Brand: Wiegmann Products

All products from this brand (32 total)

B000LEW57G
B007I9W8BU
B007IAIMBE
B007IASB7Y
Bodies and covers are fabricated from 14 gauge steel. HS Series combination hinge/screw cover design offers easy access to open top for "lay-in" of wireway. Screws do not need to be removed to open top.
Bodies and doors fabricated from 12 gauge CRS. Floor mounting feet fabricated from 10 gauge CRS. Continuously welded seams ground smooth, less knockouts or holes. Heavy gauge continuous hinges support each door. Special overlapping door design eliminates need for center post. 3-point key locking-padlocking combo handle. Print pocket is provided. Standard 12" high floor kits are welded to bottom of enclosure. Heavy duty lifting eyes. Strong, rigid constructions with body stiffeners. Doors are sealed with poured-in-place polyurethane gasket. Grounding provisions provided. Back panel supports. Collar studs for mounting optional back panels are provided.
Bodies and doors fabricated from 14 gauge steel. Continuously plasma welded seams. Increased tub opening for better access. Concealed hinges. Doors are interchangeable and easily removable. Grounding provisions provided. 1/4-turn semi-flush oil tight latches are supplied to hold door securely closed. Print pocket is provided. Doors are sealed with poured-in-place polyurethane gasket. Mounting holes in rear of enclosure. Studs for mounting optional back panel (the Ultimate back panels have increased in size to accommodate larger foot-print installations.
Bodies and doors fabricated from 14 gauge steel. Continuously Plasma welded seams. Rolled lip on three sides of door and all sides of enclosure opening is provided to exclude liquids and contaminants. Quick and easy to operate door clamps are provided. Doors removable by pulling heavy gauge continuous hinged pin. Hasp and staple for padlocking. Print pocket is provided. Doors are sealed with poured-in-place polyurethane gasket. Collar studs provided for mounting optional sub panels. External mounting feet for mounting enclosure. Grounding provisions provided. Optional panels must be ordered separately.
Bodies and doors fabricated from 14 gauge steel. Continuously Plasma welded seams. Rolled lip on three sides of door and all sides of enclosure opening is provided to exclude liquids and contaminants. Quick and easy to operate door clamps are provided. Doors removable by pulling heavy gauge continuous hinged pin. Hasp and staple for padlocking. Print pocket is provided. Doors are sealed with poured-in-place polyurethane gasket. Collar studs provided for mounting optional sub panels. External mounting feet for mounting enclosure. Grounding provisions provided. Optional panels must be ordered separately.
Bodies and doors fabricated from 14 gauge steel. Continuously plasma welded seams. Rolled lip on three sides of door and all sides of enclosure opening is provided to exclude liquids and contaminants. Quick and easy to operate stainless steel door clamps are provided. Doors are removable by pulling stainless steel continuous hinged pin. Hasp and staple for padlocking. Print pocket is provided. Doors are sealed with poured-in-place polyurethane gasket. Collar studs provided for mounting optional back panels. External mounting feet for mounting enclosure. Grounding provisions provided. Optional back panels must be ordered separately.
Bodies and doors fabricated from 14 gauge steel. Continuously welded seams ground smooth, less knockouts or holes. Captivated cover screws thread into sealed wells. Control panel is continuously hinged along bottom edge. Closed cell oil resistant neoprene gasket. Grounding provisions provided.
Bodies and doors fabricated from 14 gauge steel. Continuously welded seams ground smooth. Closed cell oil resistant neoprene gasket. External mounting plates, top and bottom of enclosure. Captivated cover screws thread into sealed wells. Grounding provisions provided.
Bodies and doors fabricated from 16 gauge pre-galvanized steel. Drip shield top and smooth seamless sides and front. A slip-on reversible cover is securely fastened with screws located along bottom edge. No gasket is required. Hasp for padlocking or meter seal is provided.
Bodies and doors fabricated from 16 gauge steel. 6" depth boxes are furnished with clamp style hinges allowing for removable/replaceable covers. Various sizes of removable concentric knockouts are furnished on all four sides of standard cutout boxes. Mounting holes on back of box.
Bodies and doors fabricated from 16 gauge type 304 stainless steel. Continuously welded seams ground smooth, less knockouts or holes. Sealed with poured-in-place polyurethane gasket. External mounting feet. Weld nuts are provided to secure optional back panel. Stainless steel screws and clamps, equal to enclosure construction, on three sides of cover assure water tight seal. Door removed by pulling stainless steel continuous hinged pin. Grounding provisions provided. Optional panels and terminal kits must be ordered separately.
Carbon steel 90 Degree elbow fitting.
Covers are 14 gauge carbon steel.
Fabricated from 12 gauge steel. Continuously welded seams ground smooth, less holes or knockouts. Heavy duty lifting eyes for easy handling. Heavy gauge continuous hinges support each door. 3-point key locking-padlocking combo handle. Print pocket is provided. "Uni-strut" mounting channels are welded horizontally to interior body sides and top, bottom, and center to allow back panels to be positioned in enclosure. Optional swing, half, full, and rack panels can be mounted anywhere along "uni-strut" channel. Doors are sealed with poured in place polyurethane gasket. Grounding provisions provided.
Fabricated from 12 gauge steel. Continuously welded seams ground smooth, less holes or knockouts. Heavy duty lifting eyes for easy handling. Heavy gauge continuous hinges support each door. 3-point key locking-padlocking combo handle. Print pocket is provided. "Uni-strut" mounting channels are welded horizontally to interior body sides and top, bottom, and center to allow back panels to be positioned in enclosure. Optional swing, half, full, and rack panels can be mounted anywhere along "uni-strut" channel. Doors are sealed with poured in place polyurethane gasket. Grounding provisions provided.
Fabricated from 14 gauge G-90 pre-galvanized steel. Flat, removable covers fastened with plated steel screws. Cover design permits easy removal without extracting cover screws. Mounting holes on back of box. Removable concentric knockouts on all four sides.
Fabricated from 14 gauge steel. Continuously welded seams ground smooth. Closed cell oil resistant neoprene gasket. External mounting plates, top and bottom of enclosure. Captivated cover screws thread into sealed wells. Standard "4-way" miniature pushbutton holes accept all standard brands of miniature push buttons, switches, and pilot lights. Grounding provisions provided.
Features: Flat, removable covers fastened with plated steel screws Mounting holes on back of box Removable concentric knockouts on all four sides Constructed from 16 gauge steel Specifications: Height: 8" Width: 8" Depth: 4"
Floor Stand Kit, Material Carbon Steel, Finish ANSI 61 Gray Polyester Powder, For Use With Steel Enclosures, Sub-Category Mounting Accessories, Application Kits are Used to Elevate Enclosures From Floor Surface, Height 6.00 In., Length 18.00 In., Width 8.00 In., Includes Mounting Hardware, Gauge 10
Galvanized 45? elbow fitting.
Panels fit the following enclosures: B, BCH, BN4, BN4CH, BN4SS, BN4CHSS, BN4AL, BN4CHAL.
Panels fit the following enclosures: B, BCH, BN4, BN4CH, BN4SS, BN4CHSS, BN4AL, BN4CHAL.
Stainless steel panels are 14 gauge. Panels fit the following enclosures: B, BCH, BN4, BN4CH, BN4SS, BN4CHSS, BN4AL, BN4CHAL.
Steel panels are 12 gauge. Panel with any side over 20.00" has 3/4" flange on all sides. Steel panels are painted white smooth hybrid. Panels fit the following enclosures: NEMA 1, Large (NIC); NEMA 3R, hinged Cover (RHC, Large); NEMA 4, 412, & 4X Single Door (N12, N4, N412, SSN4, SSN43PT, SSN43PTW); NEMA 12, 2-Door Wall-Mount (WAWF), Single Door; Right Flange Disconnect (SDN12, ABM12); Large JIC (B-CH, Large) Single door N12.
Steel panels are 12 gauge. Steel panels are painted white smooth hybrid. Panels fit the following enclosures: NEMA 1, Large (NIC); NEMA 3R, hinged Cover (RHC, Large); NEMA 4, 412, & 4X Single Door (N12, N4, N412, SSN4, SSN43PT, SSN43PTW); NEMA 12, 2-Door Wall-Mount (WAWF), Single Door; Right Flange Disconnect (SDN12, ABM12); Large JIC (B-CH, Large) Single door N12.
Steel panels are 14 gauge and have a white smooth hybrid finish. Panels fit the following enclosures: B, BCH, BN4, BN4CH, BN4SS, BN4CHSS, BN4AL, BN4CHAL.
This enclosure is designed for use as a junction box and pull box in commercial and general industrial applications. Enclosure, Mtlc, 15In.Hx 15In.Wx6In.D
Wiegmann Ljw45, Lay-In Wireway, Length: 60", Width: 4", Height: 4",