Brand: HHIP Products

All products from this brand (24 total)

Abbreviate Message Split</p>");

Broaches And Bushings Have Letter Designations That Signify The Body Width Of The Keyway Broach And The Guide Slot In The Bushing.

Carbide inserts and Allen wrench included. Multi-purpose Indexable tools Complete with fitted case.

DNMG-433-DR 55 DIAMOND(0 RAKE) Carbide Insert ~ DR - Single-side chipbreaker with M-class tolerance has high security on the cutting edge for higher removal rates and low cutting force at large cutting depth and high feed rates. ~ for light roughing of steel and stainless steel. ~ XAB748: Comprising of thick TiCN and thick Al2O3 coatings, the grade has high capability against plastic deformation and good hardness of cutting edge. ~ It is the preferred grade for machining of steel from finishing to roughing. ~ Under the same cutting conditions, the cutting speed can be increased by more than 25%, while the tool life can be 30% longer under the same cutting speed. ~ ISO Insert No. DNMG150412DR ~ I.C. is 1/2" ~ L is 39/64" ~ S is 3/16" ~ d is 13/64" ~ r .0472".

HHIP 3 lbs fiberglass handle Brass hammer. It features industrial grade and non-marring, non-sparking. Polished high purity Brass heads. Head diameter is 1-5/8". overall Length is 15".

HHIP 40X Shop Microscope. Wide field eyepiece with direct reading reticle - no calibration required. Eyepiece turns to permit sharp focus of reticle scale. Penlight illuminator in a swivel mount. Requires 2 AAA batteries which are not included. Jack and pinion focusing with dual focusing knobs. Cast aluminum structure. Height is 9". Reticle is 0-18mm/.02mm X 90.

HHIP 8 inch horizontal/vertical rotary table dividing plates are interchangeable with phase II. T-slots are machined within acceptable tolerances. Worm gear is is easily disengaged for free rotation. Long life and continued accuracy is assured by a convenient adjustment to compensate for wear. All rotary table parts are strategically positioned for easy access. The one piece worm and shaft are hobbed from a solid alloy steel. Extra deep coolant channel. 10 second Vernier reading. Dual positive action locks. Graduated 360 degree. Gear drive is immersed in oil. 90: 1 gear ratio. 3 mt center hole with 4 T-slots. Vertical center height is 5.98". T-slot width is 0.465". the engraved graduations are both crisp and clear to eliminate erroneous readings. High precision bearing surfaces insure ultra-smooth rotation. Superior grade Meehanite castings provide the ultimate rigidity. All rotary tables are precision ground to meet the most extracting requirements and are individually supplied with a certificate of inspection.

HHIP combination wrench is made of forged steel. Polished head and raised panel. Open end and 15 degree offset box opening. Size is 26mm.

HHIP convex cutter is made of high speed steel and it used for milling female half circle. Precision ground. Performance at lower cost. Better finish possible in many materials with profile ground. Number of teeth is 6. 1-1/4" Cutter Diameter. 1/8" Radius. 3/4" Shank Diameter. 3-1/2" Overall length. High speed steel used for general purpose matching of both ferrous and nonferrous materials.

HHIP External threading and grooving insert is made from carbide. Right hand orientation. 60 degree V threading. I.C. is 0.375". Hole diameter is 0.173". Grade is XAF799. Insert no. is RT16.001 N-27NPT.

HHIP thread ring gage is made in "x" tolerance. Classes 2a most commonly used for general applications including bolts, nuts, screws and similar fasteners.

Horizontal U-Bar Flanged Base Toggle Clamp ~ 500 lbs. holding pressure. ~ Style # 225D ~ Hand moves 65?. ~ Bar moves 90?. ~ All parts die stamped from solid steel. ~ Plastic hand grip for safety & convenience. ~ Double plated to avoid rust. ~ Carbon steel rivet for durability.

IP54 +/-180 Degree Digital Angle Gage ~ Coolant splash-proof. ~ Dust-proof and chip-proof. ~ Auto off. ~ Compact and lightweight. ~ Base has a disk magnet.

Replace missing, damaged or worn-out Class ZZ gages from existing sets and libraries. ~ Each pin is individually marked with the size. ~ Fully hardened to 60-62 RC. ~ Finish to 10 Micron or better. ~ Overall length is 2". ~ Tolerance is - .0002".

SRGCR 20-3D Turning Tool Holder ~ 0 degree lead angle. ~ 7? relief. ~ Shank is 1-1/4". ~ Overall length is 6". ~ Offset is 1-1/2". ~ Screw is M4 X 10 #2100-0074. ~ Takes 1 RCMT 10T3 insert.

Supplied in a plastic, sturdy, dust-proof case. ~ Sizes are marked on the case for easy Identification. ~ Fully hardened to 60-62 RC. ~ Finish to 10 Micron or better. ~ Class ZZ ~ Overall length is 2". ~ Set is -0.0002" + 0.0000".

Uses WNMG, WNMA Inserts.