MONSTER TOOL/GWS Products

All products from this brand (1318 total)

5mm 4 Flute Ball Nose Single End Carbide End Mill, Bright Finish, Regular Length, 16mm Flute Length, 51mm OAL 16MM LOC,5MM SHANK,51MM OAL 30? helix, right hand spiral, right hand cut, 4 flute ball nose center cutting single end general purpose carbide end mill with plain cylindrical shank. C-2 grade sub-micron grain carbide with 10% cobalt content. Four flute design offers increased core diameter which minimizes tool deflection & improves accuracy. For profiling, slotting, production milling & finishing applications in a wide range of ferrous metals, including stainless steels & high temp alloys. Made in the USA. GWS/Monster Tool Part #223-001450

5mm 4 Flute Ball Nose Single End Carbide End Mill, TiCN Coated, Regular Length, 16mm Flute Length, 51mm OAL 16MM LOC,5MM SHANK,51MM OAL 30? helix, right hand spiral, right hand cut, 4 flute ball nose center cutting single end general purpose carbide end mill with plain cylindrical shank. C-2 grade sub-micron grain carbide with 10% cobalt content. Four flute design offers increased core diameter which minimizes tool deflection & improves accuracy. For profiling, slotting, production milling & finishing applications in a wide range of ferrous metals, including stainless steels & high temp alloys. Made in the USA. GWS/Monster Tool Part #223-001450C

5mm 4 Flute Ball Nose Single End Carbide End Mill, TiN Coated, Regular Length, 16mm Flute Length, 51mm OAL 16MM LOC,5MM SHANK,51MM OAL 30? helix, right hand spiral, right hand cut, 4 flute ball nose center cutting single end general purpose carbide end mill with plain cylindrical shank. C-2 grade sub-micron grain carbide with 10% cobalt content. Four flute design offers increased core diameter which minimizes tool deflection & improves accuracy. For profiling, slotting, production milling & finishing applications in a wide range of ferrous metals, including stainless steels & high temp alloys. Made in the USA. GWS/Monster Tool Part #223-001450A

5mm 4 Flute Square End Single End Carbide End Mill, AlTiN Coated, Regular Length, 16mm Flute Length, 51mm OAL 16MM LOC,5MM SHANK,51MM OAL 30? helix, right hand spiral, right hand cut, 4 flute square end center cutting single end general purpose carbide end mill with plain cylindrical shank. C-2 grade sub-micron grain carbide with 10% cobalt content. Four flute design offers increased core diameter which minimizes tool deflection & improves accuracy. For profiling, slotting, production milling & finishing applications in a wide range of ferrous metals, including stainless steels & high temp alloys. Made in the USA. GWS/Monster Tool Part #206-001350B

5mm 4 Flute Square End Single End Carbide End Mill, Bright Finish, Regular Length, 16mm Flute Length, 51mm OAL 16MM LOC,5MM SHANK,51MM OAL 30? helix, right hand spiral, right hand cut, 4 flute square end center cutting single end general purpose carbide end mill with plain cylindrical shank. C-2 grade sub-micron grain carbide with 10% cobalt content. Four flute design offers increased core diameter which minimizes tool deflection & improves accuracy. For profiling, slotting, production milling & finishing applications in a wide range of ferrous metals, including stainless steels & high temp alloys. Made in the USA. GWS/Monster Tool Part #206-001350

6.5MM 4XD HP CARB nACRo DRILL 26MM LOC,8MM SHK,75MM OAL APERTURE SERIES nACRo COATED MONSTER APERTURE #434-002559B Min 4 times Flute Length to Diameter Radio | With a 4-facet point & radius gash this self-centering drill provides the fastest penetration & ultimate tool longevity | nACRo Coated

6.5mm Diameter Jobber Length Carbide Twist Drill, 118? Split Point, TiN Coated, 51mm Flute, 83mm OAL 51mm Flute Length,6.5mm Shank,83mm OAL GWS/Monster jobber length twist drills are made from C-2 Sub-Micron Grain Carbide With 10% Cobalt Content. 25? helix angle quickly evacuates chips and allows for increased feed rates. 118? split point for quick penetration without walking. The most versatile overall length lends this geometry to a multitude of uses. Optional AlTiN coating can increase feed rates by 40%. Made in the USA. GWS/Monster Tool Part #450-402559A

6mm 2 Flute Square End Single End Carbide End Mill, TiN Coated, Regular Length, 19mmFlute, 63MM OAL 19MM LOC,6MM SHANK,63MM OAL 30? helix, right hand spiral, right hand cut, 2 flute square end center cutting single end general purpose solid carbide end mill with plain cylindrical shank. Made from C-2 grade sub-micron grain carbide with 10% cobalt content. 2 flute end mills allow for extra chip clearance in heavy cuts with high material removal rates. Applicable for slotting, plunging and profiling in steels, alloys, cast iron, aluminum and non-ferrous materials. Made in the USA. GWS/Monster Tool Part #204-001361A

6mm 4 Flute Ball Nose Single End Carbide End Mill, AlTiN Coated, Regular Length, 19mm Flute Length, 63mm OAL 19MM LOC,6MM SHANK,63MM OAL 30? helix, right hand spiral, right hand cut, 4 flute ball nose center cutting single end general purpose carbide end mill with plain cylindrical shank. C-2 grade sub-micron grain carbide with 10% cobalt content. Four flute design offers increased core diameter which minimizes tool deflection & improves accuracy. For profiling, slotting, production milling & finishing applications in a wide range of ferrous metals, including stainless steels & high temp alloys. Made in the USA. GWS/Monster Tool Part #223-001460B

6mm 4 Flute Ball Nose Single End Carbide End Mill, TiCN Coated, Regular Length, 19mm Flute Length, 63mm OAL 19MM LOC,6MM SHANK,63MM OAL 30? helix, right hand spiral, right hand cut, 4 flute ball nose center cutting single end general purpose carbide end mill with plain cylindrical shank. C-2 grade sub-micron grain carbide with 10% cobalt content. Four flute design offers increased core diameter which minimizes tool deflection & improves accuracy. For profiling, slotting, production milling & finishing applications in a wide range of ferrous metals, including stainless steels & high temp alloys. Made in the USA. GWS/Monster Tool Part #223-001460C

6mm Diameter x 12\

7.0mm Diameter Jobber Length Carbide Twist Drill, 118? Split Point, AlTiN Coated, 54mm Flute, 89mm OAL 54mm Flute Length,7.0mm Shank,89mm OAL GWS/Monster jobber length twist drills are made from C-2 Sub-Micron Grain Carbide With 10% Cobalt Content. 25? helix angle quickly evacuates chips and allows for increased feed rates. 118? split point for quick penetration without walking. The most versatile overall length lends this geometry to a multitude of uses. Optional AlTiN coating can increase feed rates by 40%. Made in the USA. GWS/Monster Tool Part #450-402756B

7.5mm Diameter Straight Flute Carbide JL Drill, 140? Split Point, AlTiN Coated, 38mm Flute, 70mm Long 38mm Flute Length,7.5mm Shank,70mm OAL GWS/Monster straight flute jobber length drills are made from C-2 Sub-Micron Grain Carbide With 10% Cobalt Content. Straight flute drills offer pinpoint accuracy and reamer quality finishes. The straight flute design combined with a 140? split point eases even the most difficult drilling jobs. Dual purpose: can also be used as a salvage or reclaim tool. For the most demanding applications, straight flute drills perform consistently in the harshest environments. Made in the USA. GWS/Monster Tool Part #470-402953B

7mm 4 Flute Ball Nose Single End Carbide End Mill, TiN Coated, Regular Length, 19mm Flute Length, 63mm OAL 19MM LOC,8MM SHANK,63MM OAL 30? helix, right hand spiral, right hand cut, 4 flute ball nose center cutting single end general purpose carbide end mill with plain cylindrical shank. C-2 grade sub-micron grain carbide with 10% cobalt content. Four flute design offers increased core diameter which minimizes tool deflection & improves accuracy. For profiling, slotting, production milling & finishing applications in a wide range of ferrous metals, including stainless steels & high temp alloys. Made in the USA. GWS/Monster Tool Part #223-001470A

7mm 4 Flute Square End Single End Carbide End Mill, AlTiN Coated, Regular Length, 19mm Flute Length, 63mm OAL 19MM LOC,8MM SHANK,63MM OAL 30? helix, right hand spiral, right hand cut, 4 flute square end center cutting single end general purpose carbide end mill with plain cylindrical shank. C-2 grade sub-micron grain carbide with 10% cobalt content. Four flute design offers increased core diameter which minimizes tool deflection & improves accuracy. For profiling, slotting, production milling & finishing applications in a wide range of ferrous metals, including stainless steels & high temp alloys. Made in the USA. GWS/Monster Tool Part #206-001372

8.0mm Diameter Screw Machine Stub Length Carbide Drill, 135? Split Point, Bright Finish, 41mm Flute, 72mm OAL 41mm Flute Length,8.0mm Shank,72mm OAL GWS/Monster stub drills also known as screw machine or shorty drills are made from C-2 Sub-Micron Grain Carbide With 10% Cobalt Content. A relaxed 15? helix is designed for slower feed rates found on the most demanding jobs. 135? split point possesses the strength to pierce the hardest materials. One of the few drill designs capable for use on all six ISO material categories. Optional TiN & AlTiN coating can increase feed rates by 40%. Made in the USA. GWS/Monster Tool Part #460-403150

8.0mm Diameter Straight Flute Carbide JL Drill, 140? Split Point, Bright Finish, 41mm Flute, 71mm Long 41mm Flute Length,8.0mm Shank,71mm OAL GWS/Monster straight flute jobber length drills are made from C-2 Sub-Micron Grain Carbide With 10% Cobalt Content. Straight flute drills offer pinpoint accuracy and reamer quality finishes. The straight flute design combined with a 140? split point eases even the most difficult drilling jobs. Dual purpose: can also be used as a salvage or reclaim tool. For the most demanding applications, straight flute drills perform consistently in the harshest environments. Made in the USA. GWS/Monster Tool Part #470-403150

8.5mm CARBIDE JOBBER DRILL 64mm LOC, 102mm OAL, 118?POINT RH SPIRAL RH CUT SOLID CARBIDE MONSTER #450-403346 Solid C-2 Grade Premium sub-micron grain carbide with 10% Cobalt, Right Hand Cut, 25? Right Hand Spiral, Diameter Tolerance is +0.0000/-0.0005\

8.5mm Diameter APERTURE-4XD High Performance Carbide Drill, 140? 4-Facet Point, nACRo Coated, 34mm Flute, 100mm OAL 34mm Flute Length,10mm Shank,100mm OAL GWS/Monster 2 flute Aperture-4X carbide drills are made from C-2 Sub-Micron Grain Carbide With 10% Cobalt Content. Proprietary 140? drill point technology utilizes a perfected combination of facets, corner breaks, and edge prep to produce the strongest cutting action. nACRo coating provides unrivaled lubricity and temperature reduction. 4xD perfectly blends the rigidity of 3xD and the versatility of 5xD. This self-centering drill provides the fastest penetration and ultimate tool longevity. Made in the USA. GWS/Monster Tool Part #434-003346B

8mm 2 Flute Square End Single End Carbide End Mill, Bright Finish, Regular Length, 20mmFlute, 63MM OAL 20MM LOC,8MM SHANK,63MM OAL 30? helix, right hand spiral, right hand cut, 2 flute square end center cutting single end general purpose solid carbide end mill with plain cylindrical shank. Made from C-2 grade sub-micron grain carbide with 10% cobalt content. 2 flute end mills allow for extra chip clearance in heavy cuts with high material removal rates. Applicable for slotting, plunging and profiling in steels, alloys, cast iron, aluminum and non-ferrous materials. Made in the USA. GWS/Monster Tool Part #204-001381

8mm 4 Flute Square End Single End Carbide End Mill, AlTiN Coated, Regular Length, 20mm Flute Length, 63mm OAL 20MM LOC,8MM SHANK,63MM OAL 30? helix, right hand spiral, right hand cut, 4 flute square end center cutting single end general purpose carbide end mill with plain cylindrical shank. C-2 grade sub-micron grain carbide with 10% cobalt content. Four flute design offers increased core diameter which minimizes tool deflection & improves accuracy. For profiling, slotting, production milling & finishing applications in a wide range of ferrous metals, including stainless steels & high temp alloys. Made in the USA. GWS/Monster Tool Part #206-001380B

8mm Diameter x 76mm Long Centerless Ground Carbide Rod/Blank C2 carbide offers far greater transverse rupture strength when compared to HSS. Phenomenal shock and heat resistance. Made from C-2 Sub-Micron Grain Carbide With 10% Cobalt Content for unparalleled versatility and wear resistance. Diameter Tolerance +0.0000/-0.0005\

9/16\

9/32\

9/64\

9mm 2 Flute Square End Single End Carbide End Mill, TiN Coated, Regular Length, 22mmFlute, 63MM OAL 22MM LOC,10MM SHANK,63MM OAL 30? helix, right hand spiral, right hand cut, 2 flute square end center cutting single end general purpose solid carbide end mill with plain cylindrical shank. Made from C-2 grade sub-micron grain carbide with 10% cobalt content. 2 flute end mills allow for extra chip clearance in heavy cuts with high material removal rates. Applicable for slotting, plunging and profiling in steels, alloys, cast iron, aluminum and non-ferrous materials. Made in the USA. GWS/Monster Tool Part #204-001391A

I' 4XD HP CARB nACRo DRILL 1.088\

Letter 'B' (.2380\

Letter 'C' (.2420\