Unit_count: ['1.0']

Products with this attribute (309675 total)

0.060" Min Bore DIA x 0.150" Max Bore Depth 0.0700" Tooth Width 0.015" (1/64) Projection x 0.1250" (1/8) Shank DIA x 1.50" (1-1/2) Overall Length - Carbide Boring Standard Right Hand, AlTiN Coated

0.060" Min Bore DIA x 0.250" (1/4) Max Bore Depth 0.0240" Tooth Width 0.020" Projection x 0.1250" (1/8) Shank DIA x 1.50" (1-1/2) Overall Length x 0.0010" Radius #48-64 - Carbide UN Thread Right Hand, AlTiN Coated

0.060" Min Bore DIA x 0.300" Max Bore Depth 0.0700" Tooth Width 0.015" (1/64) Projection x 0.1250" (1/8) Shank DIA x 1.50" (1-1/2) Overall Length x 0.0030" Radius - Carbide Boring Standard Left Hand, AlTiN Coated

0.0600" Cutter DIA x 0.005" Radius x 0.090" Length of Cut x 0.500" (1/2) Reach Carbide Corner Radius End Mill for Steels and High Temperature Alloys, 3 Flutes

0.0600" Drill DIA x 0.180" Flute Length Carbide Quick Change - Spot Drill, 2 Flutes

0.0781" (5/64) Cutter DIA x 0.117" Length of Cut x 0.900" Reach Carbide Square End Mill for Steels and High Temperature Alloys, 3 Flutes, nACRo? Coated

0.08 Replacement Point

0.105" Replacement Pin Gage P-1 -0.0002 Tolerance

0.119" Replacement Pin Gage P-1 -0.0002 Tolerance

0.122" Replacement Pin Gage P-1 -0.0002 Tolerance

0.125-5-VF08B TapeCase | Tapes, Adhesives, Materials | DigiKey Marketplace

0.1250" (1/8) Cutter DIA x 0.050" Width x 0.140" (9/64) Neck Length CarbideSquare Keyseat Cutter, 6 Flutes, AlTiN Coated

0.128" Replacement Pin Gage P-1 -0.0002 Tolerance

0.160" Min Bore DIA x 0.500" (1/2) Max Bore Depth 0.1250" (1/8) Tooth Width 0.040" Projection x 0.1875" (3/16) Shank DIA x 2.00" (2) Overall Length x 0.0060" Radius - Carbide Boring Standard Right Hand, AlTiN Coated

0.160" Min Bore DIA x 0.900" Max Bore Depth 0.1250" (1/8) Tooth Width 0.040" Projection x 0.1875" (3/16) Shank DIA x 2.00" (2) Overall Length x 0.0060" Radius - Carbide Boring Standard Left Hand, AlTiN Coated

0.16m, Mini DisplayPort - HDMI, m/f

0.172" Replacement Pin Gage P-1 -0.0002 Tolerance

0.180" Min Bore DIA x 0.350" Max Bore Depth 0.0460" Tooth Width 0.040" Projection x 0.2500" (1/4) Shank DIA x 2.50" (2-1/2) Overall Length x 0.0020" Radius #27-56 - Carbide UN Thread Right Hand, AlTiN Coated

0.180" Min Bore DIA x 0.350" Max Bore Depth 0.1500" Tooth Width 0.045" Projection x 0.2500" (1/4) Shank DIA x 2.50" (2-1/2) Overall Length - Carbide Boring Standard Right Hand, AlTiN Coated

0.180" Min Bore DIA x 0.350" Max Bore Depth 0.1500" Tooth Width 0.045" Projection x 0.2500" (1/4) Shank DIA x 2.50" (2-1/2) Overall Length x 0.0060" Radius - Carbide Boring Standard Left Hand, AlTiN Coated

0.180" Min Bore DIA x 1.000" (1) Max Bore Depth 0.1500" Tooth Width 0.045" Projection x 0.2500" (1/4) Shank DIA x 2.50" (2-1/2) Overall Length x 0.0060" Radius - Carbide Boring Standard Left Hand, AlTiN Coated

0.180" Min Bore DIA x 1.100" Max Bore Depth 0.1500" Tooth Width 0.045" Projection x 0.2500" (1/4) Shank DIA x 2.50" (2-1/2) Overall Length - Carbide Boring Standard Right Hand, AlTiN Coated

0.1800" Min Bore DIA x 0.750" (3/4) Max Bore Depth x 0.0460" Tooth Width x 0.0400" Projection x 0.2500" (1/4) Shank DIA x 2.50" (2-1/2) Overall Length x 0.0020" Radius #24-56 - Carbide UN Thread Left Hand, AlTiN Coated

0.1875" (3/16) Cutter DIA x 0.015" (1/64) Radius x 0.200" Length of Cut x 1.500" (1-1/2) Reach Carbide Corner Radius End Mill for Steels and High Temperature Alloys, 2 Flutes

0.1875" (3/16) Drill DIA x 0.625" (5/8) Flute Length Carbide Quick Change - Spot Drill, 2 Flutes

0.1875" (3/16) Shank DIA x 30? included Carbide Tipped Engraver, n/a Flutes, AlTiN Coated

0.1875" (3/16) Shank DIA x 41? per side Carbide Flat Quick Change - Countersink and Chamfer Tool, 4 Flutes

0.1875" (3/16) Shank DIA x 50? per side Carbide Flat Quick Change - Countersink and Chamfer Tool, 4 Flutes

0.1875" (3/16) Shank DIA x 90? included Carbide Tipped Engraver, n/a Flutes, AlTiN Coated

0.197" Replacement Pin Gage P-1 -0.0002 Tolerance

0.198" Min Bore DIA x 1.250" (1-1/4) Max Bore Depth 0.013" Projection x 0.2500" (1/4) Shank DIA x 2.50" (2-1/2) Overall Length - Carbide Boring Helical Back Rake Right Hand, AlTiN Coated

0.20% (w/v) Aqueous Startch Chemical Indicator Solution, 120 mL, Ricca R7999200-120A New Laboratory Setup Savings - up to 40%, Magnetic Stirrer, Vortex Mixer, Sample Prep, Centrifuge

0.200" Min Bore DIA x 0.700" Max Bore Depth 0.1500" Tooth Width 0.050" Projection x 0.2500" (1/4) Shank DIA x 2.50" (2-1/2) Overall Length x 0.0060" Radius - Carbide Boring Standard Left Hand, AlTiN Coated

0.200" Min Bore DIA x 1.000" (1) Max Bore Depth 0.1500" Tooth Width 0.050" Projection x 0.2500" (1/4) Shank DIA x 2.50" (2-1/2) Overall Length x 0.0060" Radius - Carbide Boring Standard Left Hand, AlTiN Coated

0.200" Min Bore DIA x 1.200" Max Bore Depth 0.1500" Tooth Width 0.050" Projection x 0.2500" (1/4) Shank DIA x 2.50" (2-1/2) Overall Length x 0.0060" Radius - Carbide Boring Standard Right Hand, AlTiN Coated

0.204" Replacement Pin Gage P-1 -0.0002 Tolerance

0.206" Replacement Pin Gage P-1 -0.0002 Tolerance

0.212" Replacement Pin Gage P-1 -0.0002 Tolerance

0.223" Replacement Pin Gage P-1 -0.0002 Tolerance

0.230" Min Bore DIA x 0.800" Max Bore Depth 0.2000" Tooth Width 0.057" Projection x 0.3125" (5/16) Shank DIA x 2.50" (2-1/2) Overall Length x 0.0060" Radius - Carbide Boring Standard Left Hand, AlTiN Coated

0.230" Min Bore DIA x 1.000" (1) Max Bore Depth 0.0640" Tooth Width 0.055" Projection x 0.3125" (5/16) Shank DIA x 2.50" (2-1/2) Overall Length x 0.0020" Radius #20-40 - Carbide UN Thread Left Hand, AlTiN Coated

0.230" Min Bore DIA x 1.250" (1-1/4) Max Bore Depth 0.2000" Tooth Width 0.057" Projection x 0.3125" (5/16) Shank DIA x 2.50" (2-1/2) Overall Length x 0.0060" Radius - Carbide Boring Standard Right Hand, AlTiN Coated

0.231" Replacement Pin Gage P-1 -0.0002 Tolerance

0.240" Replacement Pin Gage P-1 -0.0002 Tolerance