Modine . PDP200AE0185SBAN

The PDP (propeller) High Efficiency II gas-fired unit heaters are a generation of products that are inexpensive to install, easy to use, and offer excellent in-service economy. Features: BTU: 200K. Flue Type: LP. Made in the USA. Ignition: Intermittent Pilot. A safety pressure-switch to assure safe venting conditions. Designed to utilize the smallest-diameter vent pipe possible. Optional finger-proof fan guard for operation at low mounting height. Aluminized Steel Heat Exchanger and Aluminized Steel Burner - 115V. ''Wing'' screws so that the bottom pan can be dropped without a screwdriver or nut driver. A power exhaust that can be rotated 180 Deg. The unit can be vented vertically or horizontally. 80% thermal efficiency, maximizing seasonal efficiency through the use of a collector box and the power exhauster. A level hanging mechanism for easy field adjustments after adding accessories that may change the unit's center of gravity. A 100% shut-off, intermittent pilot-ignition system with continuous retry, at no extra charge. This ignition system allows for all PDP units to be field-converted to propane, if desired.

<p><ul><li>The PDP (propeller) and BDP (blower) High Efficiency II gas-fired unit heaters are a generation of products that are inexpensive to install, easy to use, and offer excellent in-service economy.Each Modine power-exhausted unit heater has been engineered to include the following features:<ul></li><li> 80% thermal efficiency, maximizing seasonal efficiency through the use of a collector box and the power exhauster.</li><li>A power exhaust that can be rotated 180°. The unit can be vented vertically or horizontally.</li><li>A 100% shut-off, intermittent pilot-ignition system with continuous retry, at no extra charge. This ignition system allows for all PDP/BDP units to be field-converted to propane, if desired.</li><li>A safety pressure-switch to assure safe venting conditions.</li><li>Designed to utilize the smallest-diameter vent pipe possible.</li><li>BDP models are designed to operate against 0.5 inches of external static pressure.</li><li>"Wing" screws so that the bottom pan can be dropped without a screwdriver or nut driver.</li><li>A level hanging mechanism for easy field adjustments after adding accessories that may change the unit’s center of gravity.</li><li>Optional finger-proof fan guard for operation at low mounting heights</li><li>MADE IN THE USA</li></ul></p><p><b>Specifications: </b><ul><li>BTU: 200000 </li><li> Type:Unit Heater </li><li> BTU Input:200000 </li><li> BTU Output:160000 </li><li> Horse Power: 1/6 </li><li> Entering Airflow (CFM) @ 70°F:2870 </li><li> Air Temp. Rise (°F):52°F </li><li> Max Mounting Height (ft):15 feet </li><li> Weight (lbs):239 lbs </li><li> Gas Type:Liquid Propane </li><li> Application:Heating </li><li> Material:Aluminized Steel </li><li> Voltage: 115v </li><li> Hertz:60 </li><li> Efficiency: 80% Thermal Efficiency </li><li> Phase:1</li></ul></p>