The SMC AS elbow air flow control valve with tamper proof adjusting is made of polybutylene terephthalate (PBT) plastic and nickel-plated brass, and has male National Pipe Taper (NPT) threads with sealant on the inlet port and a push-to-connect tube fitting on the outlet port. The valve body is made of PBT for strength and light weight, and the internal metal parts are made of nickel-plated brass for resistance to corrosion. This valve has NPT threads with polytetrafluoroethylene (PTFE) sealant on the inlet for creating a tighter seal than straight threads, and the push-to-connect fitting on the outlet allows a one-touch connection to nylon, soft nylon, or polyurethane tubing. It is designed to be located downstream of the cylinder for meter-out control. Air flow is set with a special tool (sold separately) to help prevent unwanted adjustments, and there are ten needle rotations for precise manual control of the flow rate. The maximum operating pressure is 145 pounds per square inch (psi), and the ambient and fluid temperature range is 23 to 140 degrees F (-5 to 60 degrees C). Air flow control valves (also called speed controllers) regulate the flow of compressed air into or out of pneumatic cylinders to control the speed of motion of the piston in the cylinder. The valves have an adjustable metering needle and a check valve to control the flow in only one direction. Air entering the valve is blocked by the check valve and forced to pass through the needle valve, and the position of the needle is adjusted to determine the rate of flow. Pneumatic systems with cylinders are used for applications such as truck and train air brakes, air compressors, and tools for mining, manufacturing, and construction. SMC Corporation of America, a U.S. subsidiary of SMC Corporation in Japan, was founded in 1959 in Tokyo. SMC manufactures actuators, valves, airline equipment, connector fittings, electrical products, vacuum products, dryers, temperature control chillers, and a broad range of related accessories. SMC Corporation of America is headquartered in Noblesville, IN, and meets International Organization for Standardization (ISO) 9000:2000 standards.
The SMC AS universal air flow control valve is made of polybutylene terephthalate (PBT) plastic and nickel-plated brass with male National Pipe Taper (NPT) threads on the inlet port and a push-to-connect tube fitting on the outlet port. The valve body is made of PBT for strength and light weight, and the internal metal parts are made of nickel-plated brass for resistance to corrosion. This valve has NPT threads with polytetrafluoroethylene (PTFE) sealant on the inlet for creating a tighter seal than straight threads, and the push-to-connect fitting on the outlet allows a one-touch connection to nylon, soft nylon, or polyurethane tubing. This valve is designed to be located downstream of the cylinder for meter-out control, and the outlet can be swiveled to any angle for flexibility in mounting. The knob provides ten needle rotations for precise manual adjustment of the air flow. The maximum operating pressure is 145 pounds per square inch (psi), and the ambient and fluid temperature range is 23 to 140 degrees F (-5 to 60 degrees C). This air flow control valve has a lock nut to lock the needle setting, and a retainer to help prevent accidental loss of the needle. Air flow control valves (also called speed controllers) regulate the flow of compressed air into or out of pneumatic cylinders to control the speed of motion of the piston in the cylinder. The valves have an adjustable metering needle and a check valve to control the flow in only one direction. Air entering the valve is blocked by the check valve and forced to pass through the needle valve, and the position of the needle is adjusted to determine the rate of flow. Pneumatic systems with cylinders are used for applications such as truck and train air brakes, air compressors, and tools for mining, manufacturing, and construction. SMC Corporation of America, a U.S. subsidiary of SMC Corporation in Japan, was founded in 1959 in Tokyo. SMC manufactures actuators, valves, airline equipment, connector fittings, electrical products, vacuum products, dryers, temperature control chillers, and a broad range of related accessories. SMC Corporation of America is headquartered in Noblesville, IN, and meets International Organization for Standardization (ISO) 9000:2000 standards.
The SMC KA series 90-degree elbow fitting is made of brass and has tube and UNI male connectors. This 90-degree elbow fitting, or "ell," connects two pipes at a 90-degree angle to change the direction of flow between pipes. It is a push-to-connect fitting that connects to pipes or tubing on one end and has a Universal (UNI) male connector on the other. The fitting is made of brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Brass can be connected to copper, brass, plastic, aluminum, and welded steel. The working pressure for this fitting is up to 145 pounds per square inch (psi), and its operating temperature ranges from 0 to 40 degrees C.Pipe fittings are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. Push-to-connect compression fittings do not require tools or sealants, and are useful in installations where a heat source, such as a soldering torch, is prohibited. When purchasing pipe fittings, consider the application, as this will affect material type, shape, size, and required durability. Fittings are available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness).SMC Corporation manufactures actuators, valves, airline equipment, connector fittings, electrical products, vacuum products, dryers, temperature control chillers, and accessories. SMC Corporation of America is headquartered in Noblesville, IN, and meets International Organization for Standardization (ISO) 9000:2000 standards.
The SMC KA series 90-degree elbow fitting is made of brass and has tube and UNI male connectors. This 90-degree elbow fitting, or "ell," connects two pipes at a 90-degree angle to change the direction of flow between pipes. It is a push-to-connect fitting that connects to pipes or tubing on one end and has a Universal (UNI) male connector on the other. The fitting is made of brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Brass can be connected to copper, brass, plastic, aluminum, and welded steel. The working pressure for this fitting is up to 145 pounds per square inch (psi), and its operating temperature ranges from 0 to 40 degrees C.Pipe fittings are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. Push-to-connect compression fittings do not require tools or sealants, and are useful in installations where a heat source, such as a soldering torch, is prohibited. When purchasing pipe fittings, consider the application, as this will affect material type, shape, size, and required durability. Fittings are available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness).SMC Corporation manufactures actuators, valves, airline equipment, connector fittings, electrical products, vacuum products, dryers, temperature control chillers, and accessories. SMC Corporation of America is headquartered in Noblesville, IN, and meets International Organization for Standardization (ISO) 9000:2000 standards.
The SMC KG series 90-degree elbow fitting with sealant is made of stainless steel 303 and has tube and BSPT male connectors. This 90-degree elbow fitting, or "ell," with sealant connects two pipes at a 90-degree angle to change direction of flow between pipes. It is a push-to-connect fitting that connects to pipes or tubing on one end and has a British Standard Pipe Taper (BSPT) male connector on the other. It is made of stainless steel for resistance to scaling and corrosion. The working pressure for this fitting is up to 145 pounds per square inch (psi), and its operating temperature ranges from -5 to 60 degrees C.Pipe fittings are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. Push-to-connect compression fittings do not require tools or sealants, and are useful in installations where a heat source, such as a soldering torch, is prohibited. When purchasing pipe fittings, consider the application, as this will affect material type, shape, size, and required durability. Fittings are available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness).SMC Corporation manufactures actuators, valves, airline equipment, connector fittings, electrical products, vacuum products, dryers, temperature control chillers, and accessories. SMC Corporation of America is headquartered in Noblesville, IN, and meets International Organization for Standardization (ISO) 9000:2000 standards.
The SMC KQ series plug fitting is made of polybutylene terephthalate (PBT) and has a tube connector. This plug fitting inserts into a pipe or fitting to close and terminate its end. It is a push-to-connect fitting that accepts the insertion of nylon, soft nylon and polyurethane tube fittings. This fitting is made of polybutylene terephthalate (PBT), which is a polymer resistant to solvents, shrinkage, heat, and impact. It can be treated to increase resistance to UV and flammability. The working pressure for this fitting is up to 145 pounds per square inch (psi), and its operating temperature ranges from -5 to 60 degrees C.Pipe fittings are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. Push-to-connect compression fittings do not require tools or sealants, and are useful in installations where a heat source, such as a soldering torch, is prohibited. When purchasing pipe fittings, consider the application, as this will affect material type, shape, size, and required durability. Fittings are available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness).SMC Corporation manufactures actuators, valves, airline equipment, connector fittings, electrical products, vacuum products, dryers, temperature control chillers, and accessories. SMC Corporation of America is headquartered in Noblesville, IN, and meets International Organization for Standardization (ISO) 9000:2000 standards.
The SMC KQ2 series plug fitting is made of polybutylene terephthalate (PBT) and has a tube connector. This plug fitting inserts into a pipe or fitting to close and terminate its end. It is a push-to-connect fitting that accepts the insertion of nylon, soft nylon and polyurethane tube fittings. The fitting is made of polybutylene terephthalate (PBT), which is a polymer resistant to solvents, shrinkage, heat, and impact, and it can be treated to increase resistance to UV and flammability. The working pressure for this fitting is up to 145 pounds per square inch (psi), and its operating temperature ranges from -5 to 60 degrees C.Pipe fittings are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. Push-to-connect compression fittings do not require tools or sealants, and are useful in installations where a heat source, such as a soldering torch, is prohibited. When purchasing pipe fittings, consider the application, as this will affect material type, shape, size, and required durability. Fittings are available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness).SMC Corporation manufactures actuators, valves, airline equipment, connector fittings, electrical products, vacuum products, dryers, temperature control chillers, and accessories. SMC Corporation of America is headquartered in Noblesville, IN, and meets International Organization for Standardization (ISO) 9000:2000 standards.
The SMC KQ2 series reducer nipple fitting is made of polybutylene terephthalate (PBT) and has tube connectors. This reducer nipple fitting is for connecting pipes or fittings with different diameters. It is a push-to-connect fitting that accepts the insertion of nylon, soft nylon and polyurethane tube fittings. The fitting is made of polybutylene terephthalate (PBT), which is a polymer resistant to solvents, shrinkage, heat, and impact, and it can be treated to increase resistance to UV and flammability. The working pressure for this fitting is up to 145 pounds per square inch (psi), and its operating temperature ranges from -5 to 60 degrees C.Pipe fittings are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. Push-to-connect compression fittings do not require tools or sealants, and are useful in installations where a heat source, such as a soldering torch, is prohibited. When purchasing pipe fittings, consider the application, as this will affect material type, shape, size, and required durability. Fittings are available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness).SMC Corporation manufactures actuators, valves, airline equipment, connector fittings, electrical products, vacuum products, dryers, temperature control chillers, and accessories. SMC Corporation of America is headquartered in Noblesville, IN, and meets International Organization for Standardization (ISO) 9000:2000 standards.
This SMC KQ2VS male universal elbow is a PBT and brass tube fitting for connecting a female thread to a tube running in any direction at a 90-degree angle. It has male National Pipe Thread Taper (NPT) threads with fluororesin sealant on one end and a push-to-connect metric tube connection on the other end. The branch end can rotate freely in any direction. The body is made of polybutylene terephthalate (PBT) and Japanese Industrial Standard (JIS) C3604 brass for corrosion resistance, the threads are made of C3604 brass, and the tube seal is made of nitrile butadiene rubber (NBR) for resistance to oils and extreme temperatures. An internal hexagonal socket head allows tightening with a hexagonal wrench in confined spaces. A chuck and collet provide secure retention of tubing, and the release button allows tubing to be removed with little force. The fitting can be used with nylon, soft nylon, polyurethane, fluorinated ethylene propylene (FEP), and perfluoroalkoxy (PFA) tubing. It has an operating pressure range of -14.5 to 145 pounds per square inch (psi) (-100 kPa to 1 MPa), an ambient temperature range of 23 to 140 degrees F (-5 to 60 degrees C), and a fluid temperature range of 32 to 104 degrees F (0 to 40 degrees C). This PBT and brass tube fitting is Restriction of Hazardous Substances (RoHS) compliant, and can be used in a broad range of fluid power applications, including temperature control, compressed air equipment, medical instrumentation, and motor vehicle controls, among others.Specifications Connection thread Male NPT Thread material JIS C3604 brass Compatible tubing materials Nylon, soft nylon, polyurethane, FEP, PFA Fluid Air or water Operating pressure range 14.5 to 145 psi (-100 kPa to 1 MPa) Operating temperature range (ambient) 23 to 140 degrees F (-5 to 60 degrees C) Operating temperature range (fluid)) 32 to 104 degrees F (0 to 40 degrees C)Tube fittings are components used for connecting, branching, terminating, and changing the direction of tubing in pneumatic and hydraulic systems. They are made of brass, stainless steel, polybutylene terephthalate (PBT), and other materials that resist corrosion and wear. Tube fittings have various types of connections, including threaded, welded, barbed, and push-to-connect (also called one-touch). Push-to-connect connections do not require tools or sealants. Tube fittings are used in various applications, including machine tools, airplane and truck controls, and automated production lines, among others.SMC Corporation manufactures actuators, valves, airline equipment, connector fittings, electrical products, vacuum products, dryers, temperature control chillers, and accessories. SMC Corporation of America is headquartered in Noblesville, IN, and meets International Organization for Standardization (ISO) standard 9001:2008.
This SMC KQ2VS male universal elbow is a PBT and brass tube fitting for connecting a female thread to a tube running in any direction at a 90-degree angle. It has male National Pipe Thread Taper (NPT) threads with fluororesin sealant on one end and a push-to-connect metric tube connection on the other end. The branch end can rotate freely in any direction. The body is made of polybutylene terephthalate (PBT) and Japanese Industrial Standard (JIS) C3604 brass for corrosion resistance, the threads are made of C3604 brass, and the tube seal is made of nitrile butadiene rubber (NBR) for resistance to oils and extreme temperatures. An internal hexagonal socket head allows tightening with a hexagonal wrench in confined spaces. A chuck and collet provide secure retention of tubing, and the release button allows tubing to be removed with little force. The fitting can be used with nylon, soft nylon, polyurethane, fluorinated ethylene propylene (FEP), and perfluoroalkoxy (PFA) tubing. It has an operating pressure range of -14.5 to 145 pounds per square inch (psi) (-100 kPa to 1 MPa), an ambient temperature range of 23 to 140 degrees F (-5 to 60 degrees C), and a fluid temperature range of 32 to 104 degrees F (0 to 40 degrees C). This PBT and brass tube fitting is Restriction of Hazardous Substances (RoHS) compliant, and can be used in a broad range of fluid power applications, including temperature control, compressed air equipment, medical instrumentation, and motor vehicle controls, among others.Specifications Connection thread Male NPT Thread material JIS C3604 brass Compatible tubing materials Nylon, soft nylon, polyurethane, FEP, PFA Fluid Air or water Operating pressure range 14.5 to 145 psi (-100 kPa to 1 MPa) Operating temperature range (ambient) 23 to 140 degrees F (-5 to 60 degrees C) Operating temperature range (fluid)) 32 to 104 degrees F (0 to 40 degrees C)Tube fittings are components used for connecting, branching, terminating, and changing the direction of tubing in pneumatic and hydraulic systems. They are made of brass, stainless steel, polybutylene terephthalate (PBT), and other materials that resist corrosion and wear. Tube fittings have various types of connections, including threaded, welded, barbed, and push-to-connect (also called one-touch). Push-to-connect connections do not require tools or sealants. Tube fittings are used in various applications, including machine tools, airplane and truck controls, and automated production lines, among others.SMC Corporation manufactures actuators, valves, airline equipment, connector fittings, electrical products, vacuum products, dryers, temperature control chillers, and accessories. SMC Corporation of America is headquartered in Noblesville, IN, and meets International Organization for Standardization (ISO) standard 9001:2008.