Brand: Dwyer Products

All products from this brand (20 total)

Humidity/Temp Transducer Temp Range -20 to 140 Degrees F Relative Humidity Range 0 to 100 Percent Power Required 15 to 35VDC 15 to 29VAC Response Time 15 sec. Mounting Wall Output 4 to 20mA Temp Accuracy +/-0.9 Degrees F @ 72 Degrees F Humidity Accuracy +/-2 Percent Display LCD Sensor Type RTD or Thermistor Electrical Connections Terminal Board Standards CE Calibration Certificate NIST Includes Instructions Manufacturers Warranty Length 1 yr.

Humidity/Temp Transducer Temp Range -40 to 140 Degrees F Process Connection 1/2 in NPS Relative Humidity Range 0 to 100 Percent Power Required 15 to 35VDC 15 to 29VAC Response Time 15 sec. Mounting Duct Output 0 to 10VDC Temp Accuracy +/-0.54 Degrees F @ 32 Degrees F Humidity Accuracy +/-2 Percent Probe Length 9 In. Probe Dia 27/50 In. Sensor Type RTD or Thermistor Electrical Connections Terminal Board Enclosure Rating NEMA 4X Standards CE Calibration Certificate NIST

Humidity/Temp Transducer Temp Range -40 to 140 Degrees F Relative Humidity Range 0 to 100 Percent Power Required 15 to 35VDC 15 to 29VAC Response Time 15 sec. Mounting Wall Output 0 to 10VDC Temp Accuracy +/-0.54 Degrees F @ 32 Degrees F Humidity Accuracy +/-2 Percent Display LCD Sensor Type RTD or Thermistor Electrical Connections Terminal Board Standards CE Calibration Certificate NIST Includes Instructions Manufacturers Warranty Length 1 yr.

Select the Magnehelic gage for high accuracy--guaranteed within 2% of full scale--and for the wide choice of 81 models available to suit your needs precisely. Using Dwyer's simple, frictionless Magnehelic gage movement, it quickly indicates low air or non-corrosive gas pressures--either positive, negative (vacuum) or differential. The design resists shock, vibration and over-pressures. No manometer fluid to evaporate, freeze or cause toxic or leveling problems. It's inexpensive, too.

The Series BTM3 Bimetal Thermometer with Maximum/Minimum Temperature Pointer accurately measures the current temperature along with a maximum read or minimum read temperatures. Series BTM3 thermometers are conveniently available in multiple temperature ranges and stem lengths ranging from 2-1/2 to 12 inches. These heavy duty back-connected thermometers are ideal vor any industrial applications such as boilers, ovens, or refrigerated cabinets.

The Series DPGA is the only economic digital pressure gage with selectable engineering units on the market. With its 1% accuracy and digital push-button zero, the DPGA is the perfect choice for digitally monitoring the pressures of air and compatible gases.

The Series DPGAB pressure gages offer 0.5% full scale accuracy in a rugged, easy-to-use unit at prices comparable to mechanical gages. The stainless steel wetted material makes it suitable for a wide variety of liquids or gases. The gages feature user-selectable units of measure allowing one gage to be used for a variety of pressure scales. The DPGAB come with a protective rubber boot to protect against short drops and rough handling.

The Series RHP-W Wall Mount Humidity/Temperature/Dew Point Transmitter is the most versatile room transmitter on the market. The stylish housing is well vented to provide air flow across the sensor to improve measurement accuracy. An optional LCD display can be integral to the transmitter or a remote display can be ordered for building balancing or LEED validation. The LCD display indicates the ambient temperature along with the humidity or dew point. The transmitter has internal dip switches to select the temperature engineering units and whether the transmitter outputs humidity or dew point. (Picture shows standard range).

The Series RHP-W Wall Mount Humidity/Temperature/Dew Point Transmitter is the most versatile room transmitter on the market. The stylish housing is well vented to provide air flow across the sensor to improve measurement accuracy. An optional LCD display can be integral to the transmitter or a remote display can be ordered for building balancing or LEED validation. The LCD display indicates the ambient temperature along with the humidity or dew point. The transmitter has internal dip switches to select the temperature engineering units and whether the transmitter outputs humidity or dew point. (Picture shows standard range).

With the arrival of the DM2000, customers will have a low cost choice for a differential pressure transmitter with an integral digital display. The DM2000 is a digital version of the industry standard magnehelic differential pressure gauge. The unit will fit in the existing hold of a magnehelic and offer a current output as a standard as well as a digital display. Applications building automation systems pharmaceutial/clean room semiconductor fume hoods dust Collection filter monitoring, bubblers fans/blowers air velocity