The <b>RM-4210W-3G2</b> is a full-featured slim, in-rack video monitor ideal for mobile trucks, news and transmission control rooms, production/post-production and video surveillance applications. These tilting monitors come standard with in-monitor level metering, selectable video waveform/vectorscope/histogram, safe area and aspect ratio markers, IMD labeling, tally, and built-in color bars, as well as a variety of picture controls and assistive video features such as zoom controls and focus assist.</p><p>All standard frame rates and resolutions are supported from 3G-SDI, HDMI or Analog input sources and each input has a looping output. Up to 16 audio channels may be selected for visual monitoring using on-screen bar graph style level meters. Monitoring speakers to the rear of the unit allow the selected screen to be audibly monitored, while a 3.5mm headphone socket provides optional private monitoring.</p><p>Each of the high-resolution LCD screens displays high-definition or standard-definition video in a range of aspect ratios. Parameters are selected and adjusted using an on-screen display menu.</p>
The Ultra-compact, 2 channel audio monitor that fits perfectly in a network facility or OB truck for live events. This makes the <b>AMP1-2SDA</b> ideal for a range of applications where basic, but reliable audio monitoring is required.</p><p>Wohler has distilled 25 plus years of knowledge and experience into our AMP1- 2SDA product. This unit has Wohler build quality, a shallow depth of five inches, and great pricing. Fast selection and monitoring of any available pair of audio is available via either 1 x 3G-SDI (with looped output), 1 x AES3 input pair, and either of 2 pairs of Analog inputs (Balanced or Unbalanced). Analog and AES3 outputs of the selected pair are included in the unit for external monitoring.</p><p>Designed with simplicity in mind, the AMP1-2SDA provides two rotary controls that allow the user to easily select a source with the first and then move through that source's corresponding audio pairs with the second. A large front panel screen, highly visible to users, displays the selected source and monitored pair, along with brightly displayed levels on 2 x 26 segment LED meters. Additional features include simple tone controls for adjusting audio output and an audio trim control for altering the analog output levels.</p><p>An optional hardware input card (AMP1-2SDA+) provides 8 additional pairs (16 channels) of both Analog and AES on 3 x DB-25 inputs.</p>
The Wohler <strong>AMP1-DA/106</strong> provides self-powered, full-fidelity stereo audio monitoring of 2 channels from analog and AES/EBU Digital sources and ultra-high resolution LEDs with 106 segments in the smallest rack space possible.</p><p>This unit contains four high performance transducers driven by three power amplifiers: one amplifier/driver combination handles midrange and high frequency information in stereo, while the second handles summed low frequency information below the 500 Hz crossover point. The unique design provides optimally focused sound for operators in an ultra near field (1 to 3 ft.) working environment and offers performance comparable to that of many separate monitor pairs, yet does so without the installation hassles, awkward speaker placements and "added-on" look. This provides for a higher SPL for the operator while reducing overall ambient sound and adjacent bay crosstalk. The level meters are now available with a choice of BBC, DIN, Nordic and VU scales and PPM Only.</p><p>Extended HF response reveals potential problems with audio, whine, or hiss. Electronic rather than acoustic cancellation of bass frequencies provides positive audible detection of out-of-phase (reversed polarity) audio feeds. A headphone jack is provided on the front panel, usage automatically mutes the speakers. Output limiter circuits are incorporated to protect the speakers, and extensive magnetic shielding allows placement immediately adjacent to video monitors with no color impurities. Our unique tri-color LED design means we can offer an almost unlimited variety of options such as phase correlation, peak hold, and alternate scales.The standard display mode is set as a single segment PPM "dot" above a VU bar; each segment's color is fixed according to its position on the scale. Level calibration may be set via dip switches to select one of four different calibration levels.</p><p>The AMP1-DA/106 is ideally suited for use in VTR bays, mobile production vehicles, teleconferencing installations, multimedia systems, satellite link and cable TV facilities, and on-air radio studios.</p>
The Wohler <strong>AMPx-E8</strong> Series monitors are the world's first in-rack audio monitors capable of outputting and/or displaying encoded, multi-channel (up to 8 channels) audio from Dolby E®, Dolby Digital®, or Dolby Digital Plus®, streams de-embedded from either 3G/HD/SD-SDI without prior Dolby encoding.</p><p>The ability to switch seamlessly between encoded or discretely embedded sources, in addition to providing full, simultaneous demuxed output of the multichannel source, offers a significant new operational capability in a single monitor unit.</p><p>These units feature 3 audiophile-quality drivers, and 3 power amplifiers; 2 speakers and amplifiers reproduce midrange and high frequency information in stereo, while a third amp/driver combination handles summed LF information below the 500Hz crossover point.</p><p>Extended HF response reveals potential problems with audio whine or hiss and electronic, rather than acoustic, cancellation of bass frequencies provides positive audible detection of reversed polarity audio feeds.</p>