OBD2 Scanner, USB ELM327 Adapter Car Computer OBD ii Code Reader Diagnostic Tool, Forscan Elmconfig Scan Tools for Ford Vehicles and Light Trucks: Maxedbuy.com

<b>Ford OBD2 scanner Functions: </b> <br>Read/erase fault codes from ALL modules (such as Focus, Mondeo/Fusion, Kuga, S-Max, C-Max, Transit, Ranger, F150 etc ) <br>Access modules on both HS-CAN and MS-CAN mode <br>Read vehicle configuration, actuator tests <br>Live Data: Air Flow Rate, Engine RPM, Vehicle Speed, Intake Air Temperature <br>Injector coding, programming, coding, adaptations <br>Service procedures <br>Force DPF regeneration <br>Oxygen Sensors <br>Fuel System status <br>Long /Short Term Fuel Trim <br> <br><b>Supported Modules:</b> <br>HS CAN: PCM TCM APIM DCDC PAM HCM and many others <br>MS CAN: BCMII SODR SODL FCIM TRM RGTM RTM PDM DDM HSWM GPSM DSM <br>HS CAN2: FDSM ABS RCM PSCM SCCM GWM IPMA <br> <br><b> FORScan OBD2 Adapter Supported Software: </b> <br><b>Forscan</b> (The ultimate hidden scan tool software. You can access the Global Window feature, Bambi Mod, reverse tilt mirrors,<br> tire size correction, Perpendicular Park, Secure Idle, 5 turn signal flash, heated steering wheel, disabled double horn honk, <br>disabled door ajar chime, and many more! ) <br><b>ELMconfig </b> <br><b>FoCCCus </b> <br><b>FF2 </b> <br> <br><b>Modified ELM327 interface-Special for Ford/Mazda : </b> <br> <br>Please NOTE: many Ford and Mazda models (approximately since 2003-2004) are equipped with MS CAN bus, in addition to the regular HS CAN bus. In contrast to HS CAN bus, MS CAN bus is not supported by the stock ELM327, because MS CAN is a manufacturer-specific solution and located on non-OBD2 pins. This obd2 adapter has been modified to allow it to implement the MS CAN bus. <br> <br>ELM327 supports HS CAN from the stock, because for Ford HS CAN completely matches to the OBD2 standards. It occupies pins 6 and 14. MS CAN bus occupies pins 3 and 11.