Brand: Larson Electronics Products

All products from this brand (9 total)

Explosion Proof Class I, Div. II LED Fixture - 4ft. - 2, T-Style LED Lamps - 220Volts, 50/60Hz(-4100K-Pendant). Made in the USA The Larson Electronics HAL-48-2L-LED-220V Hazardous Area LED Light Fixture is U.S./Canada U.L. approved Class 1 Division 2 Groups A, B, C and D - UL 1598A listed, has a T4A temperature rating and ideal for wet/marine and open air hazardous locations where flammable chemical/petrochemical vapors may be occasionally encountered. This high voltage 220V version of our HAL-48-2L-LED fixture is a 4 foot long, 2 lamp, UL listed Class 1 Division 2 Groups A, B, C and D hazardous area LED light that takes the reliability and efficiency of a fluorescent fixture and adds even longer lamp life and efficiency with high output LEDs. This fixture is T4A temperature rated and comes standard with our high power 24 watt LED lamps. The lamps are protected by an aluminum framed hinged glass door secured with four turn latches and the fixture is constructed of copper free aluminum alloy. The lamp reflector is corrosion resistant heavy gauge aluminum and coated with a high gloss reflective finish. This fixture is configured to run on 220VAC, 50/60 Hz and is U.L. 595 and UL 1598A Marine Type approved for use in marine environments. The HAL-48-2L-LED-220V is weatherproof and provides operators in hazardous locations with a highly efficient, reliable and affordable lighting solution for open areas where flammable chemicals and vapors my occasionally be present. We have eliminated the ballast normally associated with fluorescent fixtures which reduces overall weight, increases lamp life to an extreme 50,000 hours and helps this LED fixture maintain a T4A temperature rating. The solid state design of the included LED lamps give this fixture superior resistance to damage from vibrations and extremes in temperature as well as a lamp service life over twice that of standard T8-bulbs.
Explosion proof LED tank light - 13, 000 lumens LED - wheelbarrow cart - 50' cord - class 1 div 1(-5-20-125 degree). the epl-16c-1mled-50 explosion proof portable tank light from larson electronics is rated class 1 division 1-2 groups candid and class ii division 1-2 and uses leds to produce 13, 000 lumens of light while drawing only 150 watts. Please note: any free shipping offers do not apply to this light cart the epl-16c-1mled-50 is a cart mounted explosion proof LED light that provides 9, 500 square feet of work area coverage with 13, 000 lumens of light output. This portable LED cart light has a removable light head measuring 16 inches in diameter which allows the unit to fit through the standard sized manholes or entry passages commonly found in the petrochemical and marine industries. Often simply referred to as a "tank light", this unit is considered universal due to its ability to be passed through any conventional manhole such as those found in petrochemical containers and ship storage tanks. This portable LED tank light is comprised of an adjustable LED light head mounted atop a wheelbarrow style cart fabricated from non-sparking powder coated ALUMINUM and includes solid wheels allow the operator to tilt the unit up and simply roll the entire assembly to a new LOCATION. The LED light head Produces a brilliant flood pattern of light that is ideal for illuminating enclosed areas and further adds to this units desirability as a portable tank lighting solution. The LED light Fixture assembly can be removed by releasing the hand knob and sliding the light and mounting bracket off of the center support, aiding in deployment, storage and transport. The lamp can be easily adjusted vertically and rotated horizontally, then locked into position. This portable LED light cart is comprised of a removable 16 inch LED light head mounted atop a solid rubber wheeled cart fabricated from non sparking ALUMINUM.
HAL-36-25W-LED-1227-SP
HALS-EMG-48-2L-T8-SFC
Made in the USA The Larson Electronics HAL-48-2L-LED-25C Hazardous Area LED Light Fixture is U.S./Canada U.L. approved Class 1 Division 2 Groups A B C and D - UL 1598A listed has a T4A temperature rating and ideal for hazardous locations where flammable chemical/petrochemical vapors may be occasionally encountered. The HAL-48-2L-LED-25C fixture is a 4 foot long 2 lamp UL listed Class 1 Division 2 Groups A B C and D hazardous area LED light that takes the reliability and efficiency of a fluorescent fixture and adds even longer lamp life and efficiency with high output LEDs. This fixture is T4A temperature rated and comes standard with our high power 24 watt LED lamps. The lamps are protected by an aluminum framed shatter and heat resistant clear acrylic lens secured with ten draw latches and the fixture is constructed of copper free aluminum alloy. The lamp reflector is corrosion resistant heavy gauge aluminum and coated with a high gloss reflective finish. This fixture can be configured to run on 120 to 277VAC as well as 12-24VDC and is U.L. 595 and UL 1598A Marine Type approved for use marine environments. The HAL-48-2L-LED-25C is weatherproof and provides operators in hazardous locations with a highly efficient reliable and affordable lighting solution for open areas where flammable chemicals and vapors may occasionally be present. We have eliminated the ballast normally associated with fluorescent fixtures which reduces overall weight increases lamp life to an extreme 50 000 hours and helps this LED fixture maintain a T4A temperature rating. The solid state design of the included LED lamps give this fixture superior resistance to damage from vibrations and extremes in temperature as well as a lamp service life over twice that of standard T8-bulbs. The 24 watt LED lamps produce more illumination than standard T8 bulbs. The current generation of Larson Electronics LED T-series style bulbs produce 15% more
Made in the USA The Larson Electronics HAL-48-2L-LED-50C Hazardous Area LED Light Fixture is U.S./Canada U.L. approved Class 1 Division 2 Groups A B C and D - UL 1598A listed has a T4A temperature rating and ideal for hazardous locations where flammable chemical/petrochemical vapors may be occasionally encountered. The HAL-48-2L-LED-50C fixture is a 4 foot long 2 lamp UL listed Class 1 Division 2 Groups A B C and D hazardous area LED light that takes the reliability and efficiency of a fluorescent fixture and adds even longer lamp life and efficiency with high output LEDs. This fixture is T4A temperature rated and comes standard with our high power 24 watt LED lamps. The lamps are protected by an aluminum framed shatter and heat resistant clear acrylic lens secured with ten draw latches and the fixture is constructed of copper free aluminum alloy. The lamp reflector is corrosion resistant heavy gauge aluminum and coated with a high gloss reflective finish. This fixture can be configured to run on 120 to 277VAC as well as 12-24VDC and is U.L. 595 and UL 1598A Marine Type approved for use marine environments. The HAL-48-2L-LED-50C is weatherproof and provides operators in hazardous locations with a highly efficient reliable and affordable lighting solution for open areas where flammable chemicals and vapors may occasionally be present. We have eliminated the ballast normally associated with fluorescent fixtures which reduces overall weight increases lamp life to an extreme 50 000 hours and helps this LED fixture maintain a T4A temperature rating. The solid state design of the included LED lamps give this fixture superior resistance to damage from vibrations and extremes in temperature as well as a lamp service life over twice that of standard T8-bulbs. The 24 watt LED lamps produce more illumination than standard T8 bulbs. The current generation of Larson Electronics LED T-series style bulbs produce 15% more
Made in the USA The Larson Electronics HAL-48-2L-LED-50C Hazardous Area LED Light Fixture is U.S./Canada U.L. approved Class 1 Division 2 Groups A B C and D - UL 1598A listed has a T4A temperature rating and ideal for hazardous locations where flammable chemical/petrochemical vapors may be occasionally encountered. The HAL-48-2L-LED-50C fixture is a 4 foot long 2 lamp UL listed Class 1 Division 2 Groups A B C and D hazardous area LED light that takes the reliability and efficiency of a fluorescent fixture and adds even longer lamp life and efficiency with high output LEDs. This fixture is T4A temperature rated and comes standard with our high power 24 watt LED lamps. The lamps are protected by an aluminum framed shatter and heat resistant clear acrylic lens secured with ten draw latches and the fixture is constructed of copper free aluminum alloy. The lamp reflector is corrosion resistant heavy gauge aluminum and coated with a high gloss reflective finish. This fixture can be configured to run on 120 to 277VAC as well as 12-24VDC and is U.L. 595 and UL 1598A Marine Type approved for use marine environments. The HAL-48-2L-LED-50C is weatherproof and provides operators in hazardous locations with a highly efficient reliable and affordable lighting solution for open areas where flammable chemicals and vapors may occasionally be present. We have eliminated the ballast normally associated with fluorescent fixtures which reduces overall weight increases lamp life to an extreme 50 000 hours and helps this LED fixture maintain a T4A temperature rating. The solid state design of the included LED lamps give this fixture superior resistance to damage from vibrations and extremes in temperature as well as a lamp service life over twice that of standard T8-bulbs. The 24 watt LED lamps produce more illumination than standard T8 bulbs. The current generation of Larson Electronics LED T-series style bulbs produce 15% more
Made in the USA The Larson Electronics HAL-48-2L-LED-50C Hazardous Area LED Light Fixture is U.S./Canada U.L. approved Class 1 Division 2 Groups A B C and D - UL 1598A listed has a T4A temperature rating and ideal for hazardous locations where flammable chemical/petrochemical vapors may be occasionally encountered. The HAL-48-2L-LED-50C fixture is a 4 foot long 2 lamp UL listed Class 1 Division 2 Groups A B C and D hazardous area LED light that takes the reliability and efficiency of a fluorescent fixture and adds even longer lamp life and efficiency with high output LEDs. This fixture is T4A temperature rated and comes standard with our high power 24 watt LED lamps. The lamps are protected by an aluminum framed shatter and heat resistant clear acrylic lens secured with ten draw latches and the fixture is constructed of copper free aluminum alloy. The lamp reflector is corrosion resistant heavy gauge aluminum and coated with a high gloss reflective finish. This fixture can be configured to run on 120 to 277VAC as well as 12-24VDC and is U.L. 595 and UL 1598A Marine Type approved for use marine environments. The HAL-48-2L-LED-50C is weatherproof and provides operators in hazardous locations with a highly efficient reliable and affordable lighting solution for open areas where flammable chemicals and vapors may occasionally be present. We have eliminated the ballast normally associated with fluorescent fixtures which reduces overall weight increases lamp life to an extreme 50 000 hours and helps this LED fixture maintain a T4A temperature rating. The solid state design of the included LED lamps give this fixture superior resistance to damage from vibrations and extremes in temperature as well as a lamp service life over twice that of standard T8-bulbs. The 24 watt LED lamps produce more illumination than standard T8 bulbs. The current generation of Larson Electronics LED T-series style bulbs produce 15% more
The EXHL-TRN-LE1-1227 from Larson Electronics is an Explosion Proof Portable Surface Mount LED Fixture that operates on 120-277V AC and produces 1 320 lumens while drawing only 12 watts. The EXHL-TRN-LE1-1227 is Class I Divisions 1 & 2 Groups A B C D Class I Zones 1 & 2 Groups IIB+H2 IIA Class II Divisions 1 & 2 Groups E F G and Class III Divisions 1 & 2 rated for hazardous areas and is listed for use worldwide including the United States Canada Europe and Asia. These units can operate in temperatures of -40 Celsius to 60 Celsius are waterproof to 3 meter and resist ingress of dust dirt and humidity. The housings are formed from extruded aluminum and the lenses are unbreakable polycarbonate. The LEDs offer inherent LED resistance to shocks and vibrations. This explosion proof LED light fixture features an adjustable surface mount bracket for seamless control. The included adjustable flat surface bracket has two set screws on the bracket allowing operators to loosen the mounting bracket adjust the light's tilt orientation and retighten to hold the luminary in position. A single thru-hole mounting bolt allows operators to adjust the rotation of the fixture by loosening one bolt. Terminal strips inside the fixture allow operators to make electrical connections. Wiring is fed through rigid pipe to the 3/4" NPT hubs on either side of the fixture and tied in to the fixtures terminal strips completing the electrical connection.