Brand: SMC Corporation Products

All products from this brand (343 total)

A modular style regulator with built-in pressure gauge, series ARG offers an optional, built-in backflow mechanism which enables reliable discharge of air pressure from outlet to inlet.  The mounting angle of the pressure gauge is selectable depending on the piping direction, and with the anti-revolving mechanism (PAT.PEND.), the pressure gauge will not be revolved even after the handle is operated.<br></p>

A modular style regulator with built-in pressure gauge, series ARG offers an optional, built-in backflow mechanism which enables reliable discharge of air pressure from outlet to inlet.  The mounting angle of the pressure gauge is selectable depending on the piping direction, and with the anti-revolving mechanism (PAT.PEND.), the pressure gauge will not be revolved even after the handle is operated.<br></p>

Abbreviate Message Split</p>");

Air cylinder series CA2 has been introduced with specifications and dimensions equivalent to the existing CA1 series. Several improvements have been made to the CA2 series including lateral load improvement, increase in cushioning capacity and adoption of a new cushion seal. There has been enhanced efficiency in handling for cushion valve adjustment, and weight has been reduced by 5 to 15%. Stock control of the compact auto switches is easy, since a wide variety of auto switches are available. </p><ul><li>Double acting, single rod, standard type</li><li>Bore sizes (mm): 40, 50, 63, 80, 100</li><li>Standard strokes (mm): 25 to 700</li><li>Maximum operating pressure: 1.0MPa</li><li>Auto switch capable</li></ul><br><p></p>

Antistatic One-touch fittings series KA has one-touch loading and unloading. Series KA can be used in copper- free applications and in vacuum (max. -100kPa). Conductive resin is used for body and seals in fittings and tubing. Series KA is flame resistant (UL94 standard, V-0).<br></p>

Antistatic One-touch fittings series KA has one-touch loading and unloading. Series KA can be used in copper- free applications and in vacuum (max. -100kPa). Conductive resin is used for body and seals in fittings and tubing. Series KA is flame resistant (UL94 standard, V-0).<br></p>

Applications that call for precise movement ranging from 10-150mm * typically require a cylinder and a precision guide. The MXS accomplishes this by integrating a cross roller bearing with a guide and two small air cylinders for compact force genera

Applications that call for precise movement ranging from 10-150mm * typically require a cylinder and a precision guide. The MXS accomplishes this by integrating a cross roller bearing with a guide and two small air cylinders for compact force genera

Applications that call for precise movement ranging from 10-150mm * typically require a cylinder and a precision guide. The MXS accomplishes this by integrating a cross roller bearing with a guide and two small air cylinders for compact force genera

Applications that call for precise movement ranging from 10-150mm * typically require a cylinder and a precision guide. The MXS accomplishes this by integrating a cross roller bearing with a guide and two small air cylinders for compact force generation. The MXS is available in six sizes each with set stroke lengths and is standard with auto switch capability. Stroke adjustments are available for extend, retract, or both in ranges of 0-5mm, 0-15mm, and 0-25mm. In addition, there are many other standard options that include, shock absorbers, end lock, axial piping, and buffer. </p><ul><li>Air slide table</li><li>Bore size: 6, 8, 12, 16, 20, 25 *</li><li>Strokes: 5mm to 150mm, depending upon bore size</li><li>With or without stroke adjuster with or without shock</li><li>Options: buffer, end lock, axial piping</li><li>Variety of switches with a variety of wire lead lengths</li></ul><br><p></p>

Applications that call for precise movement ranging from 10-150mm * typically require a cylinder and a precision guide. The MXS accomplishes this by integrating a cross roller bearing with a guide and two small air cylinders for compact force generation. The MXS is available in six sizes each with set stroke lengths and is standard with auto switch capability. Stroke adjustments are available for extend, retract, or both in ranges of 0-5mm, 0-15mm, and 0-25mm. In addition, there are many other standard options that include, shock absorbers, end lock, axial piping, and buffer. </p><ul><li>Air slide table</li><li>Bore size: 6, 8, 12, 16, 20, 25 *</li><li>Strokes: 5mm to 150mm, depending upon bore size</li><li>With or without stroke adjuster with or without shock</li><li>Options: buffer, end lock, axial piping</li><li>Variety of switches with a variety of wire lead lengths</li></ul><br><p></p>

ASR/ASQ (PFC/QFC valve) can reduce air consumption by 25%. The PFC control valve has a pressure adjustment and speed control function.The QFC control valve offers a high speed exhaust and cylinder speedcontrol function. Series ASR/ASQ with one-touch fitting (Pressure/Flow valve),can reduce air consumption by 40%. The pressure valve has a regulator withcheck valve, plus speed controller. The flow valve offers a quick supply andexhaust valve, plus a speed controller.</p><ul><li>Can reduce air consumption by 25% </li><li>Fluid: air </li><li>Max. operating pressure: 7kgf/cm<sup> 2</sup> (700kPa) 145PSI </li><li>ASR (PFC valve): control valve that has pressure<br>adjustment and speed control functions </li><li>ASQ (QFC valve): control valve that has high<br>speed exhaust and cylinder speed control functions </li><li>Metric and NPT threads </li></ul><br><p></p>

Combining a mist separator and regulator into one unit simplifies piping and installation. This combination controls the filtration to 0.3?m, for applications that require cleaner air than regular filtration, such as air blow off. As part of the family of modular air preparation units, the AWM can be combined with other similar sized products. This series is available with port sizes from 1/8 to 1/2 with NPT, Rc or G threads. Many standard options can also be ordered such as auto-drain, gauges, etc.</p><ul><li>Modular mist separator regulator </li><li>Filtration: 0.3?m </li><li>Body size: 1/8, 3/8 and 1/2 </li><li>Port size: 1/8, 1/4, 3/8 and 1/2 </li><li>Available in thread types Rc, NPT or G(PF) </li></ul><br><p></p>

Combining a mist separator and regulator into one unit simplifies piping and installation. This combination controls the filtration to 0.3?m, for applications that require cleaner air than regular filtration, such as air blow off. As part of the family of modular air preparation units, the AWM can be combined with other similar sized products. This series is available with port sizes from 1/8 to 1/2 with NPT, Rc or G threads. Many standard options can also be ordered such as auto-drain, gauges, etc.</p><ul><li>Modular mist separator regulator </li><li>Filtration: 0.3?m </li><li>Body size: 1/8, 3/8 and 1/2 </li><li>Port size: 1/8, 1/4, 3/8 and 1/2 </li><li>Available in thread types Rc, NPT or G(PF) </li></ul><br><p></p>

Combining compact cylinder size and rotational capability, the MK2 cylinder is designed for heavy duty clamping applications, with an available integrated arm that swings out of the way when the cylinder is extended. 90deg. clockwise or counter clockwise rotation is available, and clamping arms with adjustment screw are standard options. MK2 is available in 6 bore sizes from 20mm to 63mm and stokes from 10 mm to 50 mm. </p><ul><li>Heavy duty rotary clamp cylinder </li><li>Bore sizes: 20mm-63mm </li><li>Mounting: through hole, head end flange </li><li>Available strokes: 10mm, 20mm, 50mm </li><li>Auto switches available </li></ul><br><p></p>

Combining compact cylinder size and rotational capability, the MK2 cylinder is designed for heavy duty clamping applications, with an available integrated arm that swings out of the way when the cylinder is extended. 90deg. clockwise or counter clockwise rotation is available, and clamping arms with adjustment screw are standard options. MK2 is available in 6 bore sizes from 20mm to 63mm and stokes from 10 mm to 50 mm. </p><ul><li>Heavy duty rotary clamp cylinder </li><li>Bore sizes: 20mm-63mm </li><li>Mounting: through hole, head end flange </li><li>Available strokes: 10mm, 20mm, 50mm </li><li>Auto switches available </li></ul><br><p></p>

Compact and lightweight, the KQB2 one-touch fitting uses electroless nickel plated brass components as standard specification. Its maximum operating temperature is 150<span style="FONT-SIZE: 10pt; FONT-FAMILY: Times New Roman ; mso-fareast-font-family: Times New Roman ; mso-ansi-language: EN-US; mso-fareast-language: EN-US; mso-bidi-language: AR-SA">?</span> C. KQB2 fittings can be used with fluid, and in environments having a large temperature change. Configuration variations have been improved to 17 models. Applicable tube sizes are 3.2 to 16 and 1/8" to 1/2". Series KQB2 is available with M, R, Rc, UNF, NPT or G connection threads.</p><ul><li>Threads: UNF, NPT </li><li>Compact and light weight </li><li>Grease-free </li><li>Applicable tube material: FEP, PFA, nylon, soft nylon, polyurethane, polyolefin </li><li>Electroless nickel plated (brass parts)</li></ul><br><p></p>

Compact and lightweight, the KQB2 one-touch fitting uses electroless nickel plated brass components as standard specification. Its maximum operating temperature is 150<span style="FONT-SIZE: 10pt; FONT-FAMILY: Times New Roman ; mso-fareast-font-family: Times New Roman ; mso-ansi-language: EN-US; mso-fareast-language: EN-US; mso-bidi-language: AR-SA">?</span> C. KQB2 fittings can be used with fluid, and in environments having a large temperature change. Configuration variations have been improved to 17 models. Applicable tube sizes are 3.2 to 16 and 1/8" to 1/2". Series KQB2 is available with M, R, Rc, UNF, NPT or G connection threads.</p><ul><li>Threads: UNF, NPT </li><li>Compact and light weight </li><li>Grease-free </li><li>Applicable tube material: FEP, PFA, nylon, soft nylon, polyurethane, polyolefin </li><li>Electroless nickel plated (brass parts)</li></ul><br><p></p>

Compact and lightweight, the KQB2 one-touch fitting uses electroless nickel plated brass components as standard specification. Its maximum operating temperature is 150<span style="FONT-SIZE: 10pt; FONT-FAMILY: Times New Roman ; mso-fareast-font-family: Times New Roman ; mso-ansi-language: EN-US; mso-fareast-language: EN-US; mso-bidi-language: AR-SA">?</span> C. KQB2 fittings can be used with fluid, and in environments having a large temperature change. Configuration variations have been improved to 17 models. Applicable tube sizes are 3.2 to 16 and 1/8" to 1/2". Series KQB2 is available with M, R, Rc, UNF, NPT or G connection threads.</p><ul><li>Threads: UNF, NPT </li><li>Compact and light weight </li><li>Grease-free </li><li>Applicable tube material: FEP, PFA, nylon, soft nylon, polyurethane, polyolefin </li><li>Electroless nickel plated (brass parts)</li></ul><br><p></p>

Compact and lightweight, the KQB2 one-touch fitting uses electroless nickel plated brass components as standard specification. Its maximum operating temperature is 150<span style="FONT-SIZE: 10pt; FONT-FAMILY: Times New Roman ; mso-fareast-font-family: Times New Roman ; mso-ansi-language: EN-US; mso-fareast-language: EN-US; mso-bidi-language: AR-SA">?</span> C. KQB2 fittings can be used with fluid, and in environments having a large temperature change. Configuration variations have been improved to 17 models. Applicable tube sizes are 3.2 to 16 and 1/8" to 1/2". Series KQB2 is available with M, R, Rc, UNF, NPT or G connection threads.</p><ul><li>Threads: UNF, NPT </li><li>Compact and light weight </li><li>Grease-free </li><li>Applicable tube material: FEP, PFA, nylon, soft nylon, polyurethane, polyolefin </li><li>Electroless nickel plated (brass parts)</li></ul><br><p></p>

Compact and lightweight, the KQB2 one-touch fitting uses electroless nickel plated brass components as standard specification. Its maximum operating temperature is 150<span style="FONT-SIZE: 10pt; FONT-FAMILY: Times New Roman ; mso-fareast-font-family: Times New Roman ; mso-ansi-language: EN-US; mso-fareast-language: EN-US; mso-bidi-language: AR-SA">?</span> C. KQB2 fittings can be used with fluid, and in environments having a large temperature change. Configuration variations have been improved to 17 models. Applicable tube sizes are 3.2 to 16 and 1/8" to 1/2". Series KQB2 is available with M, R, Rc, UNF, NPT or G connection threads.</p><ul><li>Threads: UNF, NPT </li><li>Compact and light weight </li><li>Grease-free </li><li>Applicable tube material: FEP, PFA, nylon, soft nylon, polyurethane, polyolefin </li><li>Electroless nickel plated (brass parts)</li></ul><br><p></p>

CONTROLLER, AC SERVO (SLAVE)

Cost effective and clean looking, series AR regulators offer various pressure range settings to accommodate most applications. The locking adjustment knob prevents accidental setting changes. The modular design of the AR series connects with other SMC air preparation equipment.</p><ul><li>Modular type regulator</li><li>Optional embedded pressure gauge </li><li>Available with built-in backflow mechanism </li><li>Knob is made of ozone resistant rubber material (HNBR) </li><li>Improved relief sensitivity </li><li>6 Sizes </li><li>Rc, NPT or G(PF) threads </li></ul><br><p></p>

Cost effective and clean looking, series AR regulators offer various pressure range settings to accommodate most applications. The locking adjustment knob prevents accidental setting changes. The modular design of the AR series connects with other SMC air preparation equipment.</p><ul><li>Modular type regulator</li><li>Optional embedded pressure gauge </li><li>Available with built-in backflow mechanism </li><li>Knob is made of ozone resistant rubber material (HNBR) </li><li>Improved relief sensitivity </li><li>6 Sizes </li><li>Rc, NPT or G(PF) threads </li></ul><br><p></p>

Cost effective and clean looking, series AR regulators offer various pressure range settings to accommodate most applications. The locking adjustment knob prevents accidental setting changes. The modular design of the AR series connects with other SMC air preparation equipment.</p><ul><li>Modular type regulator</li><li>Optional embedded pressure gauge </li><li>Available with built-in backflow mechanism </li><li>Knob is made of ozone resistant rubber material (HNBR) </li><li>Improved relief sensitivity </li><li>6 Sizes </li><li>Rc, NPT or G(PF) threads </li></ul><br><p></p>

Cost effective and clean looking, series AR regulators offer various pressure range settings to accommodate most applications. The locking adjustment knob prevents accidental setting changes.  Options include a mounting bracket and set nuts for panel mounting, and a pressure gauge.  The modular design of the AR series connects with other SMC air preparation equipment.<br></p>

Cost effective and clean looking, series AR regulators offer various pressure range settings to accommodate most applications. The locking adjustment knob prevents accidental setting changes.  Options include a mounting bracket and set nuts for panel mounting, and a pressure gauge.  The modular design of the AR series connects with other SMC air preparation equipment.<br></p>

Cost effective and clean looking, series AR regulators offer various pressure range settings to accommodate most applications. The locking adjustment knob prevents accidental setting changes.  Options include a mounting bracket and set nuts for panel mounting, and a pressure gauge.  The modular design of the AR series connects with other SMC air preparation equipment.<br></p>

Customers looking for a compact, light-weight, high flow valve for piloting process valves or actuator applications, need search no longer.  SMC s series V100 is one of the most advanced solenoid valves in today s market.  The standard V100 uses only 0.35w, which is 76% less than comparable valves.  The low power model uses only 0.1w, reflecting dramatic savings of up to 93% compared to existing products.  Weighing in at a mere 12g, with flow rates between 8.4 and 24 l/minute, it s the perfect solution when space, performance, and component weight is critical.</p><ul><li>Ultra-compact 3 port direct acting valves </li><li>Can be manifold mounted. </li><li>N.O. or N.C. options. </li><li>Power saving version.</li></ul><br><p></p>

CYL, COMPACT *LQA

CYL, GUIDE, DUAL ROD, END LOCK

Direct air operated, 2 and 3 port valve series VXA can be used with a wide variety of fluids. The manifold for the VXA21/22 series is available in a common SUP style or individual SUP style (for vacuum use). The VXA31/32 series manifold is individual ported. Valves for both are easily replaced without changing existing piping.</p><ul><li>Manifold type: B mount</li><li>Maximum stations: 10</li><li>Port size (individual port): Rc(PT) 1/8, Rc(PT) 1/4</li><li>Applicable valve: VXA31 5-00, VXA32 5-00</li><li>Possible to replace valve without changing existing piping</li></ul><br><p></p>

EX250 is a serial interface unit controlling up to 32 solenoids. This serial interface is compatible with series VQC1000/2000/4000 and SV1000/2000/3000 valves. Available protocols include DeviceNet, CC-Link, AS-i, Profibus-DP, and CANopen. Input modules can be added or removed at the point of use.</p><ul><li>IP67 enclosure (IP40 for SI unit compatible with ControlNet)</li><li>Maximum 32 inputs/32 outputs </li><li>Connection of sensor with M8/M12 connectors possible </li><li>Available communication protocols include: DeviceNet, PROFIBUS DP, CC-Link, AS-i, CANopen, ControlNet and EtherNet/IP </li><li>Applicable to valves: VQC1000/2000/4000, S0700 and SV1000/2000/3000</li></ul><br><p></p>

FITTING, ELBOW UNION, UNI *LQA

FITTING, FEMALE ELBOW

FITTING, FEMALE UNION

FITTING, MALE CONNECTOR

FITTING, MALE ELBOW

FITTING, REDUCING ELBOW

Flame resistant, one-touch fitting series KR can be used for a wide range of pressures from a low vacuum up to a pressure of 145 PSI. The use of a special profile ensures positive sealing and reduced resistance when the tube is being inserted. KR fittings are effective when piping in a confined space. The body and threaded portion can turn.</p><ul><li>Effective when piping is in a confined space</li><li>Release collar allows easy removal of tubing without damaging the tube</li><li>Ideal for areas where weld splatter is generated</li><li>Flame resistant material</li><li>Maximum operating pressure of 1.0MPa</li></ul><br><p></p>

IDF refrigerated air dryer series, in compliance with the Montreal Protocol Regulations, uses refrigerants R134a and R407C to prevent any damage to the earth s ozone layer. (Medium size series use R22). Series IDF can accommodate an inlet temperature of 40 C. Corrosion resistance is improved by using a stainless steel, plate type heat exchanger. </p><ul><li>Environmentally friendly refrigerant (R134a, R407C)</li><li>Simple control system with easy to read evaporator gauge</li><li>High efficiency stainless steel heat exchanger</li><li>Compact design</li><li>UL, CSA listed</li></ul><br><p></p>

KQ uni-fit one-touch fittings only require hand tightening to assemble and a snug of the wrench to attain a positive seal in 1/3 of the time of conventional fittings. The innovative design allows use of uni-fit one-touch fittings with NPT, NPTF, RC(PT), and G(PF) threads making the uni-fit design both versatile and time saving. KQ fittings give you identical heights when used in manifolds or other side by side applications enhancing the appearance of your equipment.  KQ fittings are available to order in multiples of 10.<span style="COLOR: #ff0000">The current KQ series fitting has been discontinued. SMC has introduced an improved version of KQ2 series, and recommends that you utilize the new series for your product designs. </span></p><ul><li>The KQ series has been discontinued, please see the <font color="#ff0000"><em><strong>New KQ2 series</strong></em></font> </li><li>One-touch fittings, metric size </li><li>Connection thread: M, R(PT), Rc(PT) </li><li>Body color: black </li><li>Release button: blue </li><li>Tube material: nylon, soft nylon, polyurethane </li></ul><br><p></p>

KQ2 one-touch, metric and inch size fittings are available in a wide variety of sizes, body styles and thread types. The specially designed packing provides positive sealing under pressure without the reduced flow common with compression fittings. The KQ2 release collar releases both the chuck and collet to provide a low disconnection force for easy removal of the tubing. KQ2 fittings are available to order in multiples of 10.<span style="color:#ff0000;">The current KQ2 series fitting has been discontinued. SMC has introduced an improved version of KQ2 series, and recommends that you utilize the new series for your product designs. </span></p><ul><li>Accepts nylon and urethane tubes</li><li>Applicable for both vacuum and positive pressure applications</li><li>Release collar allows easy removal of tubing without damaging the tube</li><li>Maximum vacuum pressure of 1.0MPa</li></ul><br><p></p>

KQ2 one-touch, metric and inch size fittings are available in a wide variety of sizes, body styles and thread types. The specially designed packing provides positive sealing under pressure without the reduced flow common with compression fittings. The KQ2 release collar releases both the chuck and collet to provide a low disconnection force for easy removal of the tubing. KQ2 fittings are available to order in multiples of 10.<span style="color:#ff0000;">The current KQ2 series fitting has been discontinued. SMC has introduced an improved version of KQ2 series, and recommends that you utilize the new series for your product designs. </span></p><ul><li>Accepts nylon and urethane tubes</li><li>Applicable for both vacuum and positive pressure applications</li><li>Release collar allows easy removal of tubing without damaging the tube</li><li>Maximum vacuum pressure of 1.0MPa</li></ul><br><p></p>

KQ2 one-touch, metric and inch size fittings are available in a wide variety of sizes, body styles and thread types. The specially designed packing provides positive sealing under pressure without the reduced flow common with compression fittings. The KQ2 release collar releases both the chuck and collet to provide a low disconnection force for easy removal of the tubing. KQ2 fittings are available to order in multiples of 10.<span style="color:#ff0000;">The current KQ2 series fitting has been discontinued. SMC has introduced an improved version of KQ2 series, and recommends that you utilize the new series for your product designs. </span></p><ul><li>Accepts nylon and urethane tubes</li><li>Applicable for both vacuum and positive pressure applications</li><li>Release collar allows easy removal of tubing without damaging the tube</li><li>Maximum vacuum pressure of 1.0MPa</li></ul><br><p></p>

KQ2 one-touch, metric and inch size fittings are available in a wide variety of sizes, body styles and thread types. The specially designed packing provides positive sealing under pressure without the reduced flow common with compression fittings. The KQ2 release collar releases both the chuck and collet to provide a low disconnection force for easy removal of the tubing. KQ2 fittings are available to order in multiples of 10.<span style="color:#ff0000;">The current KQ2 series fitting has been discontinued. SMC has introduced an improved version of KQ2 series, and recommends that you utilize the new series for your product designs. </span></p><ul><li>Accepts nylon and urethane tubes</li><li>Applicable for both vacuum and positive pressure applications</li><li>Release collar allows easy removal of tubing without damaging the tube</li><li>Maximum vacuum pressure of 1.0MPa</li></ul><br><p></p>

KQ2 one-touch, metric and inch size fittings are available in a wide variety of sizes, body styles and thread types. The specially designed packing provides positive sealing under pressure without the reduced flow common with compression fittings. The KQ2 release collar releases both the chuck and collet to provide a low disconnection force for easy removal of the tubing. KQ2 fittings are available to order in multiples of 10.<span style="color:#ff0000;">The current KQ2 series fitting has been discontinued. SMC has introduced an improved version of KQ2 series, and recommends that you utilize the new series for your product designs. </span></p><ul><li>Accepts nylon and urethane tubes</li><li>Applicable for both vacuum and positive pressure applications</li><li>Release collar allows easy removal of tubing without damaging the tube</li><li>Maximum vacuum pressure of 1.0MPa</li></ul><br><p></p>

KQ2 one-touch, metric and inch size fittings are available in a wide variety of sizes, body styles and thread types. The specially designed packing provides positive sealing under pressure without the reduced flow common with compression fittings. The KQ2 release collar releases both the chuck and collet to provide a low disconnection force for easy removal of the tubing. KQ2 fittings are available to order in multiples of 10.<span style="color:#ff0000;">The current KQ2 series fitting has been discontinued. SMC has introduced an improved version of KQ2 series, and recommends that you utilize the new series for your product designs. </span></p><ul><li>Accepts nylon and urethane tubes</li><li>Applicable for both vacuum and positive pressure applications</li><li>Release collar allows easy removal of tubing without damaging the tube</li><li>Maximum vacuum pressure of 1.0MPa</li></ul><br><p></p>

KQ2 one-touch, metric and inch size fittings are available in a wide variety of sizes, body styles and thread types. The specially designed packing provides positive sealing under pressure without the reduced flow common with compression fittings. The KQ2 release collar releases both the chuck and collet to provide a low disconnection force for easy removal of the tubing. KQ2 fittings are available to order in multiples of 10.<span style="color:#ff0000;">The current KQ2 series fitting has been discontinued. SMC has introduced an improved version of KQ2 series, and recommends that you utilize the new series for your product designs. </span></p><ul><li>Accepts nylon and urethane tubes</li><li>Applicable for both vacuum and positive pressure applications</li><li>Release collar allows easy removal of tubing without damaging the tube</li><li>Maximum vacuum pressure of 1.0MPa</li></ul><br><p></p>

KQ2 one-touch, metric and inch size fittings are available in a wide variety of sizes, body styles and thread types. The specially designed packing provides positive sealing under pressure without the reduced flow common with compression fittings. The KQ2 release collar releases both the chuck and collet to provide a low disconnection force for easy removal of the tubing. KQ2 fittings are available to order in multiples of 10.<span style="color:#ff0000;">The current KQ2 series fitting has been discontinued. SMC has introduced an improved version of KQ2 series, and recommends that you utilize the new series for your product designs. </span></p><ul><li>Accepts nylon and urethane tubes</li><li>Applicable for both vacuum and positive pressure applications</li><li>Release collar allows easy removal of tubing without damaging the tube</li><li>Maximum vacuum pressure of 1.0MPa</li></ul><br><p></p>

KQ2 one-touch, metric and inch size fittings are available in a wide variety of sizes, body styles and thread types. The specially designed packing provides positive sealing under pressure without the reduced flow common with compression fittings. The KQ2 release collar releases both the chuck and collet to provide a low disconnection force for easy removal of the tubing. KQ2 fittings are available to order in multiples of 10.<span style="color:#ff0000;">The current KQ2 series fitting has been discontinued. SMC has introduced an improved version of KQ2 series, and recommends that you utilize the new series for your product designs. </span></p><ul><li>Accepts nylon and urethane tubes</li><li>Applicable for both vacuum and positive pressure applications</li><li>Release collar allows easy removal of tubing without damaging the tube</li><li>Maximum vacuum pressure of 1.0MPa</li></ul><br><p></p>

KQ2 one-touch, metric and inch size fittings are available in a wide variety of sizes, body styles and thread types. The specially designed packing provides positive sealing under pressure without the reduced flow common with compression fittings. The KQ2 release collar releases both the chuck and collet to provide a low disconnection force for easy removal of the tubing. KQ2 fittings are available to order in multiples of 10.<span style="color:#ff0000;">The current KQ2 series fitting has been discontinued. SMC has introduced an improved version of KQ2 series, and recommends that you utilize the new series for your product designs. </span></p><ul><li>Accepts nylon and urethane tubes</li><li>Applicable for both vacuum and positive pressure applications</li><li>Release collar allows easy removal of tubing without damaging the tube</li><li>Maximum vacuum pressure of 1.0MPa</li></ul><br><p></p>

KQ2 one-touch, metric and inch size fittings are available in a wide variety of sizes, body styles and thread types. The specially designed packing provides positive sealing under pressure without the reduced flow common with compression fittings. The KQ2 release collar releases both the chuck and collet to provide a low disconnection force for easy removal of the tubing. KQ2 fittings are available to order in multiples of 10.<span style="color:#ff0000;">The current KQ2 series fitting has been discontinued. SMC has introduced an improved version of KQ2 series, and recommends that you utilize the new series for your product designs. </span></p><ul><li>Accepts nylon and urethane tubes</li><li>Applicable for both vacuum and positive pressure applications</li><li>Release collar allows easy removal of tubing without damaging the tube</li><li>Maximum vacuum pressure of 1.0MPa</li></ul><br><p></p>

KQ2 one-touch, metric and inch size fittings are available in a wide variety of sizes, body styles and thread types. The specially designed packing provides positive sealing under pressure without the reduced flow common with compression fittings. The KQ2 release collar releases both the chuck and collet to provide a low disconnection force for easy removal of the tubing. KQ2 fittings are available to order in multiples of 10.<span style="color:#ff0000;">The current KQ2 series fitting has been discontinued. SMC has introduced an improved version of KQ2 series, and recommends that you utilize the new series for your product designs. </span></p><ul><li>Accepts nylon and urethane tubes</li><li>Applicable for both vacuum and positive pressure applications</li><li>Release collar allows easy removal of tubing without damaging the tube</li><li>Maximum vacuum pressure of 1.0MPa</li></ul><br><p></p>

KQ2 one-touch, metric and inch size fittings are available in a wide variety of sizes, body styles and thread types. The specially designed packing provides positive sealing under pressure without the reduced flow common with compression fittings. The KQ2 release collar releases both the chuck and collet to provide a low disconnection force for easy removal of the tubing. KQ2 fittings are available to order in multiples of 10.<span style="color:#ff0000;">The current KQ2 series fitting has been discontinued. SMC has introduced an improved version of KQ2 series, and recommends that you utilize the new series for your product designs. </span></p><ul><li>Accepts nylon and urethane tubes</li><li>Applicable for both vacuum and positive pressure applications</li><li>Release collar allows easy removal of tubing without damaging the tube</li><li>Maximum vacuum pressure of 1.0MPa</li></ul><br><p></p>

Lightweight, compact, and precision control make these speed controls the right choice for many heavy-duty applications. These speed controls are offered with in-line and elbow construction to give the widest choice to your unique application. Locki

Lightweight, compact, and precision control make these speed controls the right choice for many heavy-duty applications. These speed controls are offered with in-line and elbow construction to give the widest choice to your unique application. Locking nuts are included as standard as well as simplified mounting. Thread sizes range from M3 to 2 and are available in both inch (NPT) and metric R/Rc(PT)</p><ul><li>In-line push locking style</li><li>Port sizes: 1/4, 3/8</li></ul><br><p></p>

Lightweight, compact, and precision control make these speed controls the right choice for many heavy-duty applications. These speed controls are offered with in-line and elbow construction to give the widest choice to your unique application. Locking nuts are included as standard as well as simplified mounting. Thread sizes range from M3 to 2 and are available in both inch (NPT) and metric R/Rc(PT)</p><ul><li>Large flow in-line style</li><li>Body sizes: 1/2, 3/4, 1, 1-1/4, 1-1/2</li><li>Port sizes: 1/4, 3/8, 1/2, 3/4, 1, 1-1/4, 1-1/2, 2</li></ul><br><p></p>

Lightweight, compact, and precision control make these speed controls the right choice for many heavy-duty applications. These speed controls are offered with in-line and elbow construction to give the widest choice to your unique application. Locking nuts are included as standard as well as simplified mounting. Thread sizes range from M3 to 2 and are available in both inch (NPT) and metric R/Rc(PT)</p><ul><li>Large flow in-line style</li><li>Body sizes: 1/2, 3/4, 1, 1-1/4, 1-1/2</li><li>Port sizes: 1/4, 3/8, 1/2, 3/4, 1, 1-1/4, 1-1/2, 2</li></ul><br><p></p>

Lightweight, compact, and precision control make these speed controls the right choice for many heavy-duty applications. These speed controls are offered with in-line and elbow construction to give the widest choice to your unique application. Locking nuts are included as standard as well as simplified mounting. Thread sizes range from M3 to 2 and are available in both inch (NPT) and metric R/Rc(PT)</p><ul><li>Large flow in-line style</li><li>Body sizes: 1/2, 3/4, 1, 1-1/4, 1-1/2</li><li>Port sizes: 1/4, 3/8, 1/2, 3/4, 1, 1-1/4, 1-1/2, 2</li></ul><br><p></p>

Lightweight, compact, and precision control make these speed controls the right choice for many heavy-duty applications. These speed controls are offered with in-line and elbow construction to give the widest choice to your unique application. Locking nuts are included as standard as well as simplified mounting. Thread sizes range from M3 to 2 and are available in both inch (NPT) and metric R/Rc(PT)</p><ul><li>Large flow in-line style</li><li>Body sizes: 1/2, 3/4, 1, 1-1/4, 1-1/2</li><li>Port sizes: 1/4, 3/8, 1/2, 3/4, 1, 1-1/4, 1-1/2, 2</li></ul><br><p></p>

Lightweight, compact, and precision control make these speed controls the right choice for many heavy-duty applications. These speed controls are offered with in-line and elbow construction to give the widest choice to your unique application. Locking nuts are included as standard as well as simplified mounting. Thread sizes range from M3 to 2 and are available in both inch (NPT) and metric R/Rc(PT)</p><ul><li>Large flow in-line style</li><li>Body sizes: 1/2, 3/4, 1, 1-1/4, 1-1/2</li><li>Port sizes: 1/4, 3/8, 1/2, 3/4, 1, 1-1/4, 1-1/2, 2</li></ul><br><p></p>