Portabrace Inc Products

All products from this brand (91 total)

PortaBrace RS-NX5UB Compact HD Rain Slicker Custom Fit for Sony HDR-AX2000 and Sony HXR-NX5UThe Compact HD Rain Slicker (RS) is custom fit to each Sony camera model. Velcro-sealed flaps, clear vinyl windows and zippered openings provide maximum protection and optimum ease of operation. Special triple-layer, tricot-finished, nylon is used around the body of the camera to repel water at the case surface.Cameras with fold-out video screens are shrouded with a black fabric hood that makes viewing LCD monitors easier on sunny days.

Audio Recorder Case for Tascam DR-60D Recorder.

Camera BodyArmor for Panasonic broadcast cameras is a custom-fit, padded, protective cover made using a water-resistant, highly abrasive-resistant, soft-feel fabric. Camera BodyArmor protects your camcorder from bumps, hits and scratches. It also reduces the risk of camcorder damage due to precipitation, dust, and other harsh conditions. The back end is expandable to accommodate various sized batteries and wireless microphone combinations. All CBAs for broadcast cameras include a reversible, pull-out Rain Top that's white (reflective) on one side for shooting in the hot sun and black on the other side for cold shoots and rain. The padded interior of the CBA is lined with breathable Leno Mesh to maximize airflow between the cover and camera.The Camera Body Armor Camera Case might be thought of as a Shoulder Case with a very soft feel to it and a reversible Rain/Dust Top. The soft feel against the face is appreciated by the camera operator. The reversible top is white (reflective) on one side for hot, dry, sunny situations while the black side is useful to absorb the sun`s warmth under cold conditions. The Camera Body Armor has the same attention to details the traditional Shoulder Case enjoyed by camera owners for the past 20 years.

Camera BodyArmor for Panasonic broadcast cameras is a custom-fit, padded, protective cover made using a water-resistant, highly abrasive-resistant, soft-feel fabric. Camera BodyArmor protects your camcorder from bumps, hits and scratches. It also reduces the risk of camcorder damage due to precipitation, dust, and other harsh conditions. The back end is expandable to accommodate various sized batteries and wireless microphone combinations. All CBAs for broadcast cameras include a reversible, pull-out Rain Top that's white (reflective) on one side for shooting in the hot sun and black on the other side for cold shoots and rain. The padded interior of the CBA is lined with breathable Leno Mesh to maximize airflow between the cover and camera.The Camera body Armor might be thought of as a Shoulder Case with a very soft feel to it and a reversible Rain/Dust Top. The soft feel against the face is appreciated by the camera operator. The reversible top is white (reflective) on one side for hot, dry, sunny situations while the black side is useful to absorb the sun`s warmth under cold conditions. The Camera Body Armor has the same attention to details the traditional Shoulder Case enjoyed by camera owners for the past 20 years.

Eliminates Wasted Space! The Camera Hive uses a "Honeycomb" system of removable padded lens cups to maximize space and protection versus traditional dividers. There is no wasted divider space since the removable padded lens cups are the dividers! Remove, rearrange, or secure the lens cups in place to customize your Hive's protective interior. Lens cups can be used to support and stabilize equipment or they can be filled with lenses, flashes, light meters or other accessories. The lens cups can also be removed and worn on a belt or secured to the interiors of other Portabrace cases.Equipment Covered: Blackmagic Design Cinema Camera, Blackmagic Design Pocket Cinema, Canon DSLR Cameras, Hasselblad DSLR Cameras, Mamiya DSLR Cameras Nikon DSLR Cameras, Olympus DSLR Cameras, Panasonic DSLR Cameras, Panasonic Lumix DMC-GH4, Pentax DSLR Cameras, Samsung DSLR Cameras, Sony DSLR Cameras

In addition to interior foam, we now offer our successful new Safeguard Field Production Vault hard case line with either a soft interior Divider Kit system, or a removable Interior Soft Carrying case for Ship & Shoot convenience. Both the divider style and the interior case include our unique "nest" system of coordinated plush protective pillows

Now you can protect your DSLR camera from rain, dust and sea spray. Our new DSLR Rain Slickers use the same triple-layer nylon material with waterproof coating that our compact HD Rains Slickers do. Designed specifically for DSLR cameras,The All-New DSLR Rain Slicker has sleeves with elastic openings on either side of the case provide full access to camera controls while keeping your camera and hands dry. There's a double-layer Velcro-sealed access panel along the top of the case for attaching flashes and lights and clear vinyl windows provide easy viewing of display screens and lens points.

Our Rain Slickers are made using Cordura material with a waterproof lining. Special considerations were made for modular-camera model such as a newly designed lens cover that allows for different lenses and follow focus.

PB Hard Case models ending with the letters DKO are Divider Kit Only replacements and UP-GRADES to the foam interiors. For a more substantial solution to the foam, the DKO is used for improved performance. They include pouches, pillows and divider planks, which give you greater flexibility in configuring your ever-changing equipment requirements. DKO`s can even be used with many competing brands of shipping cases with worn out foam interiors.

Polar Mitten Camera Cases are designed to keep your camera functioning properly in cold weather. They are thickly padded with high-loft insulation material. Air-activated warmers are placed along the case interior to keep battery, recorder, lens and hands warm in extreme cold temperatures (Tested at -50 degrees Fahrenheit). The insulated lens cap protects the lens in transport and also prevents condensation from forming when bringing the camera in from the cold. Each Polar Mitten Case comes with 4 air-activated heat packs. Additional packs (PHP-2) can be ordered directly.Equipment Covered Canon XF-100 Canon XF-105 JVC GY-HM100 JVC GY-HM150 Sony HXR-NX70u

Portabrace PB-2850EP hard cases are watertight, have a pressure relief valve, easy to operate latches, and a comfortable hand grip. They are constructed with a high-performance hard-resin material reinforced at the corners. Portabrace Hard Cases are ideal for video, audio, and photographic equipment transportation and protection. They are lighter than many comparable brands and save you shipping costs.

Portabrace LongLife Interiors are now available for Pelican hard cases. This premium interior upgrade offers Pelican case owners both adjustability and unsurpassed long-life protection for their equipment. The LongLife Divider Kit has 1-inch thick padded interior walls and padded, rigid divider panels that separate and protect equipment. Bendable, padded dividers and a plush pillow system complete the interior package and help form the custom protective environment. All of the dividers attach to the case wall securely with Velcro and can be removed and attached again and again according to your current setup requirements. This configuration capability not only provides custom protection for your equipment but it saves you money over time by eliminating the need for multiple foam interiors to accommodate changing equipment setups.

PortaBrace's SC-PMW350B custom fitted shoulder case is designed to protect the camcorder from bumps, abrasions and scratches. The exterior is laminated 1000 denier Cordura nylon complemented by a soft nylon interior with a moisture-resistant foam layer between them. The case has vinyl windows so you can read the dials and a touch fastened flap that provides rapid access to the battery. Hide-away doors cover the controls and also protect them from the elements.A waterproof Rain-Top is built-in and stores in its own pocket. It covers the entire top of the camera including the lens and provides protection against rain, sleet and snow as well as corrosive atmospheres such as sea air.

Portabrace's CS-HM170 Compact HD Camera Case protects your JVC GY-HM170UA camera and organizes the essential spare battery, tape, microphones and Quick-Slick rain cover. The bottom panel is reinforced with 8mm hollow-core plastic and a layer of non-skid material, which adds an extra layer of protection against water, dirt and grime with an easy wipe-off surface.The body of the case is constructed of 1-inch thick foam and 1000-denier Cordura Nylon with a polyurethane water-resistant coating. There is half a camera cradle inside to secure the camera during transport. A comfortable non-slip shoulder strap is included.

Portabrace's SC-HPX300 custom fitted shoulder case is designed to protect the camcorder from bumps, abrasions and scratches. The exterior is laminated 1000 denier Cordura nylon complemented by a soft nylon interior with a moisture-resistant foam layer between them. The case has vinyl windows so you can read the dials and a touch fastened flap that provides rapid access to the battery. Hide-away doors cover the controls and also protect them from the elements.A waterproof Rain-Top is built-in and stores in its own pocket. It covers the entire top of the camera including the lens and provides protection against rain, sleet and snow as well as corrosive atmospheres such as sea air.

Portabrace's SC-PDW850 custom fitted shoulder case is designed to protect the camcorder from bumps, abrasions and scratches. The exterior is laminated 1000 denier Cordura nylon complemented by a soft nylon interior with a moisture-resistant foam layer between them. The case has vinyl windows so you can read the dials and a touch fastened flap that provides rapid access to the battery. Hide-away doors cover the controls and also protect them from the elements. A waterproof Rain-Top is built-in and stores in its own pocket. It covers the entire top of the camera including the lens and provides protection against rain, sleet and snow as well as corrosive atmospheres such as sea air.

Portabrace's Compact HD Camera Cases protect your Canon XC10 camera and organize the essential spare battery, tape, microphones and Quick-Slick rain cover. The bottom panel is reinforced with 8mm hollow-core plastic and a layer of non-skid material, which adds an extra layer of protection against water, dirt and grime with an easy wipe-off surface.The body of the case is constructed of 1-inch thick foam and 1000-denier Cordura Nylon with a polyurethane water-resistant coating. There is half a camera cradle inside to secure the camera during transport. A comfortable non-slip shoulder strap is included.

Portabrace's Quick Rain Slick covers (QRS) are a new hybrid, lightweight rain slicker made with Parapack nylon for protecting the body of the camera and perfect for repelling water at the camera surface, as well as a special triple layer of Tricot fabric. The QRS-XA20 is custom fitted to the Canon XA20 camera and is designed to be put on and removed easily and quickly.A clear, vinyl window helps you see critical controls as well as the LCD screen while shooting in the rain, dust and snowy weather. You will have easy access to battery, recording medium and all important controls and accessories. You can use it on a tripod or while shoulder mounted. Portabrace even provides openings to allow for their new HB-12DV CAM shoulder strap option.

Protect your Rotolight Anova or Anova 2 LED floodlight with the Portabrace RS-RTANOV Rain Slicker protective cover. Keep the light shining bright and protect your Anova from rain and dust. The RS-RTANOV is constructed of waterproof nylon Taslan, which has a 1500MM waterproof rating. Taslan has a patented "breathable" design that allows heat from the light to escape to prevent overheating. A large, clear vinyl window allows the light to shine through unobstructed. Velcro-sealed access panels keep a tight, form-fitting seal around the light while also allowing for easy access to lighting controls.

Rain Slickers (RS) for JVC cameras are a customized way to protect your JVC camera from rain, dust and snow. The Rain Slicker exterior layer is made from Nylon Taslan material and complemented by a soft tricot interior that won't scratch your equipment. The Taslan material is both waterproof (1000MM waterproof rating) and breathable (1000G/M² breathability rating), which keeps the camera dry while also preventing the camera from overheating. The Rain Slickers have extra material that can be extended for additional protection. A clear Vinyl window provides an unobstructed view of the controls and a quick-change rear panel gives you easy access to the battery compartment. The detachable front visor keeps rain off the lens. A triple-zippered bottom makes tripod mounting easy. JVC Rain Slickers can also be used on the shoulder or hand-held.

The AR-MIXPRE6 Audio Recorder Case from Portabrace is a lightweight and durable field carrying solution that is custom-fit to carry and protect the Sound Devices Mix-Pre 6 field recorder setup. The case exterior is made from durable, abrasion-resistant 1000-denier Cordura nylon. The case body is lined with a layer of foam padding to help absorb shocks and protect form bumps and scratches.Side openings provide complete access to cable input / outputs and memory card slots. The openings seal tight with hook and loop fastener to provide maximum protection against water, dust and debris. The AR-MIXPRE6 also comes with a clear Vinyl cover that can be easily attached to allow an unobstructed view of the recorder's screen while protecting the Mix-Pre 6 from rain or splashing.There is a wireless transmitter pocket on each side of the case and molle strips along the front of the case to allow for more transmitters to be clipped (4 total).

The CAR-3CAMS Cargo Case Camera Edition in our Signature Blue color has an ultra-light design, featuring dual-rigidity foam for maximum equipment protection. It is designed to fit Pro Video Cameras up to 21.75" long and works best for with cameras including the HM600, PMW200, AC160, HPX250, XF100, XF305, C300, and Blackmagic Cinema Camera. This rugged case is constructed using long-life materials including 1000-denier Cordura nylon and solid steel clip rings. Reversed zippers and a slipknot anti-skid waterproof bottom panel are used for increased water-resistancy and durability.Arrive at your venue in Shoot Ready format knowing everything you need is packed, organized and accessible. The 9" interior height allows for shoot-ready equipment configurations and the easy-open, quick-draw design means you'll never miss the shot. There are front and back slip pockets for carrying SD cards, documents, cords, and white balance cards. The 2 side pockets are perfect for batteries, extra flashes, and cords.The interior of the case is made using a copper-colored Veltex that contrasts against camera and lenses for clear visibility of the case contents. There's also an interior light system for improved visibility when shooting in low-light environments. Completely customize your interior setup using the positionable interior divider system, including 1 horizontal divider, 1 hanging mic pocket, 1 padded divider pouch, 1 padded 7" lens cup / storage pouch, camera tie-down, and divider camera "cradle". Comfortable genuine suede shoulder strap and handles are included.Equipment Covered: Blackmagic Design Cinema Camera, Blackmagic Design URSA Mini Canon DSLR Cameras, Canon XA10, Canon XA20, Canon XA25, Canon XF100, Canon XF105 Canon XF200, Canon XF205, Canon XF300, Canon XF305, Hasselblad DSLR Cameras, Ikonoskop A-Cam dll, JVC GY-HM150 JVC GY-HM600, JVC GY-HM650, JVC GY-HMQ10, JVC GY-HMZ1U, JVC GY-LS300, Mamiya DSLR Cameras, Nikon DSLR Cameras Olympus DSLR Cameras, Panasonic AG-3DA1, Panasonic AG-AC130, Panasonic AG-AC160, Panasonic AG-AC7, Panasonic AG-AC90, Panasonic AG-DVX200 Panasonic AG-HMC150, Panasonic AG-HMC40, Panasonic AG-HPX170, Panasonic AG-HPX171, Panasonic AG-HPX250, Panasonic AG-HPX255, Panasonic AG-HVX200 Panasonic AJ-PX270, Panasonic DSLR Cameras, Panasonic HC-X1000, Panasonic HDC-SDT750, Panasonic HDC-Z10000, Pentax DSLR Cameras, Samsung DSLR Cameras Sony DSLR Cameras,Sony FDR-AX1, Sony HDR-AX2000, Sony HDR-FX7, Sony HVR-A1U, Sony HVR-Z5U, Sony HVR-Z7U Sony HXR-NX3/1, Sony HXR-NX30, Sony HXR-NX5, Sony HXR-NX70, Sony NEX-FS100, Sony NEX-FS700, Sony NEX-VG10 Sony NEX-VG20, Sony PMW-100, Sony PMW-150, Sony PMW-160, Sony PMW-200, Sony PMW-EX1, Sony PMW200 Sony PXW-X160, Sony PXW-X180, Sony PXW-X200, Sony PXW-X70, Sony PXW-Z100, Sony PXW-Z150

The CBA-HM600 Camera Body Armor Camera Case is custom fit to your JVC HM600 camera while accommodating popular accessories and after market add-ons such as wireless microphones, batteries, fire store units, shot gun microphones and more lights. All the important functions are accessible through the padded Camera Armor Body. Use it on or off the tripod.

The CBA-PX5000B Camera Body Armor for the Panasonic AJ-PX5000 Camcorder is a custom-fit, padded, protective cover made using a water-resistant, highly abrasive-resistant, soft-feel fabric. Camera Body Armor protects your Panasonic AJ-PX5000 camcorder from bumps, hits, and scratches. It also reduces the risk of camcorder damage due to precipitation and dust. The back end is expandable to accommodate batteries and wireless microphones.The CBA-PX5000B Camera Body Armor features pull-out rain top which can be folded up and stored in a built-in pocket on the side of the CBA. The padded interior of the Camera Body Armor is lined with breathable leno mesh to maximize airflow between the cover and the camera.

The CBA-PX800B Camera BodyArmor is a custom-fit cover that provides padded full-time protection for the Panasonic AJ-PX800 broadcast camera. The protective cover made using a water-resistant, highly abrasion-resistant, soft-feel 500-denier Cordura nylon material. Camera BodyArmor is designed to extend the life of your camera by protecting the camcorder from bumps, hits and scratches. It also reduces the risk of camcorder damage due to precipitation, dust, and other harsh conditions. The padded interior of the CBA is lined with breathable Leno Mesh to maximize airflow between the cover and camera.The back end of the cover is expandable to accommodate various sized batteries and wireless microphone combinations. All CBAs for broadcast cameras include a reversible, pull-out Rain Top that's white (reflective) on one side for shooting in the hot sun and black on the other side for cold shoots and rain.

The CH-OSMO Camera Holster from Portabrace is the perfect "run-and-gun" field solution for filming with the DJI Osmo. The holster is constructed of durable, abrasion-resistant 1000-denier Cordura Nylon, which is used to make some of the toughest military tactical gear. Our Cordura is treated with an extra layer of water-resistant coating for maximum protection against water and debris. It is also cold-crack tested at -40°F for 4 hours.There is a long zipper down the front of the holster that can be zipped up to provide a tighter grip around the Osmo. The zipper is reverse-sewn to extend the life of the zipping mechanism and to further prevent debris from entering the main compartment of the holster. Unzipping the zipper allows for easier removal or insertion of the Osmo unit. A cover folds down over the Osmo while the camera is in the holster. The cover securely connects to the holster body with Velcro when in the closed position. The cover helps keep the Osmo securely in place in the holster and is also an effective layer of protection from water and dust.A thick Nylon-webbing belt is included for mounting the holster on. The belt has a strong plastic clip and adjusts to fit most waist sizes. The belt has four D-ring clips ideal for hanging Portabrace Cable Binders (CB-810), small belt pouches, or other accessories.

The CS-DV2UQS-M2, the smallest MINI-DV CAMERA CASE with quick Slick Mini rain cover protects and organizes the camera and the essential spare battery, tape, microphones and rain cover. The bottom panel is reinforced with hollow core plastic, foam layers and a NEW layer of Slip-Not fabric, which adds an extra layer of protection against water, dirt and grime with an easy wipe-off surface. 1"? thick foam, 1000 denier Cordura Nylon with a generous coating of polyurethane waterproofing provides long lasting protection. The cradle inside is adjustable and stays where YOU put it to keep the camera from shifting. Also included: One small, padded pouch, a shoulder strap and a white balance card. One large exterior pocket holds, Rain Cover, Cables, and a wide slip pocket for white balance card, owner's manual, maps airline tickets, etc.Equipment Covered: Canon VIXIA Canon XA10 JVC GY-HM100 JVC GY-HMZ1U Panasonic AG-HMC40 Sony HDR-HC1 Sony HDR-SR5 Sony HXR-NX70 SonyNEX-VG30EH

The CS-DV4RQS-M3 MINI-DV CAMERA CASE with Quick Slick Mini rain cover protects and organizes the camera and the essential spare battery, tape, microphones and rain cover. The bottom panel is reinforced with hollow core plastic, foam layers and a NEW layer of Slip-Not fabric, which adds an extra layer of protection against water, dirt and grime with an easy wipe-off surface. Featuring one inch thick foam and 1000 denier Cordura Nylon with a generous coating of polyurethane waterproofing which provides long lasting protection. The cradle inside is adjustable and stays where YOU put it to keep the camera from shifting. Also included: One small, padded pouch, a suede shoulder strap and a white balance card. One large exterior pocket holds, Rain Cover, Cables, and a wide slip pocket for white balance card, owners manual, maps, airline tickets, etc.Equipment Covered: Canon XA10, Canon XA20, Canon XA25, Canon XF100, Canon XF105, Canon XF300, Canon XF305 JVC GY-HM150, JVC GY-HM600, JVC GY-HM650, JVC GY-HMZ1U Panasonic AG-3DA1, Panasonic AG-AC130, Panasonic AG-AC160, Panasonic AG-AC90 Panasonic AG-HMC150, Panasonic AG-HMC40, Panasonic AG-HPX250, Panasonic AG-HPX255, Panasonic AJ-PX270, Panasonic HC-X1000, Panasonic HDC-Z10000 Sony NEX-FS100, Sony PMW-100, Sony PMW-150, Sony PMW-160, Sony PMW-200, Sony PXW-Z100, Sony PXW-Z150

The DVO-C3500 is specifically designed to hold Canon EOS C-Series cameras and accessories. It is made from 1000 denier Cordura fabric with a new, slip-resistant, easy-clean rubber bottom. It fits a Canon C100, C300 or C500 camera with add-on items such as shoe-mount viewfinder, handle and extra lens. It has a camera tie-down strap, padded bendable divider, and a soft lens cup to keep the camera and accessories stable.The DVO-C3500 is stackable and has a hollow-core, lightweight, rigid frame. A suede shoulder strap and white balance card are also included.

The LC-35X5 from Portabrace is very popular for most small handheld cameras (fits lens shades 3 1/2"? x 5"? approx). The lens caps feature a quick-connect buckle and tether to keep them securely fastened to your camera, bag, or belt-loop. The exterior of the Lens Cap is made using waterproof Nylon Taslan material that keeps out unwanted rain, splashes, or dust and debris. The elastic opening provides a secure grip around the lens shade.There is a built-in White Balance Card that provides both structure to the Lens Cap and a convenient focal point for white-balancing. There is also a small interior pocket that can be used for carrying lens-cleaning tissue or as a convenient business card holder.

The LR-4GLCCB Glidecam Carrying Case from Portabrace is a rigid framed, heavy-duty case that is designed for worry-free transport of your Glidecam stabilizer system. This case has 2 heavily padded dividers as well as a BK-ZC stuff sack. The Veltex-lined interior keeps your Glidecam safe while running to shoots across town or even when you throw the case in the trunk of your car.

The AR-DR44WL is a custom-fit protective carrying case for the Tascam DR44WL audio recorder. The case provides both protection for the recorder as well as an improved field-recording experience by allowing the recorder to securely hang from a shoulder strap or clip to your belt for quick-access. Easy access to the mic, controls, and cable input/outputs are provided by the case's custom-fit design.The case's outer layer is constructed of durable, 1000-denier Cordura Nylon material, which provides reliable protection against bumps and scratches. The interior of the case is lined with soft mesh fabric to prevent scratching on the recorder's surface and also to improve air-flow around the equipment during use.There's a belt-loop for securely attaching the recorder to your belt. We recommend combining the AR-DR44WL with the Portabrace HB-15 Shoulder Strap (sold separately) for additional comfort and accessability.

The AR-DR701D Recorder Case is designed to custom fit the Tascam DR701D or the Tascam DR70D recorder for use with wireless mics. Featuring flaps, clear vinyl windows, and protective coverings, this mixer case provides access to cable openings, batteries, dials, and switches. The mixer case is also padded to protect your mixer and accessories. The AR-DR701D includes the main mixer compartment and a comfortable shoulder strap.Equipment Covered: Tascam DR-70D, Tascam DR-701D

The ATV-BAT is a battery pouch that easily attaches and detaches to the Portabrace ATV-Z8 Audio Tactical Vest and AR-Z8 Recorder Case. You can quickly add this to your case or quickly remove it if you don't need it. This case is made using padded 1000- denier Cordura nylon.

The Audio Organizer (AO) is a 1000-denier Cordura nylon case with a rigid plastic frame and interior padding in the main section and pocket. It is designed to carry a mixer, wireless microphones, transmitters, batteries, cables, connectors, and other equipment. The AO-688H comes with a durable audio harness.Zip-off side panels provide access for cables. The case is completely reversible so the mixer can be positioned anywhere and the hinged top can be removed and positioned front to back. it moves the entry either closer or further away. The case has cable ports on each side so cables can be routed into all exterior pockets for snag free wiring versatility.The Audio Organizer has a receiver/transmitter pocket on each side of the case, a microphone power supply pocket, and a padded main outside pocket, which is sewn in to prevent sagging. There is a layer of anti-skid, waterproof Slip-Not material on the bottom of the case. An audio harness is included in this case to help distribute the weight in a comfortable way.The AO-688H is designed specifically to fit the Sound Devices 688 with or without the CL6.Equipment Covered:Sound Devices 688, Sound Devices 688/CL6.

The Audio Organizer (AO) is a 1000-denier Cordura nylon case with a rigid plastic frame and interior padding in the main section and pocket. It is designed to carry a mixer, wireless microphones, transmitters, batteries, cables, connectors, and other equipment. Zip-off side panels provide access for cables. The case is completely reversible so the mixer can be positioned anywhere and the hinged top can be removed and positioned front to back. it moves the entry either closer or further away. The case has cable ports on each side so cables can be routed into all exterior pockets for snag free wiring versatility.The Audio Organizer has a receiver/transmitter pocket on each side of the case, a microphone power supply pocket, and a padded main outside pocket, which is sewn in to prevent sagging. There is a layer of anti-skid, waterproof Slip-Not material on the bottom of the case. A comfortable suede leather shoulder strap is included for carryng the case over the shoulder or around the neck. The case can also be used with an optional Portabrace Audio Harness. The AO-4WT/664 is wider and taller than the standard AO-4, designed specifically to fit the Sound Devices 664 with or without the CL6.

The BK-2AUD has a lightweight, padded rigid frame and a comfortable strap system with thick padding and breathable mesh lining to maximize air-flow.The case has a padded pocket that will hold a 17" laptop computer and 2 accessory pockets perfect for spare batteries and cables. It includes a 6" x 9" padded accessory pouch, a set of 6" Piggin' Strings, and a strong rigid divder for extra support of heavy audio equipment. The backpack has extra foam padding and non-slip material on the shoulder, removable waist straps, and padded side support straps. A LI-GLW illumination strip light pocket is included.

The BK-3BLC Modular Backpack - Local Version (Black) is designed for lightweight local use when carrying a camcorder with accessories. It includes a BK-P2M removable front double pocket and ergonomic backpack straps. Features include a protective rigid inner frame and zipper covers for wear spots on corners. There are modular pocket options available such as: a BK-LPM modular option for a laptop computer; a BK-RBM removable belt pouch made to hold accessories such as filters, matte boxes, or back-up batteries; and a BK-TQM tripod quiver module.The BK-3BLC modular backpack straps adjust to carry the pack horizontally or vertically in order to best adapt to equipment loads. It also has a lightweight rigid frame for maximum protection of the case contents.Equipment Covered: Canon XA10, Canon XA20, Canon XA25, Canon XF100, Canon XF105, Canon XF200, Canon XF205 JVC GY-HM150,JVC GY-HM600, JVC GY-HM650,JVC GY-HMQ10,JVC GY-HMZ1U Panasonic AG-3DA1,Panasonic AG-AC130,Panasonic AG-AC160,Panasonic AG-AC90,Panasonic AG-HMC150, Panasonic AG-HMC40 Panasonic AG-HPX170,Panasonic AG-HPX171, Panasonic AG-HPX250, Panasonic AG-HPX255, Panasonic AG-HVX200, Panasonic HDC-Z10000 Sony HDR-AX2000, Sony HDR-FX7, Sony HVR-A1U, Sony HVR-Z5U, Sony HVR-Z7U, Sony HXR-NX3/1, Sony HXR-NX30 Sony HXR-NX5,Sony HXR-NX70, Sony PMW-100, Sony PMW-160, Sony PMW-EX1, Sony PMW200, Sony PXW-X70

The blue CBA-PXWX500 Camera Body Armor is a jacket designed to fit the Sony PXW-X500 Camcorder. It is made of a soft-feel, water and abrasion-resistant fabric that protects your camera from bumps, hits, and scratches, also reducing the risk of damage due to precipitation, dust, and other harsh conditions. The flaps and vinyl windows keep dirt and moisture out, but allow quick visual checks on important meters, indicator lights, and switches. The back end of the jacket is expandable to accommodate various sizes of batteries and wireless microphone combinations. The Camera Body Armor includes a reversible rain top cover; one side of it is white to reflect light and heat in hot, dry, sunny situations, while the other one is black to absorb the sun's warmth under cold conditions. The Camera Body Armor is fastened onto the camera using touch fasteners and web cinches.

The Camera BodyArmor EX1 Camera Case fits the Sony PMW-EX1 beautifully and includes a simple RAIN/DUST cover in a convenient slip pocket. All the important functions are accessible through the padded Armor Body. Use it on or off the tripod. Check out the promotional video to learn more and to see our Camera BodyArmor in action.The Camera BodyArmor Camera Case might be thought of as a Shoulder Case with a very soft feel to it and a reversible Rain/Dust Top. The soft feel against the face is appreciated by the camera operator. The reversible top is white (reflective) on one side for hot, dry, sunny situations while the black side is useful to absorb the sun`s warmth under cold conditions. The Camera BodyArmor has the same attention to details the traditional Shoulder Case enjoyed by camera owners for the past 20 years.

The Cargo Case Camera Edition has an ultra-light design, featuring dual-rigidity foam for maximum equipment protection. The CAR-3CAMT has been designed to add extra height to this case to accomodate your equipment needs in a better manner. It is designed to fit Pro Video Cameras up to 21.75" long and works best for with cameras including the HM600, PMW200, AC160, HPX250, XF100, XF305, C300, and Blackmagic Cinema Camera. This rugged case is constructed using long-life materials including 1000-denier Cordurar nylon and solid steel clip rings. Reversed zippers and a slip-not anti-skid waterproof bottom panel are used for increased water-resistancy and durability. Arrive at your venue in Shoot Ready format knowing everything you need is packed, organized and accessible. The 9" interior height allows for shoot-ready equipment configurations and the easy-open, quick-draw design means you'll never miss the shot. There are front and back slip pockets for carrying SD cards, documents, cords, and white balance cards. The 2 side pockets are perfect for batteries, extra flashes, and cords.The interior of the case is made using a copper-colored Veltex that contrasts against camera and lenses for clear visibility of the case contents. Completely customize your interior setup using the positionable interior divider system, including 1 horizontal divider, 1 hanging mic pocket, 1 padded divider pouch, camera tie-down, and divider camera "cradle".Comfortable genuine suede shoulder strap and handles are included.Works with the following equipment: Blackmagic Design Cinema Camera; Blackmagic Design URSA Mini Canon DSLR Cameras; Canon XA10; Canon XA20; Canon XA25; Canon XF100; Canon XF105; Canon XF200; Canon XF205; Canon XF300; Canon XF305 Hasselblad DSLR Cameras; Ikonoskop A-Cam dll; Mamiya DSLR Cameras; Nikon DSLR Cameras; Olympus DSLR Cameras Pentax DSLR Cameras; Samsung DSLR Cameras JVC GY-HM150; JVC GY-HM600; JVC GY-HM650; JVC GY-HMQ10; JVC GY-HMZ1U; JVC GY-LS300 Panasonic AG-3DA1; Panasonic AG-AC130; Panasonic AG-AC160; Panasonic AG-AC7; Panasonic AG-AC90; Panasonic AG-DVX200; Panasonic AG-HMC150; Panasonic AG-HMC40; Panasonic AG-HPX170; Panasonic AG-HPX171; Panasonic AG-HPX250; Panasonic AG-HPX255; Panasonic AG-HVX200; Panasonic AJ-PX270; Panasonic DSLR Cameras; Panasonic HC-X1000; Panasonic HDC-SDT750; Panasonic HDC-Z10000 Sony DSLR Cameras; Sony FDR-AX1; Sony HDR-AX2000; Sony HDR-FX7 Sony HVR-A1U; Sony HVR-Z5U; Sony HVR-Z7U; Sony HXR-NX3/1; Sony HXR-NX30; Sony HXR-NX5; Sony HXR-NX70; Sony NEX-FS100; Sony NEX-FS700; Sony NEX-VG10; Sony NEX-VG20; Sony PMW-100; Sony PMW-150; Sony PMW-160; Sony PMW-200; Sony PMW-EX1; Sony PMW200; Sony PXW-X160; Sony PXW-X180; Sony PXW-X200; Sony PXW-X70; Sony PXW-Z100

The CLK-OB/SEC offers complete weather protection for stadium cameras. The cover is made from waterproof Nylon Taslan material and complemented by a soft Tricot interior layer that protects the camera from rain and dust. In addition to being waterproof (1000MM waterproof rating) the Taslan material is breathable (1000G/MA² breathability rating), allowing heat from the camera to escape while the cover is deployed. Long sleeves help keep you dry and three (3) hand-warmer pockets in each sleeve maintain warmth to keep your arms and hands working the camera at cold, outdoor events. Lots of zippers in all the right places make putting the Cloak on and taking it off easy to do, but still provide maximum protection. Nylon pull-ties cinch at all openings to help secure the Cloak around the camera and keep out unwanted rain, dust and other airborne particles. A clear vinyl window at the front of the Cloak allows the tally light to shine through.

The Compact HD Rain Slicker (RS) is custom fit to the Sony PXW160 camera model. Velcro-sealed flaps, clear vinyl windows and zippered openings provide maximum protection and optimum ease of operation. Special triple-layer, tricot-finished, nylon is used around the body of the camera to repel water at the case surface. Cameras with fold-out video screens are shrouded with a black fabric hood that makes viewing LCD monitors easier on sunny days. Be sure to check the Equipment Covered tab to select the Rain Slicker for your camera.

The Digital Video Organizer is the ideal case to keep your camera and accessories organized with over 19 pockets and assorted pouches. The case has a rigid-frame that provides an extra level of protection and comes with dividers to split up the interior of the case to keep your tapes and batteries separate from your camera. Multiple cases are easily stackable while staging gear. This case comes with 19 pockets; one exterior large mesh pocket, one exterior large zipper pocket, one exterior large slip pocket, inside large zipper pocket contains 8 slip pockets, two side pockets with 2 mesh pockets, interior pocket and the lid contains 2 zippered mesh pockets. This case comes with a Shoulder Strap, CS-B9 Pouch, PB-B9 Pouch, (2) 5x2.75 Bendable Dividers, (1) 5x9 Bendable Dividers, (1) 5x9 Ridged Divider, Camera Cradle, Camera Tie Down Cinch Strap, Positionable Padded Foam Base and White Balance Card and a QS-M2 mini quick slick.

The DVO-1 fits popular compact HD and miniDV cameras with a minimum amount of add-on items (no matte box, no wireless mics, etc.) A camera tie-down strap and cradle keeps the camera stable. A plush, 1" thick foam pad adds extra stability and protection to the base of your camera. You also receive a detachable 15" microphone pocket, White Balance Card, CS-B9 pouch, PB-B6 pouch and shoulder strap. The DVO-1 has a ridged shell and is stackable for multi-camera shoots or for staging a pile of gear more conveniently. The case is made from a super durable 1000-denier Cordura fabric with a new slip-resistant easy-clean rubber bottom.

The Flat Screen Field Monitor Case (MO) is made using 1000-denier Cordurar material and is custom-fit to the Plura PBM-310-3G field monitor. There's a fold-out anti-glare visor that improves screen visibility while using the montior outdoors. A "Quick-Slick" rain cover is included and can be used to keep the monitor, battery and cables dry during an unexpected rain shower. A sturdy stand folds out to angle the monitor for optimal viewing. The bottom of the case is lined with anti-skid, waterproof material to provide a solid protective base.The stand and visor fold back into the case and the entire unit folds into a protective compact case for carrying over the shoulder. A comfortable suede-leather HB-1040 Shoulder Strap is included and can also be used around the neck to support the monitor while viewing.

The HIP-2GP offerS a quick-access protective carrying solution for GoPro Cameras and accessories. Keep your GoPro Hero close at hand during transport or anytime you're not shooting. The hip-packs can be comfortably worn in the front (belly) position or back (fanny) position.The case is constructed using 1000-denier Cordura fabric and has a semi-rigid, padded frame that provides maximum protection. The interior of the main compartment is lined with soft Veltex, which provides soft protection for the camera and unlimited positioning of the divider (included). Each hip-pack comes with a divider for organizing and protecting your GoPro camera and accessories. There are extra pockets for cords and additional small accessories. The hip-packs have a wide, quick-release waist belt made of durable nylon.

The HIP-4LENS offers a quick-access protective carrying solution for spare lenses. Stay Shoot-Ready by keeping your lenses close at hand while shooting. The hip-packs can be comfortably worn in the front (belly) position or back (fanny) position.The main compartment is constructed using 1000-denier Cordura fabric and has a semi-rigid, padded frame that provides maximum protection. Each hip-pack comes with padded dividers for organizing and protecting lenses. The Veltex-lined interior allows you to adjust and remove dividers depending on your current lens carrying needs. There is a pocket on the front, a zippered "shelf-pocket" on the top, three front slip pockets, and side pockets for additional small accessories. The hip-packs have a wide, quick-release waist belt made of durable nylon. The HIP-4LENS is an extra-large size pack capable of holding up to 4 lenses.

The HIP-OSMO Hip Pack is a convenient and secure way to carry your DJI Osmo and other accessories. The main compartment has a semi-rigid frame for maximum protection. The case exterior is made using durable abrasion-resistant 1000-denier Cordura material and the interior has a layer of foam padding with a soft Veltex lining.There is a large top pocket that can also fit the Osmo if you want to use the main compartment for additional items. There is also an accessory pocket on the front of the pack. The hip pack has an extra wide adjustable waist belt that helps comfortably support the Osmo and accessories.There is a slip-pocket in the waist belt that is ideal for cash or business cards.

The Large Wheeled Grip Bag, GRIP-3BOR from Portabrace, is a durable, rolling bag made weather-resistant military-grade 1000d Cordura fabric and water-proofed nylon-bonded triple-tacked stitching for superior water-resistance in a wide range of unpredictable field production conditions/The GRIP-3BOR is designed to carry all sorts of grip and electrical gear such as:Grip clamps and clips Electrical cables, meters, and power distribution C-Stands, booms, and jibs Camera rig equipment Light heads and lighting accessories Gloves Tape, tools and small toolboxes or cratesThe GRIP-3BOR has smooth-rolling, off-road wheels with ball-bearings and solid steel axels for added strength. The wheels are also removable to help prevent damage during air-travel. The interior main compartment and the large front pocket are padded for extra protection. There are exterior pockets that will hold AC cords, cables, gel rolls and reflectors.A padded interior divider kit is included that can be positioned to create three separate compartments or a single large compartment. There are suede leather handles for carrying, a comfortable suede leather shoulder strap is included for carrying over the shoulders and LED carabiner light for production in low-light conditions.

The MINI-DV CAMERA CASE with Quick Slick Mini rain cover protects and organizes the camera and the essential spare battery, tape, microphones and rain cover. The bottom panel is reinforced with hollow core plastic, foam layers and a NEW layer of Slip Not fabric, which adds an extra layer of protection against water, dirt and grime with an easy wipe-off surface. 1" thick foam, 1000 denier Cordura Nylon with a generous coating of polyurethane waterproofing provides long lasting protection. The cradle inside is adjustable and stays where YOU put it to keep the camera from shifting. Also included: One small, padded pouch, a suede shoulder strap and a white balance card. One large exterior pocket holds, Rain Cover, Cables, and a wide slip pocket for white balance card, owner's manual, maps airline tickets, etc.

The PB-26LENS is a rigid-frame, padded Cordura case that comes with a padded divider system designed specifically for protecting and transporting camera lenses. The case has a lightweight, rigid frame that is surrounded with thick padding. The case exterior is made of durable, water-resistant 1000-denier Cordura and the interior has a soft Veltex lining that cushions lenses and also attaches to the Velcro-based dividers at any point of contact. This allows you to fully customize your interior according to your current equipment needs. The Divider Kit comes with ten (10) 4-inch padded dividers and one (1) 15-inch padded divider. The dividers are copper-colored for improved visibility of lenses inside the case. The PB-26LENS fits inside the Portabrace PB-2600E hard case (sold separately) for convenient added protection during air-travel or for shipping.

The PB-2750IC Wheeled Hard Case has a removable soft interior case and divider kit inside the soft case. You can shed the weight of the Hard Case after shipping and work out of the soft case. Inside the soft case is the divider kit and an assortment of pouches and pillows, adding a high degree of protection in a compact, well organized manner, saving you shipping costs over the life of the case. Portabrace hard cases have a pressure relief valve, easy to operate latches, and a comfortable hand grip. They are constructed with a high-performance hard-resin material reinforced at the corners and including a TSA lock. These hard cases are ideal for video, audio, and photographic equipment transportation and protection. Limited Lifetime Warranty.

The Porta Brace RS-SHAPEFS7 Rain Slicker is a custom cover designed to protect your Sony PXW-FS7 and Shape extension arm from rain, dust, and snow. It is made from triple-layer, tricot-finished nylon, with touch fastener flaps and zippered openings provided for additional protection. It features clear vinyl windows so you can view all camera controls and a quick change battery back for swapping batteries without having to remove the rain slicker.

The Portabace WPC-1ORAUD Wheeled Production Case is made for transporting all kinds of audio equipment. The cases are designed to be used for handling gear on location as well as transporting apparatus to the job site. They are constructed of a strong ridged interior frame covered with 1000 denier Cordura nylon fabric, with padded protection all around.The WPC-1ORAUD has off-road inline skate wheels with strong steel axles for improved stability and traction. A retractable telescoping steel handle is mounted on top for portability.Case BasicsLightweight production case for heavy loads for studio, audio, video and film equipment Divider kit is provided which allows customizing of an infinite number of storage compartments.Equipment Covered: Cooper Sound CS-104, Professional Sound Alpha Professional Sound M3, Shure FP24, Shure FP32A, Shure FP33, Sony DMX-P01 Sound Devices 302, Sound Devices 442, Sound Devices 552, Sound Devices 633 with XLB2 Batteries, Sound Devices 702 Sound Devices 722, Sound Devices 744, Sound Devices 788, Sound Devices 788/CL8, SQN Electronics SQN-2 SQN Electronics SQN-3, SQN Electronics SQN-4 (II & III), SQN Electronics SQN-5, Zaxcom Maxx with right angle XLRs, Zaxcom Nomad

The Portabrace CO-AB-MB+ Carry-On is a soft-sided carrying case for shoulder-mount cameras with an interior pillowing system that provides superior cushioned-protection for the camera. 2 large exterior pockets and 1 interior slip-pocket are perfect for storing accessories, white-balance cards, and your optional Portabrace Rain Slicker. Colored tabs on pocket flaps help identify contents for convenience. 2 exterior mesh slip-pockets hold tickets, maps and passport. There's also a seat-belt retainer strap to stabilize your equipment on the road.All Carry-On Cases include heavy-duty suede shoulder straps and comfortable suede hand-grips. Carry-On cases are constructed of 1000-denier Cordura® nylon fabric and have anti-skid, water-resistant bases.+ Edition has extra-strength reinforced protective viewfinder section.

The PortaBrace RS-PTZOPTICS30X is a custom fit rain cover for PTZ Optics cameras. The rain cover is easy to deploy and is constructed using waterproof Nylon material. The cover grips tightly around the lens area of the camera with a neoprene-lined cuff. The unique design allows the camera to swivel while maintaining the water-resistance of the cover.

The Portabrace LB-1B Lens Bag Carrying Case cushions your EF, EF-S, Prime, DSLR, High Definition, ENG/EFP style lens in this compact, lightweight case with a tough frame, plenty of padding and room for extras. The lens-mounted Vocas matte box fits well, too. This case is extremely durable, waterproof, and made from 1000-denier Cordura nylon fabric on the exterior. There is also a slip pocket (14-1/2" W x 5-1/2" H) for French flag or other flat objects.

The Portabrace MO-APOLLO Rain & Dust cover provides custom-fit protection for the Apollo monitor during field-use. The cover can be used while the monitor is mounted to a camera or camera rig. The cover is constructed using waterproof Nylon Taslan, which also has a patented "breathable" design that both prevents water from getting in and allows heat from the monitor to escape to prevent overheating.Velcro-sealed access panels secure tightly around cables. A large, Velcro-sealed bottom opening makes it easy to slide the MO-APOLLO on or off.There's a fold-out anti-glare visor that improves screen visibility when filming outdoors or on bright sets. The visor folds down and seals shut with Velcro when the monitor's not in use, providing extra protection for the screen during transport. HB-15 Shoulder Strap sold separately.

The Portabrace MO-LH1850 carrying case and viewing stand is custom fit to the Panasonic BT-LH1850 monitor. The body of the case is made of durable, abrasion-resistant, Cordura material. There is soft padding and a semi-rigid frame for extra protection during transport. Interior nylon and Velcro straps secure the monitor within the custom-fit frame. Carry the case using the soft suede handles or comfortable (HB-10) suede shoulder strap.There is a deep, fold-out, anti-glare visor that improves screen visibility by keeping out unwanted sun or set-light. The visor is covered in a soft Nylon material that protects the monitor screen when folded down. The sturdy, fold-out viewing stand lets you adjust the screen angle for improved viewing. The stand is made of strong and lightweight hollow-core plastic that provides stable support for the monitor.

The Portabrace MXC-42AB Audio Mixer Combination Cases are protective carrying cases custom-fit to each audio mixer. This Combination Case includes a large removable RM-MULTI Wireless Receiver pouch and also a strong, thick, padded suede strap. The RM-MULTI's main compartment comes with padded dividers to comfortably and securely house multiple receivers. The pouch also features a convenient smaller front compartment for additional extras. On both the left and right exterior of the pouch there are attachment points for the users hop sends or IFB transmitter. The main mixer compartment of the MXC allows for easy access to all audio input/outputs and also external controls. The optional addition of the AH-2 audio harness/belt is recommended for use with this MXC bag. The simple but strong harness upgrade provides additional stability and optimum weight distribution.

The Portabrace PB-1600DKO Premium Interior Upgrade Divider Kit for a Pelican 1600 Case is a complete divider system that replaces the 4-piece foam set in the Pelican 1600 case. The kit is made up of 1" thick padded walls that cushion your gear against bumps. Included with this kit are four 5.0 x 3.0" padded dividers, two 7.0 x 21" padded dividers, two padded accessory pouches, a protective pillow for extra protection against the inevitable bumps and abrasions that cases are subjected toand one TSA lock. The dividers attach to the walls of your optional Pelican case via convenient touch fasteners that can be repositioned at will to accommodate whatever configuration of gear you need on a given day. The advantage of this kit is that it saves you the expense of having to buy individual foam interiors to accommodate your various gear set ups.

The Portabrace PB-1620ICO Interior Case is designed to replace the foam interior of a Pelican 1620 series case. PB Hard Case models ending with "ICO" are Interior Case Only replacements and is an upgrade from foam interiors. When the foam wears out, use the ICO to improve useability and performance. This upgrade includes pouches, pillows and divider planks that give you greater flexibility in configuring your ever-changing equipment requirements. ICO's can even be used with many competing brands of shipping cases with worn out foam interiors.

The Portabrace PB-24LENS73 Hard Case is ideal for carrying DSLR or other small equipment and accessories. The case is watertight and airtight. It has a pressure relief valve, easy to operate latches, and a comfortable hand grip.The case shell is constructed of a high-performance, hard-resin material reinforced at the corners. The patented resin material compound is lighter than many comparable brands, which makes your gear more comfortable to carry and also saves on shipping costs.Certifications -ATA (Air Transport Association) 300 rated -IP67 Military specification for protection against dust and against the effect of immersion between 15cm and 1.0 m -STANAG 4280 is a NATO specification for high and low temperatures for extended periods of time (up to 131° Fahrenheit for 48 hours and as low as -4.0° Fahrenheit for 16 hours) -DS 81-41 (military-grade)

The Portabrace PB-2500E Hard Case is a watertight, high-performance hard resin case for video, audio, and photographic equipment transportation and protection. It is watertight and airtight with a pressure relief valve, easy to operate latches, and a comfortable hand grip. The patented resin material is lighter than many comparable brands, which helps reduce fatigue and shipping costs.The PB-2500E is constructed with a high-performance hard-resin material reinforced at the corners. The PB-2500E is ideal for audio, and photographic equipment.Please note: This case has an empty interior. See PB-2500F model for cubed foam interior.Equipment Covered Canon XA10 Canon XA20 Canon XA25 Canon XF100 Canon XF105

The Portabrace PB-2750BKF from Portabrace is a complete protective transporting system that combines the flexibility and convenient-use of a soft-case backpack with the protection and wheeled capability of wheeled hard case.The interior backpack is made of durable, abrasion-resistant Cordura material and is black. The inside has a cubed foam interior that allows you to customize the the interior setup to your specific equipment needs. The case size is recommended for drones (such as the Phantom Vision 2 Quadcopter), DSLR camera and multiple lenses, and small compact HD camera setups. The backpack straps have thick padding and a "breathable" mesh lining for comfortable carrying of heavy loads. The straps conveniently fold up into the back of the case when inserting the backpack into the hard case shell.The included PB-2750E Hard Case is constructed of a high-performance, hard-resin material reinforced at the corners and is blue. The case is airtight and watertight, has a pressure relief valve, easy to operate latches, and a comfortable hand grip. There is a retractable aluminum handle and smooth-rolling wheels. Portabrace Hard Cases are ultra lightweight and durable.

The Portabrace PB-2850FORX Hard Case has a cubed-foam interior, durable aluminum rail and a comfortable pullout hand grip. It is constructed with a high-performance hard-resin material, reinforced at the corners. Wheeled Hard Cases are smooth rolling, have a pressure relief valve and have easy to operate latches. Wheeled hard cases are also ideal for transporting and protecting video, audio, and photographic equipment.Please note: the PB-2850FORX is not a watertight / airtight case due to the process of adding the custom off-road wheels and axle. The case does not lose any protective strength or integrity but it will allow air to the main storage area.

The Portabrace POL-HM600 Polar Mitten Camera Case is designed to keep your JVC camera functioning properly in cold weather. The case is thickly padded with high-loft insulation material. Air-activated warmers are placed along the case interior to keep battery, recorder, lens and hands warm in extreme cold temperatures (tested to -50°F). The insulated lens cap protects the lens in transport and also prevents condensation from forming when bringing the camera in from the cold. Each Polar Mitten Case comes with 4 air-activated heat packs.

The Portabrace PR-C2LED is a padded protective case for carrying LED lights. The case is constructed using abrasion-resistant 1000-denier Cordura nylon material. The material is also treated with a layer of water-resistant protection. There is half in. foam padding throughout to protect the LED light during transport. The case has a single, durable YKK zipper that unzips to allow the case to open flat for easy access to the light. Interior Velcro tie-down straps help secure the light inside the case for extra protection. There are strong, solid-steel rings for clipping to the comfortable, non-slip shoulder strap (included). The PR-C2LED can also be carried using the suede-covered nylon handles.

The Portabrace QSA-4 Quick Slick Audio Cover fits the larger Portabrace mixer/recorder combination cases. The cover works with or without the optional audio harness or strap. This rain cover is also designed to function with any other brand mixer bag of a similar size. Note: This is the rain cover only. Audio organizer and suede strap not included.Equipment Covered: Portabrace AO-2X, Portabrace AR-7, Portabrace AR-DR680, Portabrace AR-HDP2, Portabrace AR-PMD660 Portabrace AR-R44, Portabrace MX-24, Portabrace MX-302MINI, Portabrace MX-M3 Portabrace MX-SQ2, Portabrace MXC-302, Shure FP32A, Shure FP33 Sound Devices 302, Sound Devices 702, Sound Devices 722, Sound Devices 744

The Portabrace RIG-C100IIC Camera Case with interior kit is designed to carry a C100 Mark II camera and accessories or rig setup assembled or with minimal disassembly of the rig components. Ideal for mid-size rigs or the C100 Mark II and a full set of lenses, this large and extremely flexible case is durable and complete with accessory items that will assure your gear is held safely and comfortably in place.Arrive at your venue in Shoot-Ready format knowing everything you need is packed, organized and accessible. The case is made from rugged 1000-denier Cordura and features 1 in. thick padding surrounding a hollow-core plastic frame. The bottom is bolstered by a layer of waterproof rubber to assist with ground protection. It's carried by two top suede leather carry handles or removable suede leather shoulder strap.The main compartment is accessed via strong YKK zippers and a secure Velcro strip along the front flap. The compartment is empty and can be configured to meet your needs using Portabrace's included 7 x 13 in. divider, Camera Tie-down Cinch and Camcorder Stuff Sack. The case also comes with two padded lens cups and a handy white balance card. Two large accessory side pockets are accompanied by a front slip pocket for various accessories.

The Portabrace RIG-MINI has an ultra-light design, featuring dual-rigidity foam for maximum equipment protection. It is designed to fit the Blackmagic URSA Mini. This rugged case is constructed using long-life materials including 1000-denier Cordura nylon and solid steel clip rings. Reversed zippers and a slipknot anti-skid waterproof bottom panel are used for increased water-resistancy and durability. The off-road wheels roll smoothly over almost any surface. The wheel system includes strong steel axles, solid rubber wheels, and ball bearings.Arrive at your venue in Shoot-Ready format knowing everything you need is packed, organized and accessible. The 9 in. interior height allows for shoot-ready equipment configurations and the easy-open, quick-draw design means you'll never miss the shot. There are front and back slip pockets for carrying SD cards, documents, cords, and white balance cards. The 2 side pockets are perfect for batteries, extra flashes, and cords.

The Portabrace RS-PMW300 Rain Slicker is a custom cover designed to protect your Sony PMW-300 from rain, dust, and snow. It is made from waterproof nylon Taslan material and complemented by a soft Tricot interior layer that protects the camera and reduces noise during operation. In addition to being waterproof (1000MM waterproof rating) the Taslan material is breathable (1000G/M² breathability rating), allowing heat from the camera to escape while the cover is deployed.Clear vinyl windows are used to provide unobstructed visibility of camera controls. Velcro-sealed openings are carefully placed to provide full access to controls and power supply without allowing water to seep in. The anti-skid rubber lens gasket creates a tight seal around around the camera lens.

The Portabrace RS-RECOILFS5 Rain Slicker is a custom cover designed to protect your Sony PXW-FS5 and Zacuto Recoil from rain, dust, and snow. It is made from triple-layer, tricot-finished nylon, with touch fastener flaps and zippered openings provided for additional protection. It features clear vinyl windows so you can view all camera controls and a quick change battery back for swapping batteries without having to remove the rain slicker.

The Portabrace SLD-41XT DSLR Camera Slider Case is made of 1000-denier Cordura nylon and has a padded interior. It is designed to carry sliders up to 41 inches in length as well as a tripod plate and slider accessories. It has a wide mouth opening for easy access to the equipment. The case has interior reinforcing bars to keep it rigid. Most sliders can remain assembled within the case allowing for quick set-up and use.There are exterior pockets for carrying plates, cables and accessories. Inside the case there's tie-down strap to keep the slider in place during transit. There's also a rigid-foam padded bottom and anti-skid waterproof bottom panel for added protection. There's an HB-1040, padded, suede leather shoulder strap for carrying the case over your shoulder. The SLD-41XT also comes with suede leather covered carrying handles and suede leather covered haul handles on the sides.

The Portabrace SLD-46XTOR DSLR Camera Slider Case is made of 1000-denier Cordura nylon and has a padded interior. It is designed to carry sliders up to 46 inches in length as well as a tripod plate and slider accessories. It has a wide mouth opening for easy access to the equipment. Most sliders can remain assembled within the case allowing for quick set-up and use.There are exterior pockets for carrying plates, cables and accessories. Inside the case there's tie-down strap to keep the slider in place during transit. There's also a rigid-foam padded bottom and anti-skid waterproof bottom panel for added protection. There's an HB-1040 padded, suede leather shoulder strap for carrying the case over your shoulder. The SLD-46XTOR also comes with suede leather covered carrying handles and suede leather covered haul handles on the sides. The off-road wheels roll smoothly over almost any surface and are removable to prevent axle damage when shipping or during air-travel.

The Portabrace TSC-4 telescope case has zipper facing to keep even more water out should you forget and leave the case out in the rain. The main compartment is foam padded with a padded rigid bottom. Two dividers span the 7 in. width with a 12 in. divider in between (with zippered slip pocket), providing a useful array of subdivisions. Fold them out of the way for one large compartment. A shoulder strap is included. Designed specifically for Meade Telescopes.

The PortaBrace AO series organizer is a large, self contained case made for audio field mixers and recorders. The larger dimensions of the bag offer plenty of storage options and also ample room for multiple receivers. The main structure of this Portabrace bag is made from hard plastic paneling covered in durable padded Cordura fabric, this combination of materials create a strong and ridged frame that offers great protection to the users equipment. Any extra equipment can be stored in the large front pocket of the case. Both sides of the AO series bag are fully detachable side panels that allow easy access to all mixer inputs and outputs. Located on both exterior sides of the bag are transmitter hop pouches and also one large zip able flask holder. This bag is the perfect solution for large multiple receiver situations.Some recommended setups for the AO-2XH: Sound Devices 788-CL8: With room for 4 dual Wireless Receivers.2 transmitter sends and NP1/BDS system pockets. Sound Devices 664: With room for 8 wireless Receivers.2 transmitter sends and NP1/BDS system pockets. Zaxcom Nomad: Withroom for 6 wireless receivers, 2 transmitter sends and NP1/BDS system pockets. Zaxcom Diva:Withroom for 4 wireless receivers, 2 transmitter sends and NP1/BDS system pockets.

The Portabrace ATV is the first of its kind. The innovative vest combines both an audio harness and audio bag in to one cohesive military-style tactical vest. Its lightweight and streamlined design provides the user with unparalleled stability. The vest grips the body, providing great support and weight distribution. This allows the user to move much more rapidly and freely whilst in the field.The Portabrace ATV-688 is also compatible with the Sound Devices 688. The use of this powerful mixer combined with a dual wireless system creates a lightweight and compact rig capable of recording multiple tracks on the run. This tactical vest is the perfect option for any ENG or fast-paced reality and documentary mixer.Equipment Covered: Sound Devices 688

The Portabrace Inc. RS-URSABCENG is a protect your shoulder-mount / ENG-style camera from rain and dust with the Rain Slicker camera cover. Rain Slickers are made from waterproof Nylon Taslan material and complemented by a soft Tricot interior layer that protects the camera and reduces noise during operation. In addition to being waterproof (1000MM waterproof rating) the Taslan material is breathable (1000G/MÂ² breathability rating), allowing heat from the camera to escape while the cover is deployed. Clear Vinyl windows are used to provide unobstructed visibility of camera controls. Velcro-sealed openings are carefully placed to provide full access to controls and power supply without allowing water to seep in. The adjustable neoprene lens gasket creates a tight seal around the lens and an included detachable visor adds extra protection against droplets reaching the glass.

The Portabrace Lens Belt allows you to keep your lenses (or other accessories) close at hand. The strong nylon belt has a large clip that allows you to pull the belt tight to fully support the weight of the lenses. There are 4 d-ring clips to attach cables using Portabrace Piggin' Strings (sold separately) or to clip the belt to a Portabrace DSLR Harness for added support (HR-DSLR sold separately).The Lens Belt comes with 2 Lens Cups: one 4-inch and one 7-inch. Each Lens Cup has it's own color-coded tab and clear vinyl viewing window for quickly identifying your lenses. The Lens Cups are padded and have a semi-rigid core wrapped in soft nylon to protect your lenses while you're on the move.

The RIG-2SRK Camera Case with interior kit is designed to carry camera rigs fully assembled or with minimal disassembly of the rig components. Ideal for mid-size rigs like the Zacuto Fee-NG or Redrock Micro ultraCage, this large and extremely flexible case is durable and complete with accessory items that will assure your gear is held safely and comfortably in place.Arrive at your venue in Shoot ReadyT format knowing everything you need is packed, organized and accessible. The case is made from rugged 1000-denier Cordura and features 1" thick padding surrounding a hollow-core plastic frame. The bottom is bolstered by a layer of waterproof rubber to assist with ground protection. It's carried by its two top suede leather carry handles or removable suede leather shoulder strap.The main compartment is accessed via strong YKK zippers and a secure Velcro strip along the front flap. The compartment is empty and can be configured to meet your needs using Porta Brace's included 7 x 13" divider, Camera Tie-down Cinch and Camera Support Block (foam block). The case also comes with two padded lens cups and a handy white balance card. Two large accessory side pockets are accompanied by a front slip pocket for various accessories.Cameras and Equipment not included.

The RIG-FS7 is an ultra-light carrying case featuring dual-rigidity foam for maximum equipment protection. This rugged case is constructed using long-life materials including 1000-denier Cordura nylon and solid steel clip rings. Reversed zippers and a slip-not anti-skid waterproof bottom panel are used for increased water-resistancy and durability. The 9" interior height allows for a variety of equipment configurations and the easy-open, quick-draw design means you'll never miss the shot. There are front and back slip pockets for carrying SD cards, documents, cords, and white balance cards. The 2 side pockets are perfect for batteries, extra flashes, and cords.The interior of the case is made using a copper-colored Veltex that contrasts against camera and lenses for clear visibility of the case contents. Completely customize your interior setup using the positionable interior divider system, including 1 horizontal divider, 1 padded divider pouch, 1 padded 7-inch lens cup / storage pouch, 1 padded 4-inch lens cup / storage pouch, camera tie-down, and divider camera cradle.Comfortable non-slip shoulder strap and handles are included.

The RS-22OVF Rain Slicker is specifically designed for cameras with mounted wireless video transmitters. The cover is longer and taller and has an expandable back end for various batteries and wireless transmitter setups.This camera rain cover is made from waterproof Nylon Taslan material and complemented by a soft Tricot interior layer that protects the camera and reduces noise during operation. In addition to being waterproof (1000MM waterproof rating) the Taslan material is breathable (1000G/M² breathability rating), allowing heat from the camera to escape while the cover is deployed.Clear Vinyl windows are used to provide unobstructed visibility of camera controls. Velcro-sealed openings are carefully placed to provide full access to controls and power supply without allowing water to seep in. The adjustable neoprene lens gasket creates a tight seal around the lens and an included detachable visor adds extra protection against droplets reaching the glass.

The TRAVELER CAMERA CASE is specially designed to carry the new generation of small digital cameras like the Canon XL-1, JVC-GY-HD100U and the Sony DSR-200. It features full padded protection for the camera and extra protection for delicate view finders. The armored plastic view finder protector is a typically innovative and attractive Porta-Bracer solution. This version of the CTC-2 comes with a mini Quick-slick for on-the-go protection against rain and dust. Suede shoulder strap and white balance card are included. Note: our cases are designed to securely fit your camera, some battery and lens packages may require a different case. Please contact your local dealer or Porta-Brace directly to ensure proper fit.

This durable air brush kit bag is ideal for the professional makeup artist. There are suede leather handles and a shoulder strap for comfortable carrying. The case frame is made of rigid, hollow-core plastic the provides maximum protection while remaining lightweight. 3/8" soft padding and a padded divider protect makeup and airbrush inside the case.There are loops and cinches for attaching to the Portabrace WCC-1ORPRO Cosmetics Case. A comfortable suede shoulder strap is included.