Emuge Corporation Products

All products from this brand (1171 total)

Emuge 1827A.0500 Hard-Cut 1827A Standard Length Square End Mill, 1/2 in Dia Cutter, 1 in Max Depth of Cut, 6 Flutes, 1/2 in Dia Shank, 3-1/4 in OAL | BlackHawk Industrial Supply

Emuge 1828A.0500 Hard-Cut 1828A Extra Length Square End Mill, 1/2 in Dia Cutter, 1-1/2 in Max Depth of Cut, 6 Flutes, 1/2 in Dia Shank, 3-3/4 in OAL | BlackHawk Industrial Supply

Emuge 1877A.00106 Hard-Cut 1877A Extra Short Length Ball Nose End Mill, 1 mm Dia Cutter, 4 mm Max Depth of Cut, 2 Flutes, 6 mm Dia Shank, 50 mm OAL | BlackHawk Industrial Supply

Emuge 1877A.0375 Hard-Cut 1877A Extra Short Length Ball Nose End Mill, 3/8 in Dia Cutter, 9/16 in Max Depth of Cut, 2 Flutes, 3/8 in Dia Shank, 2-3/4 in OAL | BlackHawk Industrial Supply

Emuge 1916A.003 Top-Cut 1916A Stub Length Square End Mill, 3 mm Dia Cutter, 5 mm Max Depth of Cut, 4 Flutes, 6 mm Dia Shank, 50 mm OAL | BlackHawk Industrial Supply

Emuge 1926A.0500 Jet-Cut 1926A Long Length Square End Mill, 1/2 in Dia Cutter, 1 in Max Depth of Cut, 4 Flutes, 1/2 in Dia Shank, 3 in OAL | BlackHawk Industrial Supply

Emuge 1935A.012160 Top-Cut 1935A Extra Long Length Lollipop Style Ball Nose End Mill, 12 mm Dia Cutter, 9 mm Max Depth of Cut, 2 Flutes, 12 mm Dia Shank, 160 mm OAL | BlackHawk Industrial Supply

Emuge 1936A.0500 Hard-Cut 1936A Short Length Torus End Corner Radius End Mill, 1/2 in Dia Cutter, 1/8 in Corner Radius, 1/4 in Max Depth of Cut, 4 Flutes, 1/2 in Dia Shank, 3-1/4 in OAL | BlackHawk Industrial Supply

Emuge 1963A.001 Hard-Cut 1963A Extra Long Length Ball Nose End Mill, 1 mm Dia Cutter, 2 mm Max Depth of Cut, 2 Flutes, 6 mm Dia Shank, 80 mm OAL | BlackHawk Industrial Supply

Emuge 1963A.005 Hard-Cut 1963A Extra Long Length Ball Nose End Mill, 5 mm Dia Cutter, 5 mm Max Depth of Cut, 2 Flutes, 6 mm Dia Shank, 80 mm OAL | BlackHawk Industrial Supply

Emuge 1963A.006 Hard-Cut 1963A Extra Long Length Ball Nose End Mill, 6 mm Dia Cutter, 6 mm Max Depth of Cut, 2 Flutes, 6 mm Dia Shank, 80 mm OAL | BlackHawk Industrial Supply

Emuge 1963A.010 Hard-Cut 1963A Extra Long Length Ball Nose End Mill, 10 mm Dia Cutter, 8 mm Max Depth of Cut, 2 Flutes, 10 mm Dia Shank, 120 mm OAL | BlackHawk Industrial Supply

Emuge 1963A.01216 Hard-Cut 1963A Extra Long Length Tapered Ball Nose End Mill, 12 mm Dia Cutter, 10 mm Max Depth of Cut, 2 Flutes, 16 mm Dia Shank, 200 mm OAL | BlackHawk Industrial Supply

Emuge 1966A.0005 Top-Cut 1966A Stub Length Ball Nose End Mill, 0.5 mm Dia Cutter, 1 mm Max Depth of Cut, 2 Flutes, 6 mm Dia Shank, 57 mm OAL | BlackHawk Industrial Supply

Emuge 1966A.01216 Top-Cut 1966A Stub Length Ball Nose End Mill, 12 mm Dia Cutter, 10 mm Max Depth of Cut, 2 Flutes, 16 mm Dia Shank, 92 mm OAL | BlackHawk Industrial Supply

Emuge 1973A.009375 Hard-Cut 1973A Stub Length Ball Nose End Mill, 3/32 in Dia Cutter, 1/16 in Max Depth of Cut, 2 Flutes, 1/4 in Dia Shank, 2 in OAL | BlackHawk Industrial Supply

Emuge 1973A.01875 Hard-Cut 1973A Stub Length Ball Nose End Mill, 3/16 in Dia Cutter, 7/64 in Max Depth of Cut, 2 Flutes, 1/4 in Dia Shank, 2 in OAL | BlackHawk Industrial Supply

Emuge 1976A.012 Hard-Cut 1976A Stub Length Ball Nose End Mill, 12 mm Dia Cutter, 10 mm Max Depth of Cut, 2 Flutes, 12 mm Dia Shank, 83 mm OAL | BlackHawk Industrial Supply

Emuge 1976A.0250 Hard-Cut 1976A Stub Length Ball Nose End Mill, 1/4 in Dia Cutter, 1/4 in Max Depth of Cut, 2 Flutes, 1/4 in Dia Shank, 2 in OAL | BlackHawk Industrial Supply

Emuge 1976A.04375 Hard-Cut 1976A Stub Length Ball Nose End Mill, 7/16 in Dia Cutter, 11/32 in Max Depth of Cut, 2 Flutes, 7/16 in Dia Shank, 2 in OAL | BlackHawk Industrial Supply

Emuge 1996A.005 Hard-Cut 1996A Short Length Torus End Corner Radius End Mill, 5 mm Dia Cutter, 1.5 mm Corner Radius, 5 mm Max Depth of Cut, 2 Flutes, 6 mm Dia Shank, 57 mm OAL | BlackHawk Industrial Supply

Emuge 2512A.003 Top-Cut 2512A Standard Length Square End Mill, 3 mm Dia Cutter, 10 mm Max Depth of Cut, 2 Flutes, 6 mm Dia Shank, 57 mm OAL | BlackHawk Industrial Supply

Emuge 2512A.008 Top-Cut 2512A Standard Length Square End Mill, 8 mm Dia Cutter, 25 mm Max Depth of Cut, 2 Flutes, 8 mm Dia Shank, 63 mm OAL | BlackHawk Industrial Supply

Emuge 2514A.003 Top-Cut 2514A Extra Length Square End Mill, 3 mm Dia Cutter, 12 mm Max Depth of Cut, 2 Flutes, 6 mm Dia Shank, 62 mm OAL | BlackHawk Industrial Supply

Emuge 2516A.0097 Top-Cut 2516A Stub Length Square End Mill, 9.7 mm Dia Cutter, 11 mm Max Depth of Cut, 3 Flutes, 10 mm Dia Shank, 66 mm OAL | BlackHawk Industrial Supply

Emuge 2518A.002 Top-Cut 2518A Standard Length Square End Mill, 2 mm Dia Cutter, 6 mm Max Depth of Cut, 3 Flutes, 6 mm Dia Shank, 57 mm OAL | BlackHawk Industrial Supply

Emuge 2519A.002 Top-Cut 2519A Standard Length Square End Mill, 2 mm Dia Cutter, 6 mm Max Depth of Cut, 3 Flutes, 6 mm Dia Shank, 57 mm OAL | BlackHawk Industrial Supply

Emuge 2520A.010 Top-Cut 2520A Extra Length Square End Mill, 10 mm Dia Cutter, 30 mm Max Depth of Cut, 3 Flutes, 10 mm Dia Shank, 80 mm OAL | BlackHawk Industrial Supply

Emuge 2520A.012 Top-Cut 2520A Extra Length Square End Mill, 12 mm Dia Cutter, 36 mm Max Depth of Cut, 3 Flutes, 12 mm Dia Shank, 93 mm OAL | BlackHawk Industrial Supply

Emuge 2524A.010 Top-Cut 2524A Extra Length Multi-Flute Square End Mill, 10 mm Dia Cutter, 30 mm Max Depth of Cut, 6 Flutes, 10 mm Dia Shank, 80 mm OAL | BlackHawk Industrial Supply

Emuge 2524A.012 Top-Cut 2524A Extra Length Multi-Flute Square End Mill, 12 mm Dia Cutter, 36 mm Max Depth of Cut, 6 Flutes, 12 mm Dia Shank, 93 mm OAL | BlackHawk Industrial Supply

Emuge 2531L.006 Trochoidal Jet-Cut 2531L Square End Mill, 6 mm Dia Cutter, 2XD Max Depth of Cut, 4 Flutes, 6 mm Dia Shank, 57 mm OAL | BlackHawk Industrial Supply

Emuge 2535L.006 Trochoidal Jet-Cut 2535L Square End Mill, 6 mm Dia Cutter, 4XD Max Depth of Cut, 4 Flutes, 6 mm Dia Shank, 68 mm OAL | BlackHawk Industrial Supply

Emuge 2535L.020 Trochoidal Jet-Cut 2535L Square End Mill, 20 mm Dia Cutter, 4XD Max Depth of Cut, 5 Flutes, 20 mm Dia Shank, 150 mm OAL | BlackHawk Industrial Supply

Emuge 2571L.0500 Trochoidal Jet-Cut 2571L Square End Mill, 1/2 in Dia Cutter, 2XD Max Depth of Cut, 5 Flutes, 1/2 in Dia Shank, 3-1/4 in OAL | BlackHawk Industrial Supply

Emuge 2575L.0250 Trochoidal Jet-Cut 2575L Square End Mill, 1/4 in Dia Cutter, 4XD Max Depth of Cut, 4 Flutes, 1/4 in Dia Shank, 2-3/4 in OAL | BlackHawk Industrial Supply

Emuge 2581TZ.0500 Trochoidal TiNox-Cut 2581TZ Square End Mill With Axial Through Coolant, 1/2 in Dia Cutter, 4XD Max Depth of Cut, 5 Flutes, 1/2 in Dia Shank, 4-1/4 in OAL | BlackHawk Industrial Supply

Emuge 2607.150420 Dental 2607 Ball Nose End Mill, 1.5 mm Dia Cutter, 20 mm Max Depth of Cut, 1 Flutes, 4 mm Dia Shank, 47 mm OAL | BlackHawk Industrial Supply

Emuge 2617AZ.010 Multi-Cut 2617AZ Duplex Geometry Extra Length Square End Corner Radius End Mill With Axial Through Coolant, 10 mm Dia Cutter, 1.2 mm Corner Radius, 22 mm Max Depth of Cut, 4 Flutes, 10 mm Dia Shank, 80 mm OAL | BlackHawk Industrial Supply

Emuge 2628A.150608 Dental 2628A Ball Nose End Mill, 1.5 mm Dia Cutter, 8 mm Max Depth of Cut, 4 Flutes, 6 mm Dia Shank, 57 mm OAL | BlackHawk Industrial Supply

Emuge 2642TZ.020040 TiNox-Cut 2642TZ Stub Length Square End Corner Radius End Mill With Axial Through Coolant, 20 mm Dia Cutter, 4 mm Corner Radius, 26 mm Max Depth of Cut, 4 Flutes, 20 mm Dia Shank, 92 mm OAL | BlackHawk Industrial Supply

Emuge 2644T.012 TiNox-Cut 2644T Extra Length Square End Mill, 12 mm Dia Cutter, 36 mm Max Depth of Cut, 5 Flutes, 12 mm Dia Shank, 93 mm OAL | BlackHawk Industrial Supply

Emuge 2646TZ.008 TiNox-Cut 2646TZ Stub Length Square End Mill With Axial Through Coolant, 8 mm Dia Cutter, 12 mm Max Depth of Cut, 4 Flutes, 8 mm Dia Shank, 58 mm OAL | BlackHawk Industrial Supply

Emuge 2648TZ.0500 TiNox-Cut 2648TZ Standard Length Square End Mill With Axial Through Coolant, 1/2 in Dia Cutter, 1-1/8 in Max Depth of Cut, 4 Flutes, 1/2 in Dia Shank, 3-1/4 in OAL | BlackHawk Industrial Supply

Emuge 2649TZ.016 TiNox-Cut 2649TZ Standard Length Square End Mill With Axial Through Coolant, 16 mm Dia Cutter, 32 mm Max Depth of Cut, 4 Flutes, 16 mm Dia Shank, 92 mm OAL | BlackHawk Industrial Supply

Emuge 2650AZ.020 TiNox-Cut 2650AZ Square End Mill With Axial Through Coolant, 20 mm Dia Cutter, 38 mm Max Depth of Cut, 4 Flutes, 20 mm Dia Shank, 126 mm OAL | BlackHawk Industrial Supply

Emuge 2654T.016040 TiNox-Cut 2654T Extra Length Square End Corner Radius End Mill With Axial Through Coolant, 16 mm Dia Cutter, 4 mm Corner Radius, 48 mm Max Depth of Cut, 5 Flutes, 16 mm Dia Shank, 112 mm OAL | BlackHawk Industrial Supply

Emuge 2656TZ.006 TiNox-Cut 2656TZ Extra Length Square End Mill With Axial Through Coolant, 6 mm Dia Cutter, 13 mm Max Depth of Cut, 4 Flutes, 6 mm Dia Shank, 62 mm OAL | BlackHawk Industrial Supply

Emuge 2656TZ.008 TiNox-Cut 2656TZ Extra Length Square End Mill With Axial Through Coolant, 8 mm Dia Cutter, 19 mm Max Depth of Cut, 4 Flutes, 8 mm Dia Shank, 68 mm OAL | BlackHawk Industrial Supply

Emuge 2656TZ.012 TiNox-Cut 2656TZ Extra Length Square End Mill With Axial Through Coolant, 12 mm Dia Cutter, 26 mm Max Depth of Cut, 4 Flutes, 12 mm Dia Shank, 93 mm OAL | BlackHawk Industrial Supply

Emuge 2657TZ.006 TiNox-Cut 2657TZ Extra Length Square End Mill With Axial Through Coolant, 6 mm Dia Cutter, 13 mm Max Depth of Cut, 4 Flutes, 6 mm Dia Shank, 62 mm OAL | BlackHawk Industrial Supply

Emuge 2659TZ.008010 TiNox-Cut 2659TZ Extra Length Square End Corner Radius End Mill With Axial Through Coolant, 8 mm Dia Cutter, 1 mm Corner Radius, 19 mm Max Depth of Cut, 4 Flutes, 8 mm Dia Shank, 68 mm OAL | BlackHawk Industrial Supply

Emuge 2659TZ.016040 TiNox-Cut 2659TZ Extra Length Square End Corner Radius End Mill With Axial Through Coolant, 16 mm Dia Cutter, 4 mm Corner Radius, 32 mm Max Depth of Cut, 4 Flutes, 16 mm Dia Shank, 108 mm OAL | BlackHawk Industrial Supply

Emuge 2667A.008 Multi-Cut 2667A Ball Nose End Mill, 8 mm Dia Cutter, 19 mm Max Depth of Cut, 4 Flutes, 8 mm Dia Shank, 63 mm OAL | BlackHawk Industrial Supply

Emuge 2667A.020 Multi-Cut 2667A Ball Nose End Mill, 20 mm Dia Cutter, 38 mm Max Depth of Cut, 4 Flutes, 20 mm Dia Shank, 104 mm OAL | BlackHawk Industrial Supply

Emuge 2670TZ.012030 TiNox-Cut 2670TZ Standard Length Square End Corner Radius End Mill With Axial Through Coolant, 12 mm Dia Cutter, 3 mm Corner Radius, 26 mm Max Depth of Cut, 4 Flutes, 12 mm Dia Shank, 83 mm OAL | BlackHawk Industrial Supply

Emuge 2670TZ.020025 TiNox-Cut 2670TZ Standard Length Square End Corner Radius End Mill With Axial Through Coolant, 20 mm Dia Cutter, 2.5 mm Corner Radius, 38 mm Max Depth of Cut, 4 Flutes, 20 mm Dia Shank, 104 mm OAL | BlackHawk Industrial Supply

Emuge 2673AZ.012015 Multi-Cut 2673AZ Square End Corner Radius End Mill With Axial Through Coolant, 12 mm Dia Cutter, 1.5 mm Corner Radius, 26 mm Max Depth of Cut, 4 Flutes, 12 mm Dia Shank, 83 mm OAL | BlackHawk Industrial Supply

Emuge 2676AZ.016010 Turbine Program 2676AZ Long Length Torus End Corner Radius End Mill With Axial Through Coolant, 16 mm Dia Cutter, 1 mm Corner Radius, 3 mm Max Depth of Cut, 9 Flutes, 16 mm Dia Shank, 108 mm OAL | BlackHawk Industrial Supply

Emuge 2678AZ.019010 Turbine Program 2678AZ Taper Torus Long 8 deg Corner Radius End Mill With Axial Through Coolant, 19 mm Dia Cutter, 1 mm Corner Radius, 3.5 mm Max Depth of Cut, 13 Flutes, 20 mm Dia Shank, 108 mm OAL | BlackHawk Industrial Supply

Emuge 2698A.005001 Top-Cut 2698A Square End Corner Radius End Mill, 5 mm Dia Cutter, 0.1 mm Corner Radius, 13 mm Max Depth of Cut, 4 Flutes, 6 mm Dia Shank, 57 mm OAL | BlackHawk Industrial Supply

Emuge 2698A.012002 Top-Cut 2698A Square End Corner Radius End Mill, 12 mm Dia Cutter, 0.2 mm Corner Radius, 26 mm Max Depth of Cut, 4 Flutes, 12 mm Dia Shank, 83 mm OAL | BlackHawk Industrial Supply

Emuge 2698A.014010 Top-Cut 2698A Square End Corner Radius End Mill, 14 mm Dia Cutter, 1 mm Corner Radius, 26 mm Max Depth of Cut, 4 Flutes, 14 mm Dia Shank, 83 mm OAL | BlackHawk Industrial Supply