Brand: Lovejoy Products (Page 1)

Couplings require no lubrication and provide highly reliable service for medium duty electrical motor and internal combustion power transmission applications. The couplings are fail-safe, they will still perform if elastomer fails. Resistant to oil, dirt, sand, moisture and grease.

Double strand sprocket. Idler bolt & nuts are included with the tensioner units.

For use with F (Flex-Flex) or FFR (Flex-Rigid) couplings. Exposed bolts are the standard design. F Type coupling consists of two flex hubs, two sleeves, and one accessory kit.

Ideal for adjustable center applications where shaft -to-shaft distances are very short and belt misalignment cannot be tolerated. Or in those instances where this style needs replacement. Durable cast iron flanges.

Lovejoy Hydraulics LH coupling is specifically designed for hydraulic applications. The shortened overall length allows for easy replacement and installation with four insert durometers available. The LH design also offers more torque capacity when compared to other similar hydraulic couplings.

Lovejoy manufactures flexible couplings and power transmission products that meet International Organization for Standardization (ISO) 9001:2000 quality assurance standards. Founded in 1900, Lovejoy is headquartered in Downers Grove, IL.</p></div>

Lovejoy manufactures flexible couplings, universal joints, variable speed drives and various other transmission and mechanical power products. Their products meet the standards of the International Organization for Standardization (ISO), the Deutsches Institut f?r Normung (DIN), the American National Standards Institute (ANSI), the American Gear Manufacturers Association (AGMA), the Society of Automotive Engineers (SAE) and Japanese Industrial Standards (JIS) for quality assurance. The company, founded in 1900, is based in Downers Grove, IL.</p>

Lovejoy manufactures flexible couplings, universal joints, variable speed drives and various other transmission and mechanical power products. Their products meet the standards of the International Organization for Standardization (ISO), the Deutsches Institut f?r Normung (DIN), the American National Standards Institute (ANSI), the American Gear Manufacturers Association (AGMA), the Society of Automotive Engineers (SAE) and Japanese Industrial Standards (JIS) for quality assurance. The company, founded in 1900, is based in Downers Grove, IL.</p> </div>

Lovejoy manufactures flexible couplings, universal joints, variable speed drives and various other transmission and mechanical power products. Their products meet the standards of the International Organization for Standardization (ISO), the Deutsches Institut f?r Normung (DIN), the American National Standards Institute (ANSI), the American Gear Manufacturers Association (AGMA), the Society of Automotive Engineers (SAE) and Japanese Industrial Standards (JIS) for quality assurance. The company, founded in 1900, is based in Downers Grove, IL.</p></div>

Lovejoy manufactures flexible couplings, universal joints, variable speed drives and various other transmission and mechanical power products. Their products meet the standards of the International Organization for Standardization (ISO), the Deutsches Institut f?r Normung (DIN), the American National Standards Institute (ANSI), the American Gear Manufacturers Association (AGMA), the Society of Automotive Engineers (SAE) and Japanese Industrial Standards (JIS) for quality assurance. The company, founded in 1900, is based in Downers Grove, IL.</p><p><b>What?s in the Box?</b></p><ul><li>-3 1/2-13X3/4 Hex head cap screws</li><li>3 1/2 Split washers</li></ul><p></p> </div>

Lovejoy manufactures flexible couplings, universal joints, variable speed drives and various other transmission and mechanical power products. Their products meet the standards of the International Organization for Standardization (ISO), the Deutsches Institut f?r Normung (DIN), the American National Standards Institute (ANSI), the American Gear Manufacturers Association (AGMA), the Society of Automotive Engineers (SAE) and Japanese Industrial Standards (JIS) for quality assurance. The company, founded in 1900, is based in Downers Grove, IL.</p><p><b>What?s in the Box?</b></p><ul><li>2 Hubs</li><li>1 Center member</li></ul><p></p> </div>

Lovejoy manufactures flexible couplings, universal joints, variable speed drives and various other transmission and mechanical power products. Their products meet the standards of the International Organization for Standardization (ISO), the Deutsches Institut f?r Normung (DIN), the American National Standards Institute (ANSI), the American Gear Manufacturers Association (AGMA), the Society of Automotive Engineers (SAE) and Japanese Industrial Standards (JIS) for quality assurance. The company, founded in 1900, is based in Downers Grove, IL.</p><p><b>What?s in the Box?</b></p><ul><li>2 Hubs</li><li>1 Donut</li><li>3 5/16-18X1-3/4 Hex head cap screws</li><li>3 5/16 Split washers</li></ul><p></p> </div>

Lovejoy manufactures flexible couplings, universal joints, variable speed drives and various other transmission and mechanical power products. Their products meet the standards of the International Organization for Standardization (ISO), the Deutsches Institut f?r Normung (DIN), the American National Standards Institute (ANSI), the American Gear Manufacturers Association (AGMA), the Society of Automotive Engineers (SAE) and Japanese Industrial Standards (JIS) for quality assurance. The company, founded in 1900, is based in Downers Grove, IL.</p><p><b>What?s in the Box?</b></p><ul><li>2 Rings</li></ul><p></p> </div>

Lovejoy manufactures flexible couplings, universal joints, variable speed drives and various other transmission and mechanical power products. Their products meet the standards of the International Organization for Standardization (ISO), the Deutsches Institut f?r Normung (DIN), the American National Standards Institute (ANSI), the American Gear Manufacturers Association (AGMA), the Society of Automotive Engineers (SAE) and Japanese Industrial Standards (JIS) for quality assurance. The company, founded in 1900, is based in Downers Grove, IL.</p><p><b>What?s in the Box?</b></p><ul><li>2 snap wrap spiders w/o ring</li><li>2 collars with screws</li><li>1 spacer</li></ul><p></p></div>

Lovejoy manufactures flexible couplings, universal joints, variable speed drives and various other transmission and mechanical power products. Their products meet the standards of the International Organization for Standardization (ISO), the Deutsches Institut f?r Normung (DIN), the American National Standards Institute (ANSI), the American Gear Manufacturers Association (AGMA), the Society of Automotive Engineers (SAE) and Japanese Industrial Standards (JIS) for quality assurance. The company, founded in 1900, is based in Downers Grove, IL.</p><p><b>What?s in the Box?</b></p><ul><li>3 M6X10 Socket head cap screws</li><li>3 M6X25 Socket head cap screws</li></ul><p></p> </div>

Lovejoy manufactures flexible couplings, universal joints, variable speed drives, and other transmission and mechanical power products. The company, founded in 1900, is headquartered in Downers Grove, IL.</p></div>

Lovejoy Shaft Locking Devices expand to fill the gap between the shaft and hub, allowing for easy installation and removal, saving time over traditional interference fit techniques. The contact pressures created using a Shaft Locking Device can be greater than traditional interference fit pressures, allowing for more torque to be transmitted or shorter hubs to be used. The easy installation also allows the hub to be positioned more accurately on the shaft, and can facilitate angular timing of the hub.

Lovejoy variable speed belts are designed for long-life, even tracking, smooth running, and efficient transmission of power through wide speed ranges. They are made of special synthetic compounds to provide maximum service in conditions where oil, heat (up to 200? F), and static are present. Maximum recommended belt speed is 5,600 feet per minute.

Lovejoy's standard tensioner designed for front mounting where it is impossible to access a standard mounting bolt. A low-maintenance solution that provides a constant torque resulting in a high belt service life.

Pre-molded teeth along the diameter of the sleeve engage with teeth of the coupling flanges. No clamps or screws are needed to connect the flanges with the flexible sleeve with securely lock together under torque for smooth transmission of power. Torque is transmitted through shear loading of the sleeve. The elasticity of the material permits the S-Flex coupling to protect connected equipment from harmful shock loading, vibration, and shaft misalignment.

S flanges are made of high strength cast iron and are bored-to-size for a slip fit on standard shafts. They are easy to install, are readily available from stock in a wide range of popular bore sizes, and are supplied with two set screws at 90?.

SC Type couplings are specifically designed for the pump industry. The coupling is designed for easy quick removal.

Single strand sprocket. Idler bolt & nuts are included with the tensioner units.

TF flanges are made from the same high-strength cast iron as the S flanges, but are designed to accommodate the international standard Taper Lock bushing for easy installation and removal. TF Type flanges allow for mounting the bushing on the front (hub) side of the flange.

The C Type coupling consists of two flex hubs, one sleeve and one accessory kit consisting of seals and snap rings. Reinforced rubber seals with snap rings hold lubricant in place.

The heart of the LF Series coupling is the flexible base element. This element allows the customer to maker their own shaft hubs from steel bar stock or use existing hubs. Ideal for quick prototype testing, retrofit and high volume applications.

The Hexact Electric Control pulley operates in the same manner as the standard adjustable pulley except the hand wheel is replaced by a servo motor drive that opens and closes the pulley flanges. A separate control station, the Model CM-2601 is wired to the HEC pulley servo motor to provide speed adjustment from a remote location. The CM2601 Control must be ordered separately, and a model 501 Torque Arm Bracket is also required.

The Hexact Linear Actuation adjustable pulley can be used in place of the standard pulley where an external mechanical control is available. Typical control methods include hydraulic cylinder, air cylinder, and lever. The adapter nut located on the end of the pulley will accept a threaded rod or a clevis with cross pins. The Actuator linkage must be on the center line of the pulley but radial freedom is required to relieve loads caused by misalignment of the linkage. Actuation rate should not exceed 2-1/2 inches per minute.

The Pump/Motor Mount, commonly called the ?Bell Housing?, allows direct mounting of flange mount pumps to NEMA C-Face electric motors. This eliminates the need for coupling guards, foot brackets, shims, risers, and motor mounting plates, and assures accurate shaft alignment. The ease of assembly reduces your power unit fabrication costs.

The RunRight Rubber Suspension Unit DWI-C has one central bore, allowing a lever arm to be positioned between 2 and 360 degrees. The brackets are welded to the housing. The frictional force of this unit guarantees a secure connection of the lever arms in any position.

The RunRight Rubber Suspension Unit has 4 bore holes in the inner square and is designed to transmit alternating motions from the neutral position. A bolt through either two or all four of the bore holes can be used to mount a lever to either side of the unit. The mounts have standard Tensys 10 rubber inserts and can be used for applications operating within a -40? to 180? F temperature range.

The SX Type coupling has two flex planes, one at each disc pack, allowing this coupling to accommodate parallel, angular, and axial misalignment with specified limits. The SX coupling can be fitted with overload bushings to protect the disc pack in over torque conditions and can act as an anti-flail device. SX couplings are assembled at the time of installation on the equipment where the coupling will be in service.

The U type is the basis for all Uniflex couplings. It is a shaft-to shaft- flexible coupling with a simple one piece design, making it ideal for indexing, robotic or positioning applications. The U type consists of a triple-wound flexible steel spring brazed to a steel hub at each end. This all steel design ensures optimum equipment protection in severe environments and/or high temperature applications. Lovejoy does NOT recommend the re-boring of uniflex couplings by customers due to potential damage to the brazed joint.

This Lovejoy quick-disconnect bushing is a split-taper bushing for mounting a pulley, sheave, or sprocket on a drive shaft. It has a split hub and taper for secure compression fit mounting and a key way for secure attachment to the shaft. The split can also accommodate slightly oversized or undersized shafts with a secure grip. This quick-disconnect bushing is suitable for use with a matching companion sheave of a Lovejoy variable speed drive due to the ease of installation, secure shaft grip, and removal from the shaft without damage to parts.

Very Economical and reliable method of speed change. Allows the user to find the ideal speed without changing sheaves and belts. Can be used as a highly efficient belt tensioner with no adjustments necessary. Offers a form of "soft start", eliminating belt slip and premature wear on belt drives with inherent high torque start-up requirements.