PackageQuantity: ['1']

Products with this attribute (870932 total)

0.160" Min Bore DIA x 0.500" (1/2) Max Bore Depth 0.1250" (1/8) Tooth Width 0.040" Projection x 0.1875" (3/16) Shank DIA x 2.00" (2) Overall Length x 0.0060" Radius - Carbide Boring Standard Right Hand, AlTiN Coated

0.160" Min Bore DIA x 0.900" Max Bore Depth 0.1250" (1/8) Tooth Width 0.040" Projection x 0.1875" (3/16) Shank DIA x 2.00" (2) Overall Length x 0.0060" Radius - Carbide Boring Standard Left Hand, AlTiN Coated

0.16m, Mini DisplayPort - HDMI, m/f

0.172" Replacement Pin Gage P-1 -0.0002 Tolerance

0.180" Min Bore DIA x 0.350" Max Bore Depth 0.0460" Tooth Width 0.040" Projection x 0.2500" (1/4) Shank DIA x 2.50" (2-1/2) Overall Length x 0.0020" Radius #27-56 - Carbide UN Thread Right Hand, AlTiN Coated

0.180" Min Bore DIA x 0.350" Max Bore Depth 0.1500" Tooth Width 0.045" Projection x 0.2500" (1/4) Shank DIA x 2.50" (2-1/2) Overall Length - Carbide Boring Standard Right Hand, AlTiN Coated

0.180" Min Bore DIA x 0.350" Max Bore Depth 0.1500" Tooth Width 0.045" Projection x 0.2500" (1/4) Shank DIA x 2.50" (2-1/2) Overall Length x 0.0060" Radius - Carbide Boring Standard Left Hand, AlTiN Coated

0.180" Min Bore DIA x 1.000" (1) Max Bore Depth 0.1500" Tooth Width 0.045" Projection x 0.2500" (1/4) Shank DIA x 2.50" (2-1/2) Overall Length x 0.0060" Radius - Carbide Boring Standard Left Hand, AlTiN Coated

0.180" Min Bore DIA x 1.100" Max Bore Depth 0.1500" Tooth Width 0.045" Projection x 0.2500" (1/4) Shank DIA x 2.50" (2-1/2) Overall Length - Carbide Boring Standard Right Hand, AlTiN Coated

0.1800" Min Bore DIA x 0.750" (3/4) Max Bore Depth x 0.0460" Tooth Width x 0.0400" Projection x 0.2500" (1/4) Shank DIA x 2.50" (2-1/2) Overall Length x 0.0020" Radius #24-56 - Carbide UN Thread Left Hand, AlTiN Coated

0.180\

0.1875" (3/16) Cutter DIA x 0.015" (1/64) Radius x 0.200" Length of Cut x 1.500" (1-1/2) Reach Carbide Corner Radius End Mill for Steels and High Temperature Alloys, 2 Flutes

0.1875" (3/16) Drill DIA x 0.625" (5/8) Flute Length Carbide Quick Change - Spot Drill, 2 Flutes

0.1875" (3/16) Shank DIA x 30? included Carbide Tipped Engraver, n/a Flutes, AlTiN Coated

0.1875" (3/16) Shank DIA x 41? per side Carbide Flat Quick Change - Countersink and Chamfer Tool, 4 Flutes

0.1875" (3/16) Shank DIA x 50? per side Carbide Flat Quick Change - Countersink and Chamfer Tool, 4 Flutes

0.1875" (3/16) Shank DIA x 90? included Carbide Tipped Engraver, n/a Flutes, AlTiN Coated

0.1875\

0.187\

0.197" Replacement Pin Gage P-1 -0.0002 Tolerance

0.198" Min Bore DIA x 1.250" (1-1/4) Max Bore Depth 0.013" Projection x 0.2500" (1/4) Shank DIA x 2.50" (2-1/2) Overall Length - Carbide Boring Helical Back Rake Right Hand, AlTiN Coated

0.20% (w/v) Aqueous Startch Chemical Indicator Solution, 120 mL, Ricca R7999200-120A New Laboratory Setup Savings - up to 40%, Magnetic Stirrer, Vortex Mixer, Sample Prep, Centrifuge

0.200" Min Bore DIA x 0.700" Max Bore Depth 0.1500" Tooth Width 0.050" Projection x 0.2500" (1/4) Shank DIA x 2.50" (2-1/2) Overall Length x 0.0060" Radius - Carbide Boring Standard Left Hand, AlTiN Coated

0.200" Min Bore DIA x 1.000" (1) Max Bore Depth 0.1500" Tooth Width 0.050" Projection x 0.2500" (1/4) Shank DIA x 2.50" (2-1/2) Overall Length x 0.0060" Radius - Carbide Boring Standard Left Hand, AlTiN Coated

0.200" Min Bore DIA x 1.200" Max Bore Depth 0.1500" Tooth Width 0.050" Projection x 0.2500" (1/4) Shank DIA x 2.50" (2-1/2) Overall Length x 0.0060" Radius - Carbide Boring Standard Right Hand, AlTiN Coated

0.204" Replacement Pin Gage P-1 -0.0002 Tolerance

0.206" Replacement Pin Gage P-1 -0.0002 Tolerance

0.212" Replacement Pin Gage P-1 -0.0002 Tolerance

0.223" Replacement Pin Gage P-1 -0.0002 Tolerance

0.230" Min Bore DIA x 0.800" Max Bore Depth 0.2000" Tooth Width 0.057" Projection x 0.3125" (5/16) Shank DIA x 2.50" (2-1/2) Overall Length x 0.0060" Radius - Carbide Boring Standard Left Hand, AlTiN Coated

0.230" Min Bore DIA x 1.000" (1) Max Bore Depth 0.0640" Tooth Width 0.055" Projection x 0.3125" (5/16) Shank DIA x 2.50" (2-1/2) Overall Length x 0.0020" Radius #20-40 - Carbide UN Thread Left Hand, AlTiN Coated

0.230" Min Bore DIA x 1.250" (1-1/4) Max Bore Depth 0.2000" Tooth Width 0.057" Projection x 0.3125" (5/16) Shank DIA x 2.50" (2-1/2) Overall Length x 0.0060" Radius - Carbide Boring Standard Right Hand, AlTiN Coated

0.2301\

0.230\

0.231" Replacement Pin Gage P-1 -0.0002 Tolerance

0.2350\

0.240" Replacement Pin Gage P-1 -0.0002 Tolerance

0.25-5-VF16B TapeCase | Tapes, Adhesives, Materials | DigiKey Marketplace

0.25-5-VF16W TapeCase | Tapes, Adhesives, Materials | DigiKey Marketplace

0.25-6-1345

0.250 in. Wire x 2 in. D x 39 in. L Torsion Spring in Gold Right Wound for Sectional Garage Doors

0.250" (1/4) Min Bore DIA x 0.625" (5/8) Max Bore Depth 0.0170" Tooth Width 0.050" Projection x 0.2500" (1/4) Shank DIA x 2.50" (2-1/2) Overall Length - Carbide Retaining Ring Grooving Right Hand, AlTiN Coated

0.250" (1/4) Min Bore DIA x 0.625" (5/8) Max Bore Depth 0.0300" Tooth Width 0.050" Projection x 0.2500" (1/4) Shank DIA x 2.50" (2-1/2) Overall Length - Carbide Retaining Ring Grooving Left Hand, AlTiN Coated

0.2500" (1/4) Bore DIA x 22.000 mm Shank DIA x 3.00" (3) Overall Length - Quick Change - Star SW-20

0.2500" (1/4) Bore DIA x 22.000 mm Shank DIA x 3.49" Overall Length - Quick Change - Star SR20-RIV

0.2500" (1/4) Cutter DIA x 0.005" Radius x 0.250" (1/4) Length of Cut Carbide Corner Radius End Mill for Steels and High Temperature Alloys, 2 Flutes, nACRo? Coated

0.2500" (1/4) Cutter DIA x 0.750" (3/4) Length of Cut x 120? included Carbide Drill/End Mill, 4 Flutes, AlTiN Coated

0.2500" (1/4) Drill DIA x 0.750" (3/4) Flute Length Carbide Quick Change - Spot Drill, 2 Flutes, AlTiN Coated

0.2500" (1/4) Min Bore DIA x 0.375" (3/8) Max Bore Depth x 0.0300" Tooth Width x 0.0500" Projection x 0.2500" (1/4) Shank DIA x 2.50" (2-1/2) Overall Length x 0.0150" (1/64) Radius - Carbide Full Radius Grooving Right Hand, AlTiN Coated

0.2500\

0.255mm Powdered Metal 118? Point Micro Precision Stub Drill, Reinforced Straight Shank, Bright Finish, 1.9mm LOC 1.9mm LOC,25mm OAL,1mm Shank Series No. 301, Order Code 00.255, Guhring Part #9003010002550

0.25X4.0FLT304SS-4

0.280" Replacement Pin Gage P-2 0.0002 Tolerance

0.290" Min Bore DIA x 1.500" (1-1/2) Max Bore Depth 0.2000" Tooth Width 0.072" Projection x 0.3125" (5/16) Shank DIA x 2.50" (2-1/2) Overall Length x 0.0060" Radius - Carbide Boring Standard Left Hand, AlTiN Coated

0.290" Min Bore DIA x 1.600" Max Bore Depth 0.2000" Tooth Width 0.072" Projection x 0.3125" (5/16) Shank DIA x 2.50" (2-1/2) Overall Length x 0.0060" Radius - Carbide Boring Standard Right Hand, AlTiN Coated

0.2900" Min Bore DIA x 0.500" (1/2) Max Bore Depth x 0.0810" Tooth Width x 0.0700" Projection x 0.3125" (5/16) Shank DIA x 2.50" (2-1/2) Overall Length x 0.0020" Radius #14-40 - Carbide UN Thread Left Hand, AlTiN Coated

0.298" Replacement Pin Gage P-2 0.0002 Tolerance

0.303" Min Bore DIA x 1.000" (1) Max Bore Depth 0.0620" (1/16) Tooth Width 0.083" Projection x 0.3125" (5/16) Shank DIA x 2.50" (2-1/2) Overall Length x 0.0310" (1/32) Radius - Carbide Undercut Square Right Hand, AlTiN Coated

0.304" Replacement Pin Gage P-2 0.0002 Tolerance

0.312" (5/16) Min Bore DIA x 0.750" (3/4) Max Bore Depth 0.0380" Tooth Width 0.100" Projection x 0.3125" (5/16) Shank DIA x 2.50" (2-1/2) Overall Length - Carbide Retaining Ring Grooving Right Hand, AlTiN Coated

0.312" Replacement Pin Gage P-2 0.0002 Tolerance

0.3120\

0.3125" (5/16) Bore DIA x 16.000 mm Shank DIA x 2.35" Overall Length - Quick Change - Star SR-10J

0.3125\

0.31BFDSR02.00 - 0.31BFDSR02.00 | Wilson Company

0.31BFDSR03.00 - 0.31BFDSR03.00 | Wilson Company

0.31NSR01.00 - 0.31NSR01.00 | Wilson Company

0.31PSR01.00 - 0.31PSR01.00 | Wilson Company

0.320" Min Bore DIA x 0.900" Max Bore Depth 0.2000" Tooth Width 0.080" Projection x 0.3750" (3/8) Shank DIA x 2.50" (2-1/2) Overall Length - Carbide Boring Standard Right Hand, AlTiN Coated

0.320" Min Bore DIA x 1.100" Max Bore Depth 0.2000" Tooth Width 0.080" Projection x 0.3750" (3/8) Shank DIA x 2.50" (2-1/2) Overall Length x 0.0060" Radius - Carbide Boring Standard Right Hand, AlTiN Coated

0.320" Min Bore DIA x 1.250" (1-1/4) Max Bore Depth 0.0870" Tooth Width 0.075" Projection x 0.3750" (3/8) Shank DIA x 2.50" (2-1/2) Overall Length x 0.0020" Radius #10-32 - Carbide UN Thread Left Hand, AlTiN Coated

0.324" Replacement Pin Gage P-2 0.0002 Tolerance

0.326" Replacement Pin Gage P-2 0.0002 Tolerance

0.331" Replacement Pin Gage P-2 0.0002 Tolerance

0.33mm thickness glass, to prevent sharp objects from damaging screen. Powerful shock absorption screen protector. Great combination of clarity and protection. If Broken, the glass breaks into small pieces that are not sharp. Even sharp objects such as knives and keys will not scratch the glass. Dustproof durable enhance sense of handwriting. Includes microfiber cleaning cloth. Easy installation and removal, without any scratches on screen. This phone model is also known as LG V10/ H900/ VS990/ H901.

0.340" Min Bore DIA x 2.500" (2-1/2) Max Bore Depth 0.020" Projection x 0.3750" (3/8) Shank DIA x 4.00" (4) Overall Length - Carbide Boring Helical Back Rake Right Hand, AlTiN Coated

0.345" Replacement Pin Gage P-2 0.0002 Tolerance

0.349" Replacement Pin Gage P-2 0.0002 Tolerance

0.35 gpm Deck Mount Metal Standard Spout Assembly for TEL103-D20E

0.360" Min Bore DIA x 0.750" (3/4) Max Bore Depth 0.2000" Tooth Width 0.090" Projection x 0.3750" (3/8) Shank DIA x 2.50" (2-1/2) Overall Length x 0.0060" Radius - Carbide Boring Standard Right Hand, AlTiN Coated

0.360" Min Bore DIA x 1.250" (1-1/4) Max Bore Depth 0.2000" Tooth Width 0.090" Projection x 0.3750" (3/8) Shank DIA x 2.50" (2-1/2) Overall Length x 0.0060" Radius - Carbide Boring Standard Left Hand, AlTiN Coated

0.360\