Brand: Burndy Products

All products from this brand (18 total)

BLACK UNITAP UV Rated plastisol covered AL6061-T6 aluminum body saves time by eliminating the need for taping. Oxide inhibitor pre-installed inhibits moisture and contaminants from entering the contact area. Range-taking capability reduces the number of connectors carried in inventory. UL486B Listed, AL9CU, 600V 90 degrees C.

Burndy Hytap connector. Irreversible compression ground tap figure "C" connectors. Accommodates all cable combinations from #6 solid through 500 kcmil. "C"- shaped opening permits placing two continuous parallel cables into conductor groove. UL 467 listed. Acceptable for direct burial in earth or concrete. Prefilled with Penetrox compound and strip sealed. UL listed. CSA certified. IEEE - 837. Direct burial. Width: 0.75 inches.

Burndy remote power operated, hydraulic cable cutter. It incorporates a specialized latch style cutting head that allows interference-free closure for mid-span cuts. The RHCC129ACSR with its precision cutting blades is capable of cutting up to 1.29-inches diameter bare or insulated copper and aluminum cable, 1113 ACSR, 5/8-inches ground rod, 1/2-inches rebar, 5/8-inches diameter soft steel bolts, 1/2-inches standard guy strand, and up to 3/8-inches EHS guy strand. The RHCC129ACSR is provided with a 5-year limited warranty (excluding blades). Specialized latch head design. Interference free closure for mid-span cuts. Precision cutting blades. For clean cuts on copper/aluminum, ACSR, ground rods, rebar, guy strand, and soft steel bolts. High strength steel cylinder. For durability and long life. Lightweight ergonomic design allows one hand operation. User has one hand free to manipulate material to be cut. Durable canvas carrying bag. Provides tool protection and stores all accessories. Operating pressure: 10000 PSI. Measures 3.7-inches width by 11.25-inches length.

BURNDY Universal Terminal Lug, Dual Rated, Series: KA-U, Stranded Aluminum/Copper Conductor, 6 AWG Stranded to 350 Kcmil Conductor, 3/8 in Stud, 1 Bolt Hole, 1.03 in L x 0.25 in T Tongue, Straight Tongue, 1.25 in H x 1.13 in W Collar, Allen Screw Set , 375 in-lb installation torque, Aluminum, Electro Tin Plated, 2.25 in L x 1.13 in W

Flexible copper braid jumpers designed to take up linear expansion and contraction, compensate for misalignment and absorb vibratory movement of electrical equipment and devices. Made of flat extra flexible, tinned, pure copper braid, with unplated, seamless, pure copper ferrules formed into a rectangular shape on each end. UL Listed, CSA Certified.

Insulink service entrance sleeve for insulated combinations of copper, aluminum, ACSR compressed. Pre-insulated service entrance compression connector installed with OH25, OUR840 and MD6 Hytool as well as Y35 and Y750 Hypress tools. Polyethylene caps prevent dirt from accumulating in barrel, grip cable for easy two-hand installation, and seal out moisture. Aluminum connector is anchored to jacket, assuring the connector is under the die when crimping. Nylon jacket insulates connector electrically and protects against water and weather. Superior color coding. Pre-filled with Penetrox joint compound. Do not use insulated sealed connectors on bare conductors. Refer to Linkit type connectors.

One hole hylug code conductor long barrel uninsulated copper compression terminal with inspection window. UL Listed 90 degrees C, 600 Volts to 35 kV. 45 Degrees and 90 degrees angles are available. Conductor: #14 - 10 Str, #12 - 10 Sol, 6 sq mm. The MM2 conductor sizes listed are the recommendations for Class 2 conductor.

One hole hylug code conductor standard barrel copper compression terminal. UL Listed 90 degrees C, 600 Volts to 35 kV. 45 Degrees and 90 degrees angles are available. Conductor: #6 AWG.

Stainless Steel W Die, Index 247, Used in MD6 Hytool.

Stainless Steel W Die, Purple, Index 15, Pin dia: 0.6250.

The RCC series cable cutters are precision high quality tools designed to cut up to 954 ACSR and 1000 kcmil copper and aluminum. The tools are equipped with rugged steel blades, and a precision bi-directional ratchet mechanism for positive blade control, including where applicable, a fast action thumb slide collar for rapid blade advance and rugged fiberglass or non-slip grip handles. The RCC series cable cutters are warranted to be free from defects in material (excluding blades) and workmanship for one year.

Type YA-L-2TC-FX Two Hole Hylug flex conductor standard barrel. Copper compression terminal. 90 degrees C, 600 Volts to 35 kV. UL listed and CSA certified. 1-7/16-inches Wire strip length. Stud hole size: 3/8-inches.

Type YS-A is a high-conductivity aluminum tin-plated compression butt splice for use on all combinations of aluminum to aluminum, aluminum to copper, and copper to copper conductor combinations. They are designed to accommodate conductors from #12 str. through 1000 kcmil in standard and heavy duty applications. Prefilled with Penetrox oxide inhibiting compounds and assembled with color coded end caps, the connectors provide a permanent trouble-free electrical splice with flexibility and low installed cost. Provides stop for proper conductor insertion and an aid in forcing the Penetrox between the individual wire strands. Color-coded end caps. Provides easy wire size and die code identification plus prevents foreign materials from entering and contaminating the connector prior to usage. Connector is clearly marked with wire size, die index and the proper number and location of crimps. Provides easy identification and tooling recommendation. Proper compression forms a homogeneous mass resulting in an excellent electrical connection. 5/8-inches wire strip length.