Tolerance_held: ['Precision']

Products with this attribute (530 total)

0 Degree Profile Rib Cutter - 4 Flute 0.050'' Tip Diameter 3/16'' Shank ,0.350'' LOC ,3'' OAL w/ 0.010'' Corner Radius 0? Profile Rib Cutter - 4 Flute x 0.050'' Tip x 3/16'' Shank x 0.350'' LOC x 3'' OAL w/ 0.010'' Corner Radius & AlTiN-X Nano Coating Conical Part #SL01.050R

0.1875" (3/16) Cutter DIA x 0.015" (1/64) Radius x 0.200" Length of Cut x 1.500" (1-1/2) Reach Carbide Corner Radius End Mill for Steels and High Temperature Alloys, 2 Flutes

0.2500" (1/4) Cutter DIA x 0.750" (3/4) Length of Cut x 120? included Carbide Drill/End Mill, 4 Flutes, AlTiN Coated

0.5 Degree Carbide Miniature Tapered End Mill - 3 Flute 1/16'' Tip Diameter 0.0756'' Large Diameter ,1/8'' Shank ,3/4'' Length of Cut 0.5? Carbide Miniature TEM - 3 Flute x 1/16'' Tip x 0.0756'' LD x 1/8'' Shank x 3/4'' LOC x 2 1/2'' OAL Conical Part #CM-AX-003

0.5 Degree Carbide Miniature Tapered End Mill - 3 Flute 5/64'' Tip Diameter 0.0869'' Large Diameter ,1/8'' Shank ,1/2'' Length of Cut 0.5? Carbide Miniature TEM - 3 Flute x 5/64'' Tip x 0.0869'' LD x 1/8'' Shank x 1/2'' LOC x 2 1/2'' OAL Conical Part #CM-AX-022

1.20mm Diameter Metric Mini Nano 2 Flute End Mill Coated Nano-Tek Micro-100 Part # MEFM-012-1200K

1.20mm Diameter Metric Mini Nano 2 Flute End Mill Micro-100 Part # MEFM-012-180-20

1.20mm Metric Mini Nano Ball Nose 2 Flute End Mill Coated Nano-Tek .075\

1.5 Degree Profile Rib Cutter - 4 Flute 0.050'' Tip Diameter 3/16'' Shank ,0.350'' LOC ,3'' OAL w/ Ball End 1.5? Profile Rib Cutter - 4 Flute x 0.050'' Tip x 3/16'' Shank x 0.350'' LOC x 3'' OAL w/ Ball End & AlTiN-X Nano Coating Conical Part #AAX01.050B

1.50mm Diameter Metric Mini Nano 2 Flute End Mill Coated Nano-Tek Micro-100 Part # MEFM-015-600K

1.50mm Diameter Metric Mini Nano 2 Flute End Mill Micro-100 Part # MEFM-015-1000-25

1.50mm Metric Mini Nano Ball Nose 2 Flute End Mill Coated Nano-Tek .090\

1/2 X CAT40 V-Flange End Mill Holder With 1.75 Gage Depth

1mm Diameter Mini Nano Ball Nose 2 Flute End Mill Micro-100 Part # BEFM-010-900

2.000 mm Cutter DIA x 6.00 mm Length of Cut Carbide Square End Mill, 3 Flutes, AlTiN Coated

2.50mm Metric Mini Nano Ball Nose 2 Flute End Mill .090\

2.50mm Metric Mini Nano Ball Nose 2 Flute End Mill Coated Nano-Tek .090\

2mm Metric Mini Nano Ball Nose 2 Flute End Mill Coated Nano-Tek .090\

3.000 mm Cutter DIA x 3.00 mm Length of Cut Carbide Ball End Mill for Steels and High Temperature Alloys, 2 Flutes

3/16\

3/32\

490-020B16-08L | CoroMill 490 Long Edge Cutter | SANDVIK | MISUMI

490-032A25-08M | CoroMill 490 Cutter 490-A | SANDVIK | MISUMI

490-063Q22-08H | CoroMill 490 Cutter 490-Q/A490-J | SANDVIK | MISUMI

5.0 Degree Carbide Miniature Tapered End Mill - 3 Flute 1/16'' Tip Diameter 0.1500'' Large Diameter ,1/4'' Shank ,1/2'' Length of Cut 5.0? Carbide Miniature TEM - 3 Flute x 1/16'' Tip x 0.1500'' LD x 1/4'' Shank x 1/2'' LOC x 2 1/2'' OAL w/ Ball End Conical Part #CM-E-002-BE

5.0 Degree Carbide Miniature Tapered End Mill - 3 Flute 1/32'' Tip Diameter 0.1187'' Large Diameter ,3/16'' Shank ,1/2'' Length of Cut 5.0? Carbide Miniature TEM - 3 Flute x 1/32'' Tip x 0.1187'' LD x 3/16'' Shank x 1/2'' LOC x 3'' OAL Conical Part #CM-E-0002

5.000 mm Cutter DIA x 6.00 mm Length of Cut Carbide Ball End Mill for Steels and High Temperature Alloys, 2 Flutes, nACRo? Coated

5.000 mm Cutter DIA x 6.00 mm Length of Cut x 25.00 mm Reach Carbide Ball End Mill for Steels and High Temperature Alloys, 2 Flutes

5.000 mm Cutter DIA x 6.00 mm Length of Cut x 25.00 mm Reach Carbide Square End Mill for Steels and High Temperature Alloys, 2 Flutes

AL-751-70 | ML6 Polyurethane Coated Hubbed Roller- Hardness 70A | MERIDIAN LABORATORY ML6 | MISUMI

ALLIED A 4F .495", .750" AM210 Carbide Threadmill | BlackHawk Industrial Supply

ALLIED A 4F .495", .917" AM210 Carbide Threadmill | BlackHawk Industrial Supply

ALLIED A 4F .495", .917" UNCOATED Carbide Threadmill | BlackHawk Industrial Supply

Allied machine & engineering 24mm 5x gen3sys hld 1″ flg

Allied machine & engineering 32mm 5x gen3sys hld 1-1/2″ flg

Allied Machine and Engineering 22020S-125L - Allied Machine and Engineering 22020S-125L Indexable Spade Drill: 31/32 to 1-3/8" Dia, 3-3/8" Max Depth, Straight Flute -Best Prices Shop National Supply Network!

Allied Machine and Engineering 240Z0S-075F - Allied Machine and Engineering 240Z0S-075F Indexable Spade Drill: 7/16 to 1/2" Dia, 2-3/8" Max Depth, Straight Flute -Best Prices Shop National Supply Network!

Allied Machine and Engineering 25000S-075L

Allied Machine and Engineering 25005H-002I - Allied Machine and Engineering 25005H-002I Indexable Spade Drill: 39/64 to 11/16" Dia, 4-1/2" Max Depth, Helical Flute -Best Prices Shop National Supply Network!

Allied Machine and Engineering 27010S-100L - Allied Machine and Engineering 27010S-100L Indexable Spade Drill: 45/64 to 15/16" Dia, 18" Max Depth, Straight Flute -Best Prices Shop National Supply Network!

Allied Machine and Engineering 60515H-075C - Allied Machine and Engineering 60515H-075C Indexable Spade Drill: 0.5906 to 0.6298" Dia, 3-5/32" Max Depth, Helical Flute -Best Prices Shop National Supply Network!

ALLIED,ALLIED T-A 1 3/4

ALLIED,ALLIED T-A 3 SS EXT SPADE DRILL HOLDER,25030S-125L,KBC Tools & Machinery

Ball End Mill, 1/2 in Milling Dia., Carbide, Bright (Uncoated), Non-Coolant Through

Ball End Mill, 1/32 in Milling Dia., Carbide, AlTiN, Non-Coolant Through

Ball End Mill, 1/4 in Milling Dia., Carbide, nACRo, Non-Coolant Through

Ball End Mill, 3 mm Milling Dia., Carbide, AlTiN, Non-Coolant Through

Ball End Mill, 3/16 in Milling Dia., Carbide, AlTiN, Non-Coolant Through

Ball End Mill, 3/32 in Milling Dia., Carbide, nACRo, Non-Coolant Through

Ball End Mill, 3/4 in Milling Dia., Carbide, AlTiN, Non-Coolant Through

Ball End Mill, 3/4 in Milling Dia., Carbide, Bright (Uncoated), Non-Coolant Through

BLRM-120-4X

BMSM-003-2

Bt 40 x sln 3/4 – 2-1/2

CGC Tools CEM964F4TIALN Primate Square Nose End Mill, TiAlN Coating, 4 Flute, 9/64" Diameter, 1/2" LOC, 2" OAL, 3/16"...

Corner Chamfer End Mill,8.00mm,Carbide

Corner Radius End Mill, 1.00 mm Milling Dia., Carbide, AlTiN, Straight, Metric, 0.10mm, 1.00 mm, 57.00 mm

Corner Radius End Mill, 1/2 in Milling Dia., Carbide, AlTiN, Straight, Fractional Inch, 0.03 in, 1 in, 3 in

Corner Radius End Mill, 1/2 in Milling Dia., Carbide, ZrN, Straight, Fractional Inch, 0.03 in, 1 in, 3 in

Corner Radius End Mill, 3.00 mm Milling Dia., Carbide, Bright (Uncoated), Straight, Metric, 0.25mm, 3.00 mm, 57.00 mm

Corner Radius End Mill, 3/8 in Milling Dia., Carbide, AlTiN, Non-Coolant Through, Straight, Fractional Inch, 0.06 in, 7/8 in, 2 1/2 in

Corner Radius End Mill, 3/8 in Milling Dia., Carbide, AlTiN, Straight, Fractional Inch, 0.03 in, 7/8 in, 2 1/2 in

Corner Radius End Mill, 5/16 in Milling Dia., Carbide, AlTiN, Straight, Fractional Inch, 0.01 in, 13/16 in, 2 1/2 in

Corner Radius End Mill, AX, 100.00mm L

Corner Radius End Mill, AX, 63.50mm L

CoroMill 490 Cutter 490-Q/A490-J | SANDVIK | MISUMI

DM-437-2120X

Drill Mill, Carbide, AlTiN, 12.000 mm Milling Dia., 120 Degrees

Drill Mill, Carbide, Bright (Uncoated), 10.000 mm Milling Dia., 90 Degrees

Drill Mill, Carbide, Bright (Uncoated), 5/16 in Milling Dia., 90 Degrees

Drill Mill, Carbide, Bright (Uncoated), 6.000 mm Milling Dia., 90 Degrees

Drill/End Mill, 2 & 4 Flute, 0.1250" (1/8) Cutter dia, Finish: UN

Drill/End Mill, 2 & 4 Flute, 0.5000" (1/2) Cutter dia, Finish: UN

Drill/End Mill, 2 & 4 Flute,0.2500" (1/4) Cutter dia

Drill/End Mill, 2 & 4 Flute, 0.4375" (7/16) Cutter dia, Length of Cut: 1"

End Mill ALTiN Coated (Metric) - 4 Fl 30 Deg Hard Milling Ball Nose Micro-100 Part #HMBM-060-4X

End Mill ALTiN Coated (Metric) - 4 Fl 30 Deg Hard Milling Ball Nose Micro-100 Part #HMBM-080-4X

End Mill, 2 Flute, Ball, 4.0 mm Cutter dia

End Mill, 2 Flute, Ball,2.500 mm Cutter dia

End Mill, 2 Flute, Ball,3.0 mm Cutter dia

End Mill, 2 Flute, Ball,4.0 mm Cutter dia

End Mill, 2 Flute, Corner Radius,0.600 mm Cutter dia