The DXE-CAT-RX3, DXE-CAT-RX3-A, DXE-CAT-RX3C & DXE-CAT-RX3C-A are a part of the growing Digital Xtreme Series. This product is different than the typical CAT extender found on the market today as it not only breaks the price barrier but the feature and usability aspects as well. Rear mounted connectors provide for a clean professional installation. The DXE-CAT-RX3 Series is designed to complement the Digital Xtreme Series of HDBaseT transmitters such as the DXW-2 Series HDBaseT wall plates, DXE-CAT-TX1, DXE-CAT-TX2, DXM Matrixes, etc. The built in relays are perfect for screen control and the audio amplifier versions (2x35 Watt) will fill the room with sound when used with the Aurora SKR-22T 360° sound field ceiling tile speaker. A low cost, highly integrated solution for rolling carts, podiums, and credenzas is possible with the DXE-CAT family. Going the distance: HDBaseT technology, with a single CAT cable, allows the DXE-CAT to operate up to 330ft 1080p 60Hz 48bit color depth, 500ft 1080p 60Hz 24bit (CAT 6), or 600ft 1080p 60Hz 24bit (CAT 6A Shielded) depending on transmitter model. In addition, the RS-232, IR, & LAN can be sent over the same cable bi-directionally.</p>
The IPX-TC2-F provides one of the most advanced IP Streaming solutions on the market utilizing Aurora's IPBaseT technology, which synergizes various IP/AV standards to work together as one. IPX-TC2-F supports windowing/multiviewer (up to 16), scaling and 16x15 videowall along with HDMI 2.0 4K60 4:4:4. It is the industry's first 4K2K transceiver with zero compression and latency based on BlueRiver NT platform. Using a transmitter (encoder) and receiver (decoder), respectively, used to be the standard - until now. The IPX-TC2-F can be set up as either one to make installation, inventory, and troubleshooting easier. Another industry first is the option slot to add other IP capabilities, like ExtremeUSB (USB 2.0 over IP) or Dante audio, for a more complete, distributed system.</p><p>Audio, video, data, and control can be sent securely to one or many units using off-the-shelf 10G Ethernet switches. When the IPX-TC2-F is set up to be a transmitter, the 2 HDMI inputs become a source switch and the HDMI output becomes a potential loop out. When set up as a receiver, a user can select the local HDMI inputs or an IP source. Seamless switching of the sources further enhances the presentation. Regardless of how the IPX-TC2-F is set up, the audio can be de-embedded at any location, break away, and/or be sent to or received from a Dante enabled device. The USB 2.0 option is also flexible, working as a KVM and/or a high-speed data transfer (480Mbps) for memory sticks. Each IPX-TC2-F USB feature can also be set as a host or a device. To keep the system friendly, a customizable OSD and web server are available to be programmed as required. For RJ-45 LAN devices, the 1G Ethernet port allows full bandwidth end-to-end over the IPX-TC2-F 10G fiber or copper port.</p><p><strong>Please Note!</strong> - Power supply and SFP module not included.</p>
The VLX-TCW2 Series provides one of the most advanced IP Streaming solutions on the market utilizing Aurora's IPBaseT technology, which synergizes various IP/AV standards to work together as one. It is the industry's first 4K UHD transceiver with only 1.5 Frame (25ms) latency and visually losses compression. Using a transmitter (encoder) and receiver (decoder), respectively, used to be the standard - until now. The VLX-TCW2 Series can be set up as either one to make installation, inventory, and troubleshooting easier.</p><p>Another industry first is the option slot to add other IP capabilities, like Dante audio, for a more complete, distributed system.<br /></p><p>Audio, video, data, and control can be sent securely to one or many units using off-the-shelf 1G RJ-45 Ethernet switch. When the VLX-TCW2 is set up to be a transmitter, the VGA/HDMI (VLX-TCW2V) or 2 HDMI (VLX-TCW2H) inputs become a source switch and the HDMI output becomes a potential loop out. When set up as a receiver, a user can select the local HDMI inputs or an IP source. Seamless switching of the sources further enhances the presentation. Regardless of how the VLX-TCW2 is set up, the audio can be de-embedded at any location, break away, and/or be sent to or received from a Dante enabled device. The USB is also flexible, working as a KVM and/or a high-speed data transfer (480Mbps) for memory sticks. Each VLX-TCW2 USB feature can also be set as a host or a device. To keep the system friendly, an OSD and integrated web server are available for easy navigation and setup of features.</p>