ULTRA TOOL/TOOL ALLIANCE Products

All products from this brand (412 total)

.25mm 2 Flute Square End High Hardness Carbide End Mill, 1.2mm LOC, 3mm Shank, 38mm OAL, D1 - PVD Diamond Coated 1.2mm LOC,3mm Shank,38mm OAL GR Series: D1 PVD Diamond coated high strength, high hardness solid carbide end mills for graphite & abrasive materials featuring proprietary coating for medium to long-run setups. Designed for graphite and abrasive non-metals. Proprietary cemented carbide grade, application specific geometry and D1 PVD diamond coating. Hard, thin and smooth D1 for extremely sharp cutting edge. Superior abrasion resistance for superb price / performance valuation. Extremely close diameter tolerances. Round Tool Laboratories USA Part #10579

.60mm 2 Flute Square End High Hardness Carbide End Mill, 3mm LOC, 3mm Shank, 38mm OAL, D1 - PVD Diamond Coated 3mm LOC,3mm Shank,38mm OAL GR Series: D1 PVD Diamond coated high strength, high hardness solid carbide end mills for graphite & abrasive materials featuring proprietary coating for medium to long-run setups. Designed for graphite and abrasive non-metals. Proprietary cemented carbide grade, application specific geometry and D1 PVD diamond coating. Hard, thin and smooth D1 for extremely sharp cutting edge. Superior abrasion resistance for superb price / performance valuation. Extremely close diameter tolerances. Round Tool Laboratories USA Part #10583

.70mm 2 Flute Square End High Hardness Carbide End Mill, 3.5mm LOC, 3mm Shank, 38mm OAL, D1 - PVD Diamond Coated 3.5mm LOC,3mm Shank,38mm OAL GR Series: D1 PVD Diamond coated high strength, high hardness solid carbide end mills for graphite & abrasive materials featuring proprietary coating for medium to long-run setups. Designed for graphite and abrasive non-metals. Proprietary cemented carbide grade, application specific geometry and D1 PVD diamond coating. Hard, thin and smooth D1 for extremely sharp cutting edge. Superior abrasion resistance for superb price / performance valuation. Extremely close diameter tolerances. Round Tool Laboratories USA Part #10584

.80mm 4 Flute Ball Nose High Hardness Carbide End Mill, 4mm LOC, 3mm Shank, 38mm OAL, AlTiN Coated w/SE1 Edge Prep 4mm LOC,3mm Shank,38mm OAL GR Series: AT coated with SmoothEdge Prep, Thick core, high strength, high hardness solid carbide end mills with increased helix. Designed for milling of die & hardened steels & other hard metals. Tight diameter tolerance. Proprietary cemented carbide grade offers extremely high hardness and density. Strengthened cutting edges & reduced break-in with SmoothEdge SE1 for diameters less than 1/8\

0.10mm 2FL Square 1.5XD Multi-Purpose Micro Carbide End Mill, .15mm LOC, 3mm Shank, 38mm OAL, AT - AlTiN Coated .15mm LOC,3mm Shank,38mm OAL MP Series: Multi-Purpose decimal micro end mills 1.5 x diameter length of cut. Premium carbide substrate with advanced geometry for diverse application range. Use uncoated for general purpose materials. Use AT in cobalt chrome, steels, stainless, high-temp alloys, and more. Use D1 PVD Diamond in graphites, aluminum silicon alloys, carbon fiber composites, reinforced plastics, & more. Round Tool Laboratories USA Part #40801AT

0.15mm 2FL Square 1.5XD Multi-Purpose Micro Carbide End Mill, .23mm LOC, 3mm Shank, 38mm OAL, D1 - PVD Diamond Coated .23mm LOC,3mm Shank,38mm OAL MP Series: Multi-Purpose decimal micro end mills 1.5 x diameter length of cut. Premium carbide substrate with advanced geometry for diverse application range. Use uncoated for general purpose materials. Use AT in cobalt chrome, steels, stainless, high-temp alloys, and more. Use D1 PVD Diamond in graphites, aluminum silicon alloys, carbon fiber composites, reinforced plastics, & more. Round Tool Laboratories USA Part #40802D1

0.20mm 2FL Square 3XD Multi-Purpose Micro Carbide End Mill, .60mm LOC, 3mm Shank, 38mm OAL, D1 - PVD Diamond Coated .60mm LOC,3mm Shank,38mm OAL MPL Series: Multi-Purpose decimal micro end mills 3 x diameter length of cut. Premium carbide substrate with advanced geometry for diverse application range. Use uncoated for general purpose materials. Use AT in cobalt chrome, steels, stainless, high-temp alloys, and more. Use D1 PVD Diamond in graphites, aluminum silicon alloys, carbon fiber composites, reinforced plastics, & more. Round Tool Laboratories USA Part #40815D1

0.25mm (0.0098\

0.25mm 2FL Square 1.5XD Multi-Purpose Micro Carbide End Mill, .38mm LOC, 3mm Shank, 38mm OAL, AT - AlTiN Coated .38mm LOC,3mm Shank,38mm OAL MP Series: Multi-Purpose decimal micro end mills 1.5 x diameter length of cut. Premium carbide substrate with advanced geometry for diverse application range. Use uncoated for general purpose materials. Use AT in cobalt chrome, steels, stainless, high-temp alloys, and more. Use D1 PVD Diamond in graphites, aluminum silicon alloys, carbon fiber composites, reinforced plastics, & more. Round Tool Laboratories USA Part #43272AT

0.30mm 2FL Square 1.5XD Multi-Purpose Micro Carbide End Mill, .45mm LOC, 3mm Shank, 38mm OAL, D1 - PVD Diamond Coated .45mm LOC,3mm Shank,38mm OAL MP Series: Multi-Purpose decimal micro end mills 1.5 x diameter length of cut. Premium carbide substrate with advanced geometry for diverse application range. Use uncoated for general purpose materials. Use AT in cobalt chrome, steels, stainless, high-temp alloys, and more. Use D1 PVD Diamond in graphites, aluminum silicon alloys, carbon fiber composites, reinforced plastics, & more. Round Tool Laboratories USA Part #43273D1

0.35mm 2FL Ball 3XD Multi-Purpose Micro Carbide End Mill, 1.05mm LOC, 3mm Shank, 38mm OAL, D1 - PVD Diamond Coated 1.05mm LOC,3mm Shank,38mm OAL MPL Series: Multi-Purpose decimal micro end mills 3 x diameter length of cut. Premium carbide substrate with advanced geometry for diverse application range. Use uncoated for general purpose materials. Use AT in cobalt chrome, steels, stainless, high-temp alloys, and more. Use D1 PVD Diamond in graphites, aluminum silicon alloys, carbon fiber composites, reinforced plastics, & more. Round Tool Laboratories USA Part #40141D1

0.40mm (0.0157\

0.40mm 2FL Ball 1.5XD Multi-Purpose Micro Carbide End Mill, .60mm LOC, 3mm Shank, 38mm OAL, D1 - PVD Diamond Coated .60mm LOC,3mm Shank,38mm OAL MP Series: Multi-Purpose decimal micro end mills 1.5 x diameter length of cut. Premium carbide substrate with advanced geometry for diverse application range. Use uncoated for general purpose materials. Use AT in cobalt chrome, steels, stainless, high-temp alloys, and more. Use D1 PVD Diamond in graphites, aluminum silicon alloys, carbon fiber composites, reinforced plastics, & more. Round Tool Laboratories USA Part #43375D1

0.40mm 2FL Square 3XD Multi-Purpose Micro Carbide End Mill, 1.20mm LOC, 3mm Shank, 38mm OAL, AT - AlTiN Coated 1.20mm LOC,3mm Shank,38mm OAL MPL Series: Multi-Purpose decimal micro end mills 3 x diameter length of cut. Premium carbide substrate with advanced geometry for diverse application range. Use uncoated for general purpose materials. Use AT in cobalt chrome, steels, stainless, high-temp alloys, and more. Use D1 PVD Diamond in graphites, aluminum silicon alloys, carbon fiber composites, reinforced plastics, & more. Round Tool Laboratories USA Part #40116AT

0.45mm (0.0177\

0.45mm (0.0177\

0.45mm 2FL Square 1.5XD Multi-Purpose Micro Carbide End Mill, .68mm LOC, 3mm Shank, 38mm OAL, D1 - PVD Diamond Coated .68mm LOC,3mm Shank,38mm OAL MP Series: Multi-Purpose decimal micro end mills 1.5 x diameter length of cut. Premium carbide substrate with advanced geometry for diverse application range. Use uncoated for general purpose materials. Use AT in cobalt chrome, steels, stainless, high-temp alloys, and more. Use D1 PVD Diamond in graphites, aluminum silicon alloys, carbon fiber composites, reinforced plastics, & more. Round Tool Laboratories USA Part #43276D1

0.45mm 2FL Square 3XD Multi-Purpose Micro Carbide End Mill, 1.35mm LOC, 3mm Shank, 38mm OAL, D1 - PVD Diamond Coated 1.35mm LOC,3mm Shank,38mm OAL MPL Series: Multi-Purpose decimal micro end mills 3 x diameter length of cut. Premium carbide substrate with advanced geometry for diverse application range. Use uncoated for general purpose materials. Use AT in cobalt chrome, steels, stainless, high-temp alloys, and more. Use D1 PVD Diamond in graphites, aluminum silicon alloys, carbon fiber composites, reinforced plastics, & more. Round Tool Laboratories USA Part #40117D1

0.45mm 4FL Square 1.5XD Multi-Purpose Micro Carbide End Mill, .68mm LOC, 3mm Shank, 38mm OAL, AT - AlTiN Coated .68mm LOC,3mm Shank,38mm OAL MP Series: Multi-Purpose decimal micro end mills 1.5 x diameter length of cut. Premium carbide substrate with advanced geometry for diverse application range. Use uncoated for general purpose materials. Use AT in cobalt chrome, steels, stainless, high-temp alloys, and more. Use D1 PVD Diamond in graphites, aluminum silicon alloys, carbon fiber composites, reinforced plastics, & more. Round Tool Laboratories USA Part #40808AT

0.50mm (0.0197\

0.55mm (0.0217\

0.55mm 2FL Ball 1.5XD Multi-Purpose Micro Carbide End Mill, .83mm LOC, 3mm Shank, 38mm OAL, D1 - PVD Diamond Coated .83mm LOC,3mm Shank,38mm OAL MP Series: Multi-Purpose decimal micro end mills 1.5 x diameter length of cut. Premium carbide substrate with advanced geometry for diverse application range. Use uncoated for general purpose materials. Use AT in cobalt chrome, steels, stainless, high-temp alloys, and more. Use D1 PVD Diamond in graphites, aluminum silicon alloys, carbon fiber composites, reinforced plastics, & more. Round Tool Laboratories USA Part #43378D1

0.55mm 4FL Square 1.5XD Multi-Purpose Micro Carbide End Mill, .83mm LOC, 3mm Shank, 38mm OAL, D1 - PVD Diamond Coated .83mm LOC,3mm Shank,38mm OAL MP Series: Multi-Purpose decimal micro end mills 1.5 x diameter length of cut. Premium carbide substrate with advanced geometry for diverse application range. Use uncoated for general purpose materials. Use AT in cobalt chrome, steels, stainless, high-temp alloys, and more. Use D1 PVD Diamond in graphites, aluminum silicon alloys, carbon fiber composites, reinforced plastics, & more. Round Tool Laboratories USA Part #40810D1

0.55mm 4FL Square 3XD Multi-Purpose Micro Carbide End Mill, 1.65mm LOC, 3mm Shank, 38mm OAL, D1 - PVD Diamond Coated 1.65mm LOC,3mm Shank,38mm OAL MPL Series: Multi-Purpose decimal micro end mills 3 x diameter length of cut. Premium carbide substrate with advanced geometry for diverse application range. Use uncoated for general purpose materials. Use AT in cobalt chrome, steels, stainless, high-temp alloys, and more. Use D1 PVD Diamond in graphites, aluminum silicon alloys, carbon fiber composites, reinforced plastics, & more. Round Tool Laboratories USA Part #40822D1

0.60mm 2FL Ball 3XD Multi-Purpose Micro Carbide End Mill, 1.80mm LOC, 3mm Shank, 38mm OAL, AT - AlTiN Coated 1.80mm LOC,3mm Shank,38mm OAL MPL Series: Multi-Purpose decimal micro end mills 3 x diameter length of cut. Premium carbide substrate with advanced geometry for diverse application range. Use uncoated for general purpose materials. Use AT in cobalt chrome, steels, stainless, high-temp alloys, and more. Use D1 PVD Diamond in graphites, aluminum silicon alloys, carbon fiber composites, reinforced plastics, & more. Round Tool Laboratories USA Part #40146AT

0.65mm (0.0256\

0.65mm 4FL Ball 1.5XD Multi-Purpose Micro Carbide End Mill, .98mm LOC, 3mm Shank, 38mm OAL, D1 - PVD Diamond Coated .98mm LOC,3mm Shank,38mm OAL MP Series: Multi-Purpose decimal micro end mills 1.5 x diameter length of cut. Premium carbide substrate with advanced geometry for diverse application range. Use uncoated for general purpose materials. Use AT in cobalt chrome, steels, stainless, high-temp alloys, and more. Use D1 PVD Diamond in graphites, aluminum silicon alloys, carbon fiber composites, reinforced plastics, & more. Round Tool Laboratories USA Part #40912D1

0.70mm 2FL Ball 3XD Multi-Purpose Micro Carbide End Mill, 2.10mm LOC, 3mm Shank, 38mm OAL, AT - AlTiN Coated 2.10mm LOC,3mm Shank,38mm OAL MPL Series: Multi-Purpose decimal micro end mills 3 x diameter length of cut. Premium carbide substrate with advanced geometry for diverse application range. Use uncoated for general purpose materials. Use AT in cobalt chrome, steels, stainless, high-temp alloys, and more. Use D1 PVD Diamond in graphites, aluminum silicon alloys, carbon fiber composites, reinforced plastics, & more. Round Tool Laboratories USA Part #40148AT

0.75mm 4FL Ball 3XD Multi-Purpose Micro Carbide End Mill, 2.25mm LOC, 3mm Shank, 38mm OAL, D1 - PVD Diamond Coated 2.25mm LOC,3mm Shank,38mm OAL MPL Series: Multi-Purpose decimal micro end mills 3 x diameter length of cut. Premium carbide substrate with advanced geometry for diverse application range. Use uncoated for general purpose materials. Use AT in cobalt chrome, steels, stainless, high-temp alloys, and more. Use D1 PVD Diamond in graphites, aluminum silicon alloys, carbon fiber composites, reinforced plastics, & more. Round Tool Laboratories USA Part #40183D1

0.80mm 2FL Ball 1.5XD Multi-Purpose Micro Carbide End Mill, 1.20mm LOC, 3mm Shank, 38mm OAL, AT - AlTiN Coated 1.20mm LOC,3mm Shank,38mm OAL MP Series: Multi-Purpose decimal micro end mills 1.5 x diameter length of cut. Premium carbide substrate with advanced geometry for diverse application range. Use uncoated for general purpose materials. Use AT in cobalt chrome, steels, stainless, high-temp alloys, and more. Use D1 PVD Diamond in graphites, aluminum silicon alloys, carbon fiber composites, reinforced plastics, & more. Round Tool Laboratories USA Part #43383AT

0.80mm 2FL Square 1.5XD Multi-Purpose Micro Carbide End Mill, 1.20mm LOC, 3mm Shank, 38mm OAL, AT - AlTiN Coated 1.20mm LOC,3mm Shank,38mm OAL MP Series: Multi-Purpose decimal micro end mills 1.5 x diameter length of cut. Premium carbide substrate with advanced geometry for diverse application range. Use uncoated for general purpose materials. Use AT in cobalt chrome, steels, stainless, high-temp alloys, and more. Use D1 PVD Diamond in graphites, aluminum silicon alloys, carbon fiber composites, reinforced plastics, & more. Round Tool Laboratories USA Part #43283AT

0.80mm 2FL Square 1.5XD Multi-Purpose Micro Carbide End Mill, 1.20mm LOC, 3mm Shank, 38mm OAL, D1 - PVD Diamond Coated 1.20mm LOC,3mm Shank,38mm OAL MP Series: Multi-Purpose decimal micro end mills 1.5 x diameter length of cut. Premium carbide substrate with advanced geometry for diverse application range. Use uncoated for general purpose materials. Use AT in cobalt chrome, steels, stainless, high-temp alloys, and more. Use D1 PVD Diamond in graphites, aluminum silicon alloys, carbon fiber composites, reinforced plastics, & more. Round Tool Laboratories USA Part #43283D1

0.85mm (0.0335\

0.90mm 4FL Square 1.5XD Multi-Purpose Micro Carbide End Mill, 1.35mm LOC, 3mm Shank, 38mm OAL, AT - AlTiN Coated 1.35mm LOC,3mm Shank,38mm OAL MP Series: Multi-Purpose decimal micro end mills 1.5 x diameter length of cut. Premium carbide substrate with advanced geometry for diverse application range. Use uncoated for general purpose materials. Use AT in cobalt chrome, steels, stainless, high-temp alloys, and more. Use D1 PVD Diamond in graphites, aluminum silicon alloys, carbon fiber composites, reinforced plastics, & more. Round Tool Laboratories USA Part #42285AT

0.95mm 2FL Ball 3XD Multi-Purpose Micro Carbide End Mill, 2.85mm LOC, 3mm Shank, 38mm OAL, AT - AlTiN Coated 2.85mm LOC,3mm Shank,38mm OAL MPL Series: Multi-Purpose decimal micro end mills 3 x diameter length of cut. Premium carbide substrate with advanced geometry for diverse application range. Use uncoated for general purpose materials. Use AT in cobalt chrome, steels, stainless, high-temp alloys, and more. Use D1 PVD Diamond in graphites, aluminum silicon alloys, carbon fiber composites, reinforced plastics, & more. Round Tool Laboratories USA Part #40153AT

0.95mm 2FL Square 3XD Multi-Purpose Micro Carbide End Mill, 2.85mm LOC, 3mm Shank, 38mm OAL, AT - AlTiN Coated 2.85mm LOC,3mm Shank,38mm OAL MPL Series: Multi-Purpose decimal micro end mills 3 x diameter length of cut. Premium carbide substrate with advanced geometry for diverse application range. Use uncoated for general purpose materials. Use AT in cobalt chrome, steels, stainless, high-temp alloys, and more. Use D1 PVD Diamond in graphites, aluminum silicon alloys, carbon fiber composites, reinforced plastics, & more. Round Tool Laboratories USA Part #40127AT

1.00mm 4FL Square 1.5XD Multi-Purpose Micro Carbide End Mill, 1.50mm LOC, 3mm Shank, 38mm OAL, AT - AlTiN Coated 1.50mm LOC,3mm Shank,38mm OAL MP Series: Multi-Purpose decimal micro end mills 1.5 x diameter length of cut. Premium carbide substrate with advanced geometry for diverse application range. Use uncoated for general purpose materials. Use AT in cobalt chrome, steels, stainless, high-temp alloys, and more. Use D1 PVD Diamond in graphites, aluminum silicon alloys, carbon fiber composites, reinforced plastics, & more. Round Tool Laboratories USA Part #42287AT

1.0mm Brad Point Carbide Jobber Length Drill, 140? Point, 13mm LOC, 38mm OAL, D1 PVD Diamond Coated BP Series: 2 flute Brad Point drills. Tight tolerance drills with brad (spur) point featuring D1 SmoothCoat or UnCoated. Designed for drilling composites, plastics, wood, fiberglass, and more. Tight tolerance +0/-.0003\

1.15mm 2FL Square 1.5XD Multi-Purpose Micro Carbide End Mill, 1.73mm LOC, 3mm Shank, 38mm OAL, AT - AlTiN Coated 1.73mm LOC,3mm Shank,38mm OAL MP Series: Multi-Purpose decimal micro end mills 1.5 x diameter length of cut. Premium carbide substrate with advanced geometry for diverse application range. Use uncoated for general purpose materials. Use AT in cobalt chrome, steels, stainless, high-temp alloys, and more. Use D1 PVD Diamond in graphites, aluminum silicon alloys, carbon fiber composites, reinforced plastics, & more. Round Tool Laboratories USA Part #43290AT

1.1mm 4 Flute Square End High Hardness Carbide End Mill, 5.5mm LOC, 3mm Shank, 38mm OAL, D1 - PVD Diamond Coated 5.5mm LOC,3mm Shank,38mm OAL GR Series: D1 PVD Diamond coated high strength, high hardness solid carbide end mills for graphite & abrasive materials featuring proprietary coating for medium to long-run setups. Designed for graphite and abrasive non-metals. Proprietary cemented carbide grade, application specific geometry and D1 PVD diamond coating. Hard, thin and smooth D1 for extremely sharp cutting edge. Superior abrasion resistance for superb price / performance valuation. Extremely close diameter tolerances. Round Tool Laboratories USA Part #10651

1.25mm 2FL Ball 1.5XD Multi-Purpose Micro Carbide End Mill, 1.88mm LOC, 3mm Shank, 38mm OAL, D1 - PVD Diamond Coated 1.88mm LOC,3mm Shank,38mm OAL MP Series: Multi-Purpose decimal micro end mills 1.5 x diameter length of cut. Premium carbide substrate with advanced geometry for diverse application range. Use uncoated for general purpose materials. Use AT in cobalt chrome, steels, stainless, high-temp alloys, and more. Use D1 PVD Diamond in graphites, aluminum silicon alloys, carbon fiber composites, reinforced plastics, & more. Round Tool Laboratories USA Part #43392D1

1.30mm 4FL Square 3XD Multi-Purpose Micro Carbide End Mill, 3.90mm LOC, 3mm Shank, 38mm OAL, AT - AlTiN Coated 3.90mm LOC,3mm Shank,38mm OAL MPL Series: Multi-Purpose decimal micro end mills 3 x diameter length of cut. Premium carbide substrate with advanced geometry for diverse application range. Use uncoated for general purpose materials. Use AT in cobalt chrome, steels, stainless, high-temp alloys, and more. Use D1 PVD Diamond in graphites, aluminum silicon alloys, carbon fiber composites, reinforced plastics, & more. Round Tool Laboratories USA Part #40177AT

1.35mm (0.0531\

1.35mm (0.0531\

1.35mm 2FL Ball 3XD Multi-Purpose Micro Carbide End Mill, 4.05mm LOC, 3mm Shank, 38mm OAL, AT - AlTiN Coated 4.05mm LOC,3mm Shank,38mm OAL MPL Series: Multi-Purpose decimal micro end mills 3 x diameter length of cut. Premium carbide substrate with advanced geometry for diverse application range. Use uncoated for general purpose materials. Use AT in cobalt chrome, steels, stainless, high-temp alloys, and more. Use D1 PVD Diamond in graphites, aluminum silicon alloys, carbon fiber composites, reinforced plastics, & more. Round Tool Laboratories USA Part #40161AT

1.40mm (0.0551\

1.40mm 4FL Ball 1.5XD Multi-Purpose Micro Carbide End Mill, 2.10mm LOC, 3mm Shank, 38mm OAL, AT - AlTiN Coated 2.10mm LOC,3mm Shank,38mm OAL MP Series: Multi-Purpose decimal micro end mills 1.5 x diameter length of cut. Premium carbide substrate with advanced geometry for diverse application range. Use uncoated for general purpose materials. Use AT in cobalt chrome, steels, stainless, high-temp alloys, and more. Use D1 PVD Diamond in graphites, aluminum silicon alloys, carbon fiber composites, reinforced plastics, & more. Round Tool Laboratories USA Part #42395AT

1.45mm 2FL Square 3XD Multi-Purpose Micro Carbide End Mill, 4.35mm LOC, 3mm Shank, 38mm OAL, D1 - PVD Diamond Coated 4.35mm LOC,3mm Shank,38mm OAL MPL Series: Multi-Purpose decimal micro end mills 3 x diameter length of cut. Premium carbide substrate with advanced geometry for diverse application range. Use uncoated for general purpose materials. Use AT in cobalt chrome, steels, stainless, high-temp alloys, and more. Use D1 PVD Diamond in graphites, aluminum silicon alloys, carbon fiber composites, reinforced plastics, & more. Round Tool Laboratories USA Part #40137D1

1.45mm 4FL Square 1.5XD Multi-Purpose Micro Carbide End Mill, 2.18mm LOC, 3mm Shank, 38mm OAL, AT - AlTiN Coated 2.18mm LOC,3mm Shank,38mm OAL MP Series: Multi-Purpose decimal micro end mills 1.5 x diameter length of cut. Premium carbide substrate with advanced geometry for diverse application range. Use uncoated for general purpose materials. Use AT in cobalt chrome, steels, stainless, high-temp alloys, and more. Use D1 PVD Diamond in graphites, aluminum silicon alloys, carbon fiber composites, reinforced plastics, & more. Round Tool Laboratories USA Part #42296AT

1.4mm 2 Flute Square End High Hardness Carbide End Mill, 7mm LOC, 3mm Shank, 38mm OAL, AlTiN Coated w/SE1 Edge Prep 7mm LOC,3mm Shank,38mm OAL GR Series: AT coated with SmoothEdge Prep, Thick core, high strength, high hardness solid carbide end mills with increased helix. Designed for milling of die & hardened steels & other hard metals. Tight diameter tolerance. Proprietary cemented carbide grade offers extremely high hardness and density. Strengthened cutting edges & reduced break-in with SmoothEdge SE1 for diameters less than 1/8\

1.4mm 4 Flute Ball Nose High Hardness Carbide End Mill, 7mm LOC, 3mm Shank, 38mm OAL, D1 - PVD Diamond Coated 7mm LOC,3mm Shank,38mm OAL GR Series: D1 PVD Diamond coated high strength, high hardness solid carbide end mills for graphite & abrasive materials featuring proprietary coating for medium to long-run setups. Designed for graphite and abrasive non-metals. Proprietary cemented carbide grade, application specific geometry and D1 PVD diamond coating. Hard, thin and smooth D1 for extremely sharp cutting edge. Superior abrasion resistance for superb price / performance valuation. Extremely close diameter tolerances. Round Tool Laboratories USA Part #10683

1.5mm 4 Flute Square End High Hardness Carbide End Mill, 7.5mm LOC, 3mm Shank, 38mm OAL, AlTiN Coated w/SE1 Edge Prep 7.5mm LOC,3mm Shank,38mm OAL GR Series: AT coated with SmoothEdge Prep, Thick core, high strength, high hardness solid carbide end mills with increased helix. Designed for milling of die & hardened steels & other hard metals. Tight diameter tolerance. Proprietary cemented carbide grade offers extremely high hardness and density. Strengthened cutting edges & reduced break-in with SmoothEdge SE1 for diameters less than 1/8\

1.6mm 2 Flute Ball Nose High Hardness Carbide End Mill, 8mm LOC, 3mm Shank, 38mm OAL, AlTiN Coated w/SE1 Edge Prep 8mm LOC,3mm Shank,38mm OAL GR Series: AT coated with SmoothEdge Prep, Thick core, high strength, high hardness solid carbide end mills with increased helix. Designed for milling of die & hardened steels & other hard metals. Tight diameter tolerance. Proprietary cemented carbide grade offers extremely high hardness and density. Strengthened cutting edges & reduced break-in with SmoothEdge SE1 for diameters less than 1/8\

1.70mm (0.0669\

1.75mm (0.0689\

1.7mm 4 Flute Square End High Hardness Carbide End Mill, 8.5mm LOC, 3mm Shank, 38mm OAL, AlTiN Coated w/SE1 Edge Prep 8.5mm LOC,3mm Shank,38mm OAL GR Series: AT coated with SmoothEdge Prep, Thick core, high strength, high hardness solid carbide end mills with increased helix. Designed for milling of die & hardened steels & other hard metals. Tight diameter tolerance. Proprietary cemented carbide grade offers extremely high hardness and density. Strengthened cutting edges & reduced break-in with SmoothEdge SE1 for diameters less than 1/8\

1.80mm (0.0709\

1.85mm (0.0728\

1.90mm (0.0748\