1U</strong> is a single stud, medium fusion micro-adjustable tilt wall mount. Installer-inspired Fusion tilt mount solves top flat panel installation problems, offering flexible adjustments for medium displays with a low-profile display mounting solution. </p><p>This single stud Fusion mount hides better behind smaller narrow bezel displays in the 32-47" range. Many installer-friendly features of Fusion in a smaller form to create superior aesthetic results. The mount incorporates Fusion favorites like Centris tilt, ControlZone leveling adjustment and ClickConnect Latching.</p>
The <strong>CMA643</strong> is a decorative finishing trim ring for the outside of our CMS adjustable extension column pipe.</p>
The <strong>FCA530</strong> center channel speaker adapter is compatible with FUSION Series carts, stands, and flat panel ceiling mounts.</p>
The <strong>FCAX</strong> extension brackets can be used with the LVM, LBM, LCM floor and ceiling products to install larger displays and displays with wider mounting patterns. </p><p>Please order a quantity of 1 unit per row of monitors. For example, for an LVM3X2U, you would need 2 FCAX brackets.<br /> <br />Kits include two extension brackets (1 for each end of existing FUSION extrusion).</p>
The <strong>FCAX</strong> extension brackets can be used with the LVM, LBM, LCM floor and ceiling products to install larger displays and displays with wider mounting patterns. </p><p>Please order a quantity of 1 unit per row of monitors. For example, for an LVM3X2U, you would need 2 FCAX brackets.<br /> <br />Kits include two extension brackets (1 for each end of existing FUSION extrusion).</p>
The <strong>FSB4041</strong> is the perfect solution for interfacing with a variety of displays with 200x200mm VESA patterns with M8 hardware. Use with most Chief monitor or flat panel mounts.</p>
The <strong>KCD220</strong> offers the ability to ergonomically mount dual displays, and articulate them in and out for optimal ergonomic positioning.</p><p><strong>Please use the Mount finder below to determine if this is the correct mount for your monitor.</strong></p><p><br /></p><p><a href="https://www.legrandav.com/products/chief" target="_blank" rel="noopener"><img src="https://www.markertek.com/LogoImages/Chief-Mountfinder-Black.jpg" alt="Chief Mount Finder Logo" width="120" height="90"></a></p>
The <strong>KCD320</strong> offers the ability to ergonomically mount multiple displays, allowing for level viewing and assuring that your line of sight remains consistent. </p><p><strong>Please use the Mount finder below to determine if this is the correct mount for your monitor.</strong></p><p><br /></p><p><a href="https://www.legrandav.com/products/chief" target="_blank" rel="noopener"><img src="https://www.markertek.com/LogoImages/Chief-Mountfinder-Black.jpg" alt="Chief Mount Finder Logo" width="120" height="90"></a></p>
The <strong>KFA325</strong> allows easy mounting of three widescreen monitors on a cart or stand. It Supports widescreen monitors up to 25" wide side-by-side.</p>
The <strong>KRA227</strong> Dual Monitor Upgrade Kit provides a fast & easy means of adding a second arm to any single-arm KTA220B, K1P120, K1S120, or K1W120 mount; converting them into a dual-arm K1D220, K1P220, K1S220, or K1W220.</p>
The <strong>KSA1019</strong> accessory provides external tilt and roll friction adjustment.</p>
The <strong>KSA1020B</strong> is the perfect solution for integrating a CPU with your desk or wall mount.</p>
The <strong>KSA1024B</strong> is a quick release bracket for small flat panel display mounts.</p>
The <strong>KTA1007B</strong> is a Large Grommet Accessory for mounting pole-mounted multi-monitor arrays to a work surface.</p>
The <strong>KTG220B</strong> is a rock solid, bolt-down solution for graphic designers, broadcasters and other users who commonly work with multiple small flat panel TVs or monitors.</p><p>This provides ergonomic adjustability for hassle-free, fingertip positioning of each monitor.</p>
The <strong>KTG225S</strong> is a rock solid, bolt-down solution for graphic designers, broadcasters and other users who commonly work with multiple small flat panel TVs or monitors.</p><p>This provides ergonomic adjustability for hassle-free, fingertip positioning of each monitor.</p>
The <strong>KTP325B</strong> provides a rock solid, free-standing solution for graphic designers, broadcasters and other users who work with multiple small flat panel monitors.</p>
The <strong>LCDA225C</strong> mount is a universal projector ceiling mount for installations requiring upright LCD/DLP projectors.</p><p>Max Height: 10.8" - 16"<br />Max Width: 8.63" - 11.5"<br />Tray Depth: 17.75"</p>
The <strong>MFCUS700</strong> is a lightweight, mobile AV cart with a collapsible design that is perfect for rental and staging to corporate applications. MFCUB and MFCUS ship with a universal interface bracket MFC6000B and MFC6000S require an MSB interface to be purchased separately.</p><p><br /><strong>Please note:</strong> shelf accessory must be ordered separately, PAC710 height-adjustable accessory shelf shown.</p>
The <strong>MPTUB</strong> is a 9 inch medium flat panel swing arm wall mount for TVs, displays and monitors. This unit provides a very low profile in home position.</p>
The <strong>MPTVB</strong> is a 9 inch medium flat panel swing arm wall mount for TVs, displays and monitors. This unit provides a very low profile in home position.</p>
The <strong>PAC526FWP4</strong> The PAC526FWP4 simplifies flat panel installation by providing an organized, recessed space for routing excess cables. The addition of the flange adds an aesthetic trimmed appearance and drywall mounting capability. </p><p>Includes a high-performance, dual gang housing, isolated ground, 4-receptacle outlet featuring the SurgeX&reg; non-sacrificial multi-stage filtration and surge protection system. This protects equipment from disruptive high frequency noise and damage caused by power disturbances.</p><p>Chief's powered solutions were co-developed with SurgeX, a brand of AMETEK&reg; Electronic Systems Protection.</p><p>Compatible with the PST, PRO, PLP, MSR, MTR, MWH, MWR, PWR, PNR, PDR, Thinstall, and FUSION wall mounts.</p>
The <strong>PAC775</strong> outdoor casters help to reduce vibration transmitted to equipment.</p>
The <strong>PAC900</strong> is a durable custom case for storage of the PRSU Portable Flat Panel Stand. Two wheels on each end make transportation easier. Can be stacked or stored standing on end. </p>
The <strong>PF12000B</strong> is a solid, low-profile solution for mounting a flat panel on a floor AV stand. This unit is ideal for digital signage and corporate presentations. PF1UB and PF1US ship with a universal interface bracket. PF12000B and PF12000S require a PSB interface to be purchased separately.</p>
The <strong>SSMUS</strong> is a universal RSM interface bracket for projector mounts. This unit has all the same great features as the SLM but in a more compact design!</p><p>The SSM Interface Bracket is required for installation with the Mini Elite RPA Projector Mount.</p>
The Chief <strong>CMS491</strong> conceals AV equipment above a 2' X 2' ceiling tile to provide a clean professional look for classrooms and conference rooms.</p>
The Chief <strong>CMSUNV2</strong> can be ordered to add an additional shelf to the CMS492 2' x 2' plenum rated storage box.</p>
The Chief <strong>ECR-12\16STSL</strong> is a Steel Elite Converta Rack that provide security without compromise. This racks feature a 12U mixer pop-up rack and 16U rack for additional equipment in the bottom. </p><p>This product is finished in Silver and Black Powder Coated Steel, includes a side pop-up shelf, casters, front and rear rack rail, and locking steel front and rear doors.</p>
The Chief <strong>FMSH108</strong> is a 108 inch single horizontal extrusion that aligns screens quickly and easily.</p>
The Chief <strong>VCM018E</strong> heavy duty custom ceiling projector mount provides the strong support you need for mounting heavy LCD/CRT projectors.</p>
The Chief FSB4226B is a custom interface bracket compatible with all Chief F-series and K-series mounts. Additionally, FSB interface brackets allow a non-VESA compatible screen to be installed on any Chief Small Flat Panel Mounting Solution.</p>
The Chief Kontour K1C120S with Steelcase FrameOne Interface provides for fast & easy installation to the FrameOne office furniture system.</p><p>The enhanced Kontour K1C Dynamic Height-Adjustable Column Mounts are the perfect solutions for the office, healthcare facilities or home. Provides the maximum amount of both dynamic and manual height adjustment for the ultimate ergonomic solution.</p><p>Key enhancements have been made to Chief's patented Centris Extreme Tilt technology for the ultimate in effortless fingertip monitor positioning. Kontour monitor mounts float your displays in the optimal ergonomic position above your work surface to create a more productive and comfortable work environment.</p>
The CMA151 easily adapts a 1.5" NPT threaded fitting to a 1" NPT threaded column.</p><p>Compatible with Chief's CMA or CMS accessories, and the RPA Series projector mounts</p>
The CMS Speed-Connect Adjustable Extension Columns lower projector to desired height.</p>
The installer-inspired <strong>STMS1U</strong> Fusion tilt mount solves top flat panel installation problems, offering flexible adjustments for small displays with a low-profile display mounting solution.</p><p>This single stud Fusion mount hides better behind narrow bezel displays in the 24-32" range. Many installer-friendly features of Fusion in a smaller form to create superior aesthetic results.</p><p>The mount incorporates Fusion favorites like Centris tilt, ControlZone leveling adjustment and ClickConnect Latching.</p>
The PAC102 accessory shelf makes component installation fast and simple for pole installations.</p><p>Quickly installs to standard 1.5" NPT extensions columns<br />Includes all necessary installation hardware<br />Shelf cover included for a finished look<br />Dimensions (HxWxD): 2.18" x 14" x 10.4" (55 x 356 x 264 mm)<br />Color: Black or Silver<br />Weight Capacity: 20 lbs (9.1 kg)</p><p>*Shelf only; pipe and DVD player not included.</p>
The PAC735 provides secure storage for rack mount equipment, PCs, codecs and other large AV equipment.</p>
The WM110AUS projector short throw kit includes single stud short throw extension arm (WM110S) and Universal Mini RPA Elite projector mount (RSMAUS) to provide unparalleled flexibility, precision and strength.</p>
The WM220AUS projector short throw kit includes dual stud short throw extension arm (WM220S) and Universal Mini RPA Elite projector mount (RSMAUS) to provide unparalleled flexibility, precision and strength. </p><p>Also supports wall-mounted long-throw projectors.</p>
The WP22US provides ideal placement and alignment for mounting to wood studs, steel studs, and concrete.<br />Includes RPA mini universal projector mount (RSAUS).<br />Also supports wall-mounted long-throw projectors.</p>
This accessory shelf makes component installation fast and simple for wall installations.</p>
This pole mount easily attaches monitors to a pole and provides smooth pivot and tilt adjustment for optimal viewing of small flat panel TVs or monitors. </p><p>* Use Chief's MountFinder Pro to confirm the compatibility of this mount with your screen and determine if an interface bracket must be ordered.</p>
Use Chief's <strong>JWDSKUS</strong> to easily install a Chief dual swing arm wall mount to 16" 20" or 24" on-center steel studs.</p><p><strong>Please use the Mount finder below to determine if this is the correct mount for your monitor.</strong></p><p><br /></p><p><a href="https://www.legrandav.com/products/chief" target="_blank" rel="noopener"><img src="https://www.markertek.com/LogoImages/Chief-Mountfinder-Black.jpg" alt="Chief Mount Finder Logo" width="120" height="90"></a></p>
Use the <strong>OFB207</strong> to install any KONTOUR&trade; or K-series monitor arm wall mount on the Ergotron&reg wall track system.</p>
Use the enhanced Kontour <strong>KRA219B</strong> K1 & K2 Table Clamp Kit for installations when the gap between edge-of-table and rear wall panel is less than 1/2" (12.5 mm).</p>
View large flat panel displays from any angle with the <strong>PNR2000B</strong> large flat panel swing arm wall mount.</p>
View large flat panel displays from any angle. Includes the PSBU universal interface.</p>