Y.G-1 TOOL CO. Products

All products from this brand (1523 total)

1mm 2FL Ball Nose 30? 4G Coated Carbide End Mill For Steels <HRc55, 10mm Reach, 1mm LOC, 4mm Shank, 50mm OAL 1mm LOC,4mm SHANK,50mm OAL 4G Carbide End Mill For High Speed Cutting Mold & Die Pre-Hardened Steels Up To HRc55 YG-1 Part # SEM84601010

1mm 2FL Ball Nose 30? 4G Coated Carbide End Mill For Steels <HRc55, 16mm Reach, 1mm LOC, 6mm Shank, 50mm OAL 1mm LOC,6mm SHANK,50mm OAL 4G Carbide End Mill For High Speed Cutting Mold & Die Pre-Hardened Steels Up To HRc55 YG-1 Part # SEM846010166S

1mm 2FL Ball Nose 30? 4G Coated Carbide End Mill For Steels <HRc55, 18mm Reach, 1mm LOC, 4mm Shank, 50mm OAL 1mm LOC,4mm SHANK,50mm OAL 4G Carbide End Mill For High Speed Cutting Mold & Die Pre-Hardened Steels Up To HRc55 YG-1 Part # SEM84601018

1mm 2FL Ball Nose 30? 4G Coated Carbide End Mill For Steels <HRc55, 22mm Reach, 1mm LOC, 6mm Shank, 60mm OAL 1mm LOC,6mm SHANK,60mm OAL 4G Carbide End Mill For High Speed Cutting Mold & Die Pre-Hardened Steels Up To HRc55 YG-1 Part # SEM846010226S

1mm 2FL Ball Nose 30? 4G Coated Carbide End Mill For Steels <HRc55, 26mm Reach, 1mm LOC, 6mm Shank, 60mm OAL 1mm LOC,6mm SHANK,60mm OAL 4G Carbide End Mill For High Speed Cutting Mold & Die Pre-Hardened Steels Up To HRc55 YG-1 Part # SEM846010266S

1mm 2FL Ball Nose 30? 4G Coated Carbide End Mill For Steels <HRc55, 6mm Reach, 1mm LOC, 4mm Shank, 50mm OAL 1mm LOC,4mm SHANK,50mm OAL 4G Carbide End Mill For High Speed Cutting Mold & Die Pre-Hardened Steels Up To HRc55 YG-1 Part # SEM84601006

1mm 2FL Ball Nose 30? Helix 4G Mill Coated Carbide End Mill For Steels <HRc55, 2.5mm LOC, 6mm Shank, 100mm OAL 2.5mm LOC,6mm SHANK,100mm OAL 4G Carbide End Mill For High Speed Cutting Mold & Die Pre-Hardened Steels Up To HRc55 YG-1 Part # SEMD98010100

1mm 2FL Ball Nose 30? Helix 4G Mill Coated Carbide End Mill For Steels <HRc55, 2.5mm LOC, 6mm Shank, 50mm OAL 2.5mm LOC,6mm SHANK,50mm OAL 4G Carbide End Mill For High Speed Cutting Mold & Die Pre-Hardened Steels Up To HRc55 YG-1 Part # SEMD98010

1mm 2FL Necked 30? 4G Mill Coated Carbide End Mill For Steels <HRc55, .20mm Radius, 12mm Reach, 1.5mm LOC, 50mm OAL 1.5mm LOC,4mm SHANK,50mm OAL 4G Carbide End Mill For High Speed Cutting Mold & Die Pre-Hardened Steels Up To HRc55 YG-1 Part # SEME610100212

1mm 2FL Necked 30? 4G Mill Coated Carbide End Mill For Steels <HRc55, .20mm Radius, 14mm Reach, 1.5mm LOC, 50mm OAL 1.5mm LOC,4mm SHANK,50mm OAL 4G Carbide End Mill For High Speed Cutting Mold & Die Pre-Hardened Steels Up To HRc55 YG-1 Part # SEME610100214

1mm 2FL Necked 30? 4G Mill Coated Carbide End Mill For Steels <HRc55, .30mm Radius, 16mm Reach, 1.5mm LOC, 50mm OAL 1.5mm LOC,4mm SHANK,50mm OAL 4G Carbide End Mill For High Speed Cutting Mold & Die Pre-Hardened Steels Up To HRc55 YG-1 Part # SEME610100316

1mm 2FL Necked 30? 4G Mill Coated Carbide End Mill For Steels <HRc55, .30mm Radius, 8mm Reach, 1.5mm LOC, 50mm OAL 1.5mm LOC,4mm SHANK,50mm OAL 4G Carbide End Mill For High Speed Cutting Mold & Die Pre-Hardened Steels Up To HRc55 YG-1 Part # SEME610100308

1mm 2FL Necked 30? 4G Mill Coated Carbide End Mill For Steels <HRc55, 12mm Reach, 1.5mm LOC, 4mm Shank, 50mm OAL 1.5mm LOC,4mm SHANK,50mm OAL 4G Carbide End Mill For High Speed Cutting Mold & Die Pre-Hardened Steels Up To HRc55 YG-1 Part # SEM84501012

1mm 2FL Necked 30? 4G Mill Coated Carbide End Mill For Steels <HRc55, 26mm Reach, 1.5mm LOC, 4mm Shank, 60mm OAL 1.5mm LOC,4mm SHANK,60mm OAL 4G Carbide End Mill For High Speed Cutting Mold & Die Pre-Hardened Steels Up To HRc55 YG-1 Part # SEM84501026

1mm 2FL Necked 30? 4G Mill Coated Carbide End Mill For Steels <HRc55, 40mm Reach, 1.5mm LOC, 4mm Shank, 80mm OAL 1.5mm LOC,4mm SHANK,80mm OAL 4G Carbide End Mill For High Speed Cutting Mold & Die Pre-Hardened Steels Up To HRc55 YG-1 Part # SEM84501040

1mm 2FL Necked 30? 4G Mill Coated Carbide End Mill For Steels <HRc55, 8mm Reach, 1.5mm LOC, 4mm Shank, 50mm OAL 1.5mm LOC,4mm SHANK,50mm OAL 4G Carbide End Mill For High Speed Cutting Mold & Die Pre-Hardened Steels Up To HRc55 YG-1 Part # SEM84501008

1mm 4FL 30? Helix 4G Mill Coated Carbide End Mill For Steels <HRc55, .10mm Radius, 2.5mm LOC, 6mm Shank, 50mm OAL 2.5mm LOC,6mm SHANK,50mm OAL 4G Carbide End Mill For High Speed Cutting Mold & Die Pre-Hardened Steels Up To HRc55 YG-1 Part # SEME0101001

1mm 4FL Necked 30? 4G Mill Coated Carbide End Mill For Steels <HRc55, 16mm Reach, 1.5mm LOC, 4mm Shank, 50mm OAL 1.5mm LOC,4mm SHANK,50mm OAL 4G Carbide End Mill For High Speed Cutting Mold & Die Pre-Hardened Steels Up To HRc55 YG-1 Part # SEME7301016

1mm 4FL Necked 30? 4G Mill Coated Carbide End Mill For Steels <HRc55, 30mm Reach, 1.5mm LOC, 4mm Shank, 70mm OAL 1.5mm LOC,4mm SHANK,70mm OAL 4G Carbide End Mill For High Speed Cutting Mold & Die Pre-Hardened Steels Up To HRc55 YG-1 Part # SEME7301030

1mm 4FL Necked Multi-Helix 4G Coated Carbide End Mill For Steels <HRc55, .05mm Radius, 10mm Reach, 1.5mm LOC, 50mm OAL 1.5mm LOC,4mm SHANK,50mm OAL 4G Carbide End Mill For High Speed Cutting Mold & Die Pre-Hardened Steels Up To HRc55 YG-1 Part # SEME6401000510

1mm 4FL Necked Multi-Helix 4G Coated Carbide End Mill For Steels <HRc55, .05mm Radius, 16mm Reach, 1.5mm LOC, 50mm OAL 1.5mm LOC,4mm SHANK,50mm OAL 4G Carbide End Mill For High Speed Cutting Mold & Die Pre-Hardened Steels Up To HRc55 YG-1 Part # SEME6401000516

1mm 4FL Necked Multi-Helix 4G Coated Carbide End Mill For Steels <HRc55, .10mm Radius, 10mm Reach, 1.5mm LOC, 50mm OAL 1.5mm LOC,4mm SHANK,50mm OAL 4G Carbide End Mill For High Speed Cutting Mold & Die Pre-Hardened Steels Up To HRc55 YG-1 Part # SEME640100110

1mm 4FL Necked Multi-Helix 4G Coated Carbide End Mill For Steels <HRc55, .30mm Radius, 10mm Reach, 1.5mm LOC, 50mm OAL 1.5mm LOC,4mm SHANK,50mm OAL 4G Carbide End Mill For High Speed Cutting Mold & Die Pre-Hardened Steels Up To HRc55 YG-1 Part # SEME640100310

1mm CBN 2 Flute Ball Nose End Mill For High Hardened Steels To HRc70, .6mm LOC, 4mm Shank, 50mm OAL 0.6mm LOC,4mm SHANK,50mm OAL .95mm Neck Diameter x 4mm Length Of Reach. High Performance 30? Helix Cubic Boron Nitride End Mill. YG-1 Part # ESB94010040

1mm CBN 2 Flute Corner Radius End Mill For High Hardened Steels To HRc70, .7mm LOC, 4mm Shank, 50mm OAL, .05mm Radius 0.7mm LOC,4mm SHANK,50mm OAL .95mm Neck Diameter x 3mm Length of Reach x .05mm Corner Radius. High Performance 30? Helix Cubic Boron Nitride End Mill. YG-1 Part # ESD02010053

1mm CBN 2 Flute Corner Radius End Mill For High Hardened Steels To HRc70, .7mm LOC, 4mm Shank, 50mm OAL, .10mm Radius 0.7mm LOC,4mm SHANK,50mm OAL .95mm Neck Diameter x 5mm Length of Reach x .10mm Corner Radius. High Performance 30? Helix Cubic Boron Nitride End Mill. YG-1 Part # ESD02010105

2.0mm (0.0787\

2.0mm Diameter 2 Flute YG Parabolic Flute Jobber Length TiN Coated Tip Gold-P Drill, HSS-Co5% (M35 Cobalt), 130? Split Point, Straight Shank, 24mm Flute Length, 49mm OAL. Pre-Packaged & Sold In Packs Of 10 Pieces.

2.5mm (0.0984\

2.5mm 2FL 30? Helix 4G Mill Coated Carbide End Mill For Steels <HRc55, 8mm LOC, 2.5mm Shank, 50mm OAL 8mm LOC,2.5mm SHANK,50mm OAL 4G Carbide End Mill For High Speed Cutting Mold & Die Pre-Hardened Steels Up To HRc55 YG-1 Part # SEME350254S

2.5mm 2FL 30? Helix 4G Mill Long Coated Carbide End Mill For Steels <HRc55, 10mm LOC, 6mm Shank, 60mm OAL 10mm LOC,6mm SHANK,60mm OAL 4G Carbide End Mill For High Speed Cutting Mold & Die Pre-Hardened Steels Up To HRc55 YG-1 Part # SEME7002510

2.5mm 2FL Ball Nose 30? 4G Coated Carbide End Mill For Steels <HRc55, 35mm Reach, 2.5mm LOC, 4mm Shank, 70mm OAL 2.5mm LOC,4mm SHANK,70mm OAL 4G Carbide End Mill For High Speed Cutting Mold & Die Pre-Hardened Steels Up To HRc55 YG-1 Part # SEM84602535

2.5mm 2FL Ball Nose 30? 4G Coated Carbide End Mill For Steels <HRc55, 40mm Reach, 2.5mm LOC, 4mm Shank, 80mm OAL 2.5mm LOC,4mm SHANK,80mm OAL 4G Carbide End Mill For High Speed Cutting Mold & Die Pre-Hardened Steels Up To HRc55 YG-1 Part # SEM84602540

2.5mm 2FL Ball Nose 30? Helix 4G Mill Coated Carbide End Mill For Steels <HRc55, 6mm LOC, 6mm Shank, 100mm OAL 6mm LOC,6mm SHANK,100mm OAL 4G Carbide End Mill For High Speed Cutting Mold & Die Pre-Hardened Steels Up To HRc55 YG-1 Part # SEMD98025100

2.5mm 2FL Necked 30? 4G Mill Coated Carbide End Mill For Steels <HRc55, .10mm Radius, 30mm Reach, 4mm LOC, 70mm OAL 4mm LOC,4mm SHANK,70mm OAL 4G Carbide End Mill For High Speed Cutting Mold & Die Pre-Hardened Steels Up To HRc55 YG-1 Part # SEME610250130

2.5mm 2FL Necked 30? 4G Mill Coated Carbide End Mill For Steels <HRc55, .20mm Radius, 14mm Reach, 4mm LOC, 50mm OAL 4mm LOC,4mm SHANK,50mm OAL 4G Carbide End Mill For High Speed Cutting Mold & Die Pre-Hardened Steels Up To HRc55 YG-1 Part # SEME610250214

2.5mm 2FL Necked 30? 4G Mill Coated Carbide End Mill For Steels <HRc55, .30mm Radius, 30mm Reach, 4mm LOC, 70mm OAL 4mm LOC,4mm SHANK,70mm OAL 4G Carbide End Mill For High Speed Cutting Mold & Die Pre-Hardened Steels Up To HRc55 YG-1 Part # SEME610250330

2.5mm 2FL Necked 30? 4G Mill Coated Carbide End Mill For Steels <HRc55, .5mm Radius, 16mm Reach, 4mm LOC, 50mm OAL 4mm LOC,6mm SHANK,50mm OAL 4G Carbide End Mill For High Speed Cutting Mold & Die Pre-Hardened Steels Up To HRc55 YG-1 Part # SEME610250516

2.5mm 2FL Necked 30? 4G Mill Coated Carbide End Mill For Steels <HRc55, 20mm Reach, 4mm LOC, 4mm Shank, 50mm OAL 4mm LOC,4mm SHANK,50mm OAL 4G Carbide End Mill For High Speed Cutting Mold & Die Pre-Hardened Steels Up To HRc55 YG-1 Part # SEM84502520

2.5mm 4FL 38? Helix 4G Mill Coated Carbide End Mill For Steels <HRc55, 2.5mm LOC, 6mm Shank, 40mm OAL 2.5mm LOC,6mm SHANK,40mm OAL 4G Carbide End Mill For High Speed Cutting Mold & Die Pre-Hardened Steels Up To HRc55 YG-1 Part # SEME71025025

2.5mm 4FL Necked 30? 4G Mill Coated Carbide End Mill For Steels <HRc55, 14mm Reach, 4mm LOC, 4mm Shank, 50mm OAL 4mm LOC,4mm SHANK,50mm OAL 4G Carbide End Mill For High Speed Cutting Mold & Die Pre-Hardened Steels Up To HRc55 YG-1 Part # SEME7302514

2.5mm 4FL Necked Multi-Helix 4G Coated Carbide End Mill For Steels <HRc55, .10mm Radius, 14mm Reach, 4mm LOC, 50mm OAL 4mm LOC,4mm SHANK,50mm OAL 4G Carbide End Mill For High Speed Cutting Mold & Die Pre-Hardened Steels Up To HRc55 YG-1 Part # SEME640250114

2.5mm 4FL Necked Multi-Helix 4G Coated Carbide End Mill For Steels <HRc55, .10mm Radius, 26mm Reach, 4mm LOC, 60mm OAL 4mm LOC,4mm SHANK,60mm OAL 4G Carbide End Mill For High Speed Cutting Mold & Die Pre-Hardened Steels Up To HRc55 YG-1 Part # SEME640250126

2.5mm 4FL Necked Multi-Helix 4G Coated Carbide End Mill For Steels <HRc55, .10mm Radius, 30mm Reach, 4mm LOC, 70mm OAL 4mm LOC,4mm SHANK,70mm OAL 4G Carbide End Mill For High Speed Cutting Mold & Die Pre-Hardened Steels Up To HRc55 YG-1 Part # SEME640250130

2.5mm 4FL Necked Multi-Helix 4G Coated Carbide End Mill For Steels <HRc55, .20mm Radius, 14mm Reach, 4mm LOC, 50mm OAL 4mm LOC,4mm SHANK,50mm OAL 4G Carbide End Mill For High Speed Cutting Mold & Die Pre-Hardened Steels Up To HRc55 YG-1 Part # SEME640250214

2.5mm 4FL Necked Multi-Helix 4G Coated Carbide End Mill For Steels <HRc55, .30mm Radius, 10mm Reach, 4mm LOC, 50mm OAL 4mm LOC,4mm SHANK,50mm OAL 4G Carbide End Mill For High Speed Cutting Mold & Die Pre-Hardened Steels Up To HRc55 YG-1 Part # SEME640250310

2.5mm 4FL Necked Multi-Helix 4G Coated Carbide End Mill For Steels <HRc55, .30mm Radius, 14mm Reach, 4mm LOC, 50mm OAL 4mm LOC,4mm SHANK,50mm OAL 4G Carbide End Mill For High Speed Cutting Mold & Die Pre-Hardened Steels Up To HRc55 YG-1 Part # SEME640250314

2.5mm 4FL Necked Multi-Helix 4G Coated Carbide End Mill For Steels <HRc55, .30mm Radius, 16mm Reach, 4mm LOC, 50mm OAL 4mm LOC,4mm SHANK,50mm OAL 4G Carbide End Mill For High Speed Cutting Mold & Die Pre-Hardened Steels Up To HRc55 YG-1 Part # SEME640250316

2.5mm 4FL Necked Multi-Helix 4G Coated Carbide End Mill For Steels <HRc55, .50mm Radius, 10mm Reach, 4mm LOC, 50mm OAL 4mm LOC,4mm SHANK,50mm OAL 4G Carbide End Mill For High Speed Cutting Mold & Die Pre-Hardened Steels Up To HRc55 YG-1 Part # SEME640250510

2.5mm 4FL Necked Multi-Helix 4G Coated Carbide End Mill For Steels <HRc55, .50mm Radius, 16mm Reach, 4mm LOC, 50mm OAL 4mm LOC,4mm SHANK,50mm OAL 4G Carbide End Mill For High Speed Cutting Mold & Die Pre-Hardened Steels Up To HRc55 YG-1 Part # SEME640250516

2.6mm Diameter 2 Flute YG Parabolic Flute Jobber Length TiN Coated Tip Gold-P Drill, HSS-Co5% (M35 Cobalt), 130? Split Point, Straight Shank, 30mm Flute Length, 57mm OAL. Pre-Packaged & Sold In Packs Of 10 Pieces.

2.8mm 2FL 30? Helix 4G Mill Coated Carbide End Mill For Steels <HRc55, 8mm LOC, 2.8mm Shank, 50mm OAL 8mm LOC,2.8mm SHANK,50mm OAL 4G Carbide End Mill For High Speed Cutting Mold & Die Pre-Hardened Steels Up To HRc55 YG-1 Part # SEME350284S

2.8mm Diameter 2 Flute YG Parabolic Flute Jobber Length TiN Coated Tip Gold-P Drill, HSS-Co5% (M35 Cobalt), 130? Split Point, Straight Shank, 33mm Flute Length, 61mm OAL. Pre-Packaged & Sold In Packs Of 10 Pieces.

2.9mm Diameter 2 Flute YG Parabolic Flute Jobber Length TiN Coated Tip Gold-P Drill, HSS-Co5% (M35 Cobalt), 130? Split Point, Straight Shank, 33mm Flute Length, 61mm OAL. Pre-Packaged & Sold In Packs Of 10 Pieces.

20.0mm Diameter 2 Flute YG Carbide Dream Drill For Aluminum, 118? Point, 5XD With Coolant Holes, DLC (Diamond Like Carbon) Coated - 20mm Shank x 101mm Flute Length x 153mm OAL

20.0mm Diameter 2 Flute YG Flat Bottom Carbide Dream Drill, 180? Point, 2XD Without Coolant Holes, X-Coating, TiAlN nano Layer - 20mm Shank x 75mm Flute Length x 145mm OAL

20mm 2FL 30? Helix 4G Mill Coated Carbide End Mill For Steels <HRc55, 2mm Radius, 38mm LOC, 20mm Shank, 150mm OAL 38mm LOC,20mm SHANK,150mm OAL 4G Carbide End Mill For High Speed Cutting Mold & Die Pre-Hardened Steels Up To HRc55 YG-1 Part # SEMD9920020

20mm 2FL 30? Helix 4G Mill Coated Carbide End Mill For Steels <HRc55, 45mm LOC, 20mm Shank, 100mm OAL 45mm LOC,20mm SHANK,100mm OAL 4G Carbide End Mill For High Speed Cutting Mold & Die Pre-Hardened Steels Up To HRc55 YG-1 Part # SEME35200

20mm 2FL 30? Helix 4G Mill Long Coated Carbide End Mill For Steels <HRc55, 50mm LOC, 20mm Shank, 110mm OAL 50mm LOC,20mm SHANK,110mm OAL 4G Carbide End Mill For High Speed Cutting Mold & Die Pre-Hardened Steels Up To HRc55 YG-1 Part # SEME7020050

20mm 4FL 30? Helix 4G Mill Coated Carbide Long End Mill For Steels <HRc55, 70mm LOC, 20mm Shank, 130mm OAL 70mm LOC,20mm SHANK,130mm OAL 4G Carbide End Mill For High Speed Cutting Mold & Die Pre-Hardened Steels Up To HRc55 YG-1 Part # SEME7220070

20mm 4FL Multi-Helix 4G Mill Coated Carbide End Mill For Steels <HRc55, 45mm LOC, 20mm Shank, 100mm OAL 45mm LOC,20mm SHANK,100mm OAL 4G Carbide End Mill For High Speed Cutting Mold & Die Pre-Hardened Steels Up To HRc55 YG-1 Part # SEME71200

20mm 4FL Necked Multi-Helix 4G Coated Carbide End Mill For Steels <HRc55, 1.00mm Radius, 40mm Reach, 25mm LOC, 100mm OAL 25mm LOC,20mm SHANK,100mm OAL 4G Carbide End Mill For High Speed Cutting Mold & Die Pre-Hardened Steels Up To HRc55 YG-1 Part # SEME6420010

20mm x 1.0mm Corner Radius I-Xmill Carbide Insert For Graphite Best Use in Graphite - Also Effective in Aluminum + Carbon Steels, Alloy Steels, and Tool Steels to HRc35 20mm Width x 1mm Corner Radius x 16mm Height x 5.2mm Thick YG-1 Part # XRAD20010

21/64\

21mm x 0.50mm Corner Radius I-Xmill Carbide Insert For Graphite Best Use in Graphite - Also Effective in Aluminum + Carbon Steels, Alloy Steels, and Tool Steels to HRc35 21mm Width x .5mm Corner Radius x 16mm Height x 5.2mm Thick YG-1 Part # XRAD21005

21mm x 1.0mm Corner Radius I-Xmill Carbide Insert For Graphite Best Use in Graphite - Also Effective in Aluminum + Carbon Steels, Alloy Steels, and Tool Steels to HRc35 21mm Width x 1mm Corner Radius x 16mm Height x 5.2mm Thick YG-1 Part # XRAD21010

22mm 2FL 30? Helix 4G Mill Long Coated Carbide End Mill For Steels <HRc55, 110mm LOC, 20mm Shank, 200mm OAL 110mm LOC,20mm SHANK,200mm OAL 4G Carbide End Mill For High Speed Cutting Mold & Die Pre-Hardened Steels Up To HRc55 YG-1 Part # SEME70220110

22mm 2FL 30? Helix 4G Mill Long Coated Carbide End Mill For Steels <HRc55, 75mm LOC, 20mm Shank, 150mm OAL 75mm LOC,20mm SHANK,150mm OAL 4G Carbide End Mill For High Speed Cutting Mold & Die Pre-Hardened Steels Up To HRc55 YG-1 Part # SEME7022075

22mm 4FL 30? Helix 4G Mill Coated Carbide Long End Mill For Steels <HRc55, 75mm LOC, 20mm Shank, 150mm OAL 75mm LOC,20mm SHANK,150mm OAL 4G Carbide End Mill For High Speed Cutting Mold & Die Pre-Hardened Steels Up To HRc55 YG-1 Part # SEME7222075

23/64\

24mm 2FL 30? Helix 4G Mill Coated Carbide End Mill For Steels <HRc55, 50mm LOC, 25mm Shank, 120mm OAL 50mm LOC,25mm SHANK,120mm OAL 4G Carbide End Mill For High Speed Cutting Mold & Die Pre-Hardened Steels Up To HRc55 YG-1 Part # SEME35240

25/64\