ReleaseDate: ['2022-05-12']

Products with this attribute (246 total)

#1 CARBIDE AlTiN STUB DRILL 1-5/16\

#10 CARBIDE AlTiN STUB DRILL 1-3/16\

#21 4XD HP CARB nACRo DRILL 0.708\

#27 CARBIDE AlTiN STUB DRILL 1\

#3 x 82? Double End Carbide Center Drill (Combined Drill/Countersink), .2500\

#35 CARBIDE AlTiN STUB DRILL 7/8\

#36 CARBIDE AlTiN STUB DRILL 13/16\

#4 CARBIDE AlTiN STUB DRILL 1-1/4\

#48 4XD HP CARB nACRo DRILL 0.426\

#54 CARBIDE AlTiN STUB DRILL 1/2\

#9 CARBIDE AlTiN STUB DRILL 1-3/16\

10mm 4 Flute Square End Single End Carbide End Mill, TiN Coated, Regular Length, 22mm Flute Length, 76mm OAL 22MM LOC,10MM SHANK,76MM OAL 30? helix, right hand spiral, right hand cut, 4 flute square end center cutting single end general purpose carbide end mill with plain cylindrical shank. C-2 grade sub-micron grain carbide with 10% cobalt content. Four flute design offers increased core diameter which minimizes tool deflection & improves accuracy. For profiling, slotting, production milling & finishing applications in a wide range of ferrous metals, including stainless steels & high temp alloys. Made in the USA. GWS/Monster Tool Part #206-001400A

11.0mm Diameter Jobber Length Carbide Twist Drill, 118? Split Point, AlTiN Coated, 73mm Flute, 114mm OAL 73mm Flute Length,11.0mm Shank,114mm OAL GWS/Monster jobber length twist drills are made from C-2 Sub-Micron Grain Carbide With 10% Cobalt Content. 25? helix angle quickly evacuates chips and allows for increased feed rates. 118? split point for quick penetration without walking. The most versatile overall length lends this geometry to a multitude of uses. Optional AlTiN coating can increase feed rates by 40%. Made in the USA. GWS/Monster Tool Part #450-404331B

11mm 4 Flute Square End Single End Carbide End Mill, TiCN Coated, Regular Length, 25mm Flute Length, 76mm OAL 25MM LOC,12MM SHANK,76MM OAL 30? helix, right hand spiral, right hand cut, 4 flute square end center cutting single end general purpose carbide end mill with plain cylindrical shank. C-2 grade sub-micron grain carbide with 10% cobalt content. Four flute design offers increased core diameter which minimizes tool deflection & improves accuracy. For profiling, slotting, production milling & finishing applications in a wide range of ferrous metals, including stainless steels & high temp alloys. Made in the USA. GWS/Monster Tool Part #206-001410C

12mm 2 Flute Ball Nose Single End Carbide End Mill, TiN Coated, Regular Length, 25mmFlute, 76MM OAL 25MM LOC,12MM SHANK,76MM OAL 30? helix, right hand spiral, right hand cut, 2 flute ball nose center cutting single end general purpose solid carbide end mill with plain cylindrical shank. Made from C-2 grade sub-micron grain carbide with 10% cobalt content. 2 flute end mills allow for extra chip clearance in heavy cuts with high material removal rates. Applicable for slotting, plunging and profiling in steels, alloys, cast iron, aluminum and non-ferrous materials. Made in the USA. GWS/Monster Tool Part #221-001520A

12mm 2 Flute Square End Single End Carbide End Mill, TiN Coated, Regular Length, 25mmFlute, 76MM OAL 25MM LOC,12MM SHANK,76MM OAL 30? helix, right hand spiral, right hand cut, 2 flute square end center cutting single end general purpose solid carbide end mill with plain cylindrical shank. Made from C-2 grade sub-micron grain carbide with 10% cobalt content. 2 flute end mills allow for extra chip clearance in heavy cuts with high material removal rates. Applicable for slotting, plunging and profiling in steels, alloys, cast iron, aluminum and non-ferrous materials. Made in the USA. GWS/Monster Tool Part #204-001420A

12mm 4 Flute Ball Nose Single End Carbide End Mill, TiN Coated, Regular Length, 25mm Flute Length, 76mm OAL 25MM LOC,12MM SHANK,76MM OAL 30? helix, right hand spiral, right hand cut, 4 flute ball nose center cutting single end general purpose carbide end mill with plain cylindrical shank. C-2 grade sub-micron grain carbide with 10% cobalt content. Four flute design offers increased core diameter which minimizes tool deflection & improves accuracy. For profiling, slotting, production milling & finishing applications in a wide range of ferrous metals, including stainless steels & high temp alloys. Made in the USA. GWS/Monster Tool Part #223-001520A

1mm 4 Flute Ball Nose Single End Carbide End Mill, TiN Coated, Regular Length, 4mm Flute Length, 39mm OAL 4MM LOC,3MM SHANK,39MM OAL 30? helix, right hand spiral, right hand cut, 4 flute ball nose center cutting single end general purpose carbide end mill with plain cylindrical shank. C-2 grade sub-micron grain carbide with 10% cobalt content. Four flute design offers increased core diameter which minimizes tool deflection & improves accuracy. For profiling, slotting, production milling & finishing applications in a wide range of ferrous metals, including stainless steels & high temp alloys. Made in the USA. GWS/Monster Tool Part #223-001400A

2.5mm Diameter Screw Machine Stub Length Carbide Drill, 135? Split Point, Bright Finish, 21mm Flute, 45mm OAL 21mm Flute Length,2.5mm Shank,46mm OAL GWS/Monster stub drills also known as screw machine or shorty drills are made from C-2 Sub-Micron Grain Carbide With 10% Cobalt Content. A relaxed 15? helix is designed for slower feed rates found on the most demanding jobs. 135? split point possesses the strength to pierce the hardest materials. One of the few drill designs capable for use on all six ISO material categories. Optional TiN & AlTiN coating can increase feed rates by 40%. Made in the USA. GWS/Monster Tool Part #460-400984

3.5MM 4XD HP CARB nACRo DRILL 15.6MM LOC,4MM SHK,50MM OAL APERTURE SERIES nACRo COATED MONSTER APERTURE #434-001378B Min 4 times Flute Length to Diameter Radio | With a 4-facet point & radius gash this self-centering drill provides the fastest penetration & ultimate tool longevity | nACRo Coated

3.5mm Diameter Straight Flute Carbide JL Drill, 140? Split Point, AlTiN Coated, 24mm Flute, 49mm Long 24mm Flute Length,3.5mm Shank,49mm OAL GWS/Monster straight flute jobber length drills are made from C-2 Sub-Micron Grain Carbide With 10% Cobalt Content. Straight flute drills offer pinpoint accuracy and reamer quality finishes. The straight flute design combined with a 140? split point eases even the most difficult drilling jobs. Dual purpose: can also be used as a salvage or reclaim tool. For the most demanding applications, straight flute drills perform consistently in the harshest environments. Made in the USA. GWS/Monster Tool Part #470-401378B