MLF1101Features: -Materials: Fiber-5pct; foam - 10pct; fabric - 10pct; steel - 30pct; fasteners and miscellaneous - 5pct. -Magazine pocket on lower outer right-hand side of chair. Chaise pad is standard. Armrest and head covers are standard. Battery back-up system is standard. This chair features two Olin Super Quiet motors that independently operate either the back or footrest.. -Frame of the chair is all kiln dried hardwood. All stress points are kiln dried oak. All joints are glued and connected with steel fasteners. Uni-construction of seat-back assembly independently tested at a lab for strength and durability. Gang nails are used at all other critical joints or stress points. All bolts used are grade 5 (Med-Lift is the only lift chair manufacturer that uses grade 5 bolts). All bolts go entirely through the wood. No lag screws are used to secure the mechanism. Mechanism is secured by special locking T-nuts to ensure that the mechanism stays tight throughout the lifetime of the chair. All critical connection points for reclining hardware, etc. have a double locking nut, nylon aircraft grade locking nut. All wood screws used are the best and strongest available. Corner blocks are used throughout the chair at all critical points for added strength. An extra rail is used across the top of the seat back to help keep the back straight and square.. -Model features the new SoftLuxe Seat Cushion System (patent pending) with Coil Max Technology from Leggett and Platt. This system features a unique design of quality unlike any other furniture cushion fillers as it is constructed of high-densified fortified steel springs encased in fabric. This provides a long-lasting cushion with maximum comfort. SoftLuxe with Coil Max technology allows for virtually all foam to be replaced in a seat cushion with the fabric-encased Coil Max coils. Coil Max cols are wrapped with a unique dual-density, needle-punched fiber. This provides up to 21pct less breakdown than the traditional foam used in seat cushions. This model features a 7'' x 8'' x 3.5'' coil.. -Coil Max coils are precisely formed by computer control, then precompressed and inserted into premium Quantum lightweight fabric to create a soft, noise-reducing pocket round each individual coil. The automated process offers faster production time and lower costs than traditional furniture cushion filling. Each Coil Max coil flexes independently and adjusts instantly to optimize body contouring and support. The barrel-shaped coils offer initial luxurious softness, followed by firmer support that responds to applied weight. It is designed to maintain structural integrity while offering the highest support and comfort available. These fabric-encased coils are more resilient than foam, providing as much lift force when load is removed as when load is applied.. -Fiber used in the backs is a dustless, odorless, non-allergenic conjugated fiber. This is the best available in the industry. This feature makes the backs retain their original shape, giving greater comfort. The fabric used meets both CAL 117 and UFAC requirements of flammability. This is tested yearly at an independent testing lab to ensure they meet correct specifications. Extra padding is used on any portion of the wood frame that comes in direct contact with fabric. This wood frame is surrounded by an extra layer of foam or micro foam to ensure long fabric life. This extra padding makes the arms, backs, front arms, etc. feel softer and more plush. The front arm also has extra foam padding.. Upholstery Material: -Fabric. Country of Manufacture: -United States. Dimensions: -When in the reclined position the footrest is 17'' from the floor. When in the reclined position, the back of the seat to the tip of the footrest is 42''.. Overall Height - Top to Bottom: -40''. Overall Width - Side to Side: -33.5''. Overall Depth - Front to Back: -33''. Overall Product Weight: -147 lbs.
MLF1102 <br /> <b>Features</b> <br /> <ul> <li>Materials: Fiber - 5%; foam - 10%; fabric - 10%; steel - 30%; fasteners and miscellaneous - 5%</li> <li>Chaise pad is standard. Battery back-up is standard. Low volt motor standard. Fiber-filled Overstuffed Arms and backrest.</li> <li>Frame of the chair is all kiln dried hardwood. All stress points are kiln dried oak. All joints are glued and connected with steel fasteners. Uni-construction of seat-back assembly is independently lab tested for strength and durability. Gang nails are used at all other critical joints or stress points. All bolts used are grade 5 (Medlift is the only lift chair mfr. that uses grade 5 bolts). All bolts go entirely through the wood. No lag screws are used to secure mechanism. Mechanism is secured by special locking T-nuts to ensure that the mechanism stays tight through the lifetime of the chair. All critical connection points for reclining hardware, etc. have a double locking nut, nylon aircraft grade locking nut. All wood screws used are the best and strongest available. Corner blocks are used throughout the chair at all critical points for added strength. An extra rail is used across the to of the seat back to help keep the back straight and square.</li> <li>Acella-Flex foam is used for padding, which is used for better upholstered furniture. Acella-Flex foam is the closest to a perfect seating configuration in the industry. Acella-Flex basically pushes back 1 lb. for every pound of weight exerted. This characteristic makes the chairs basically sit the same for a person of 90 lbs. or a person of 300 lbs. Acella-Flex will keep 99.9% of its original shape and size, while most conventional foams will shrink 10-15% in size over the first few years. Med-Lift also uses a special break-in process before the foam is ever cut to make the foam feel good from the first use forward. As an added</li> <li>The foundation of the chair is the lift base. After testing all of the lift bases on the market today, the have determined that the Super Sagless lift base (made in the USA) is the best available. While more expensive, it will withstand constant use and abuse of a lift chair. A lift chaise base must be as wide as the base of the chair. The Super Sagless base the use s the most stable on the market today. This model features a heavy duty, low volt quiet motor, and has specially designed heavy duty reclining hardware.</li> <li>Fiber used in the backs is a dustless, odorless, non-allergenic conjugated fiber. This is the best the can find in the industry. Most competitors use a cheaper grade of fiber because of the price difference. This fiber feature makes the backs retain their original shape and gives you greater comfort.</li> <li>Upholstery Material: Fiber-5%/fabric - 10%/fasteners and miscellaneous - 5%</li> <li>Country of Manufacture: United States</li> </ul> <br /> <b>Dimensions</b> <br /> <ul> <li>Armrest When reclined, the back of the seat to the tip of the footrest measures 37.5".</li> <li>Overall Height - Top to Bottom: 46"</li> <li>Overall Width - Side to Side: 40.5"</li> <li>Overall Depth - Front to Back: 38"</li> <li>Overall Product Weight: 195 lbs</li> </ul>
MLF1118Features: -Magazine pocket on outside right-hand side of chair. Armrest and headrest covers are included at no additional charge. Battery Back-up System is standard. **Note: Battery back-up system does not work with the Ultra EZZ, 2, 4 and 6 heat/vib systems.. -The frame of the chair is all kiln dried hardwood. All stress points are kiln dried oak. All joints are glued and connected with steel fasteners. Uni-construction of seat-back assembly is independently lab tested for strength and durability. Gang nails are used at all other critical joints or stress points. All bolts used are grade 5. (We are the only lift chair mfr. that uses grade 5 bolts) All bolts go entirely through the wood. No lag screws are used to secure the mechanism. The mechanism is secured by special locking T-nuts to ensure that the mechanism stays tight throughout the lifetime of the chair. All critical connection points for reclining hardware, etc. have a double locking nut, nylon aircraft grade ocking nut. All wood screws used are the best and strongest available. Corner blocks are used throughout the chair at all critical points for added strength. An extra rail is used across the top of the seat back to help keep the back straight and square.. -Acella-Flex foam is used for padding, and this is a foam developed for use in better upholstered furniture. Acella-Flex foam is the closest to a perfect seating configuration in the industry. Acella-Flex basically pushes back 1 lb. For every pound of weight exerted. This characteristic makes the chairs basically sit the same for a person of 90 lbs. or a person of 300 lbs. Acella-Flex will keep 99.9pct of its original shape and size, while most conventional foam will shrink 10-15pct in size over the first couple of years. Med-Lift uses a special break-in process before the foam is ever cut to make the foam feel good from the first use forward. As an added benefit to our foam, we glue a layer of super soft on top of the Acella-Flex, which gives a very nice feel to the seat, but you still have the Acella-Flex base for strength and long life. This feature also makes the seat foam pressure reducing. At this time, no other life chair manufacturer uses this seating configuration or benefit.. -Seat springs used are 9 gauge Morley system no sag springs. Seat springs are tied together with tie wire to make every spring work together as a seat unit. 5 Seat springs are in this chair, and they are correctly spaced on the spring rails by a special clip rail machine. The front seat rail on the frame is larger and thicker than competitors' products, which makes the seat much stronger and durable. There is a retainer rail secured by steel brads o top of the seat springs to make sure they do not come loose. The back springs used are 12 gauge, and are also tied together with special tie wire for more comfort and endurance. To ensure that the seat springs do not cut into the bottom of the seat foam, a nova bond pad is used. The fiber used in the backs is a dustless, odorless, non-allergenic, conjugated fiber.. -The fabric used on all Med-Lift chairs meets both CAL 117 ad UFAC requirements of flammability. This is tested by an independent lab yearly to ensure correct specifications. Extra padding is used in any place on the frame that wood comes in direct contact with wood. The wood is surrounded by an extra layer of foam or micro foam to ensure long fabric life. This extra padding makes the arms, backs, front arm, etc. feel softer and more plush.. -The foundation of the chair is the lift base. We have tested all lift bases on the market today and have determined that the Super Sagless lift base (made in U.S.A.) is the best available. The lift base must be as wide as the base of the chair. The Super Sagless base we use is the most stable base in the upright lifted position on the market today. We offer a low volt quiet motor on this model.. Country of Manufacture: -United St