As an Amazon Associate, we earn from qualifying purchases.

Motobilt Jeep JK Front Bumper 07-18 Wrangler JK Crusher Series Bare Steel - MB1011

MOTOBILT . MB1011

Attributes

Brand name, Manufacturer nameMOTOBILT
ManufacturerMOTOBILT Motobilt
KnownMan, Extra Product NameMotobilt Jeep JK Front Bumper 07-18 Wrangler JK Crusher Series Bare Steel - MB1011
moq, multiple, tierMinQty1, Item_package_quantity, NumberOfItems, Number_of_items, PackageQuantity1
MPN, PartNumber, Part_numberMB1011
qtyInStock0
SKU001576615
tierPrice1650.35
ASIN, AsinB07JG31HZN
AdultProductTrue
Amount, List_price711.76
Auto_part_positionfront
Autographed, Batteries_included, Batteries_required, Memorabilia, TradeInEligibleFalse
Brand, Label, Publisher, StudioMotobilt
Bullet_point2012 and newer models will need a vacuum relocation pump PN MB2060. The factory bracket must be cut off in order for the winch plate to fit. | Fairlead spacer included to allow use of a centered or off set winch design. | Does NOT work with Super Winch EXP Fits JK/JKU Measures in at just 46.5 inch at its widest point | 3/16 inch thick steel plate | 3/4 inch thick laser cut d-ring mounts that pass through the bumper and are welded both inside and out | Includes all the necessary mounting hardware | Sold as each Will Not work with Teraflex S/T Dual rate front sway bar | The outer edge of the crash bar will need to be trimmed to fit where the lower portion of the bumper mounts | The 8 factory mounting holes may need to be open up to a 9/16". | Ships bare metal and will need to be painted or powdercoated once you receive it
ClassificationId15709271
ColorSilver
Compatible_with_vehicle_typeOff-Road
Currency, CurrencyCodeUSD
DisplayNameBumpers
Exterior_finishMetallic Finish
Fit_typeVehicle Specific
Height12.0 12.00 1200 1512 336 375 50 500 56 75
IsAdultProducttrue
ItemClassificationBASE_PRODUCT
ItemName, Item_name, TitleCRUSHER SERIES FRONT BUMPER THAT FITS JEEP JK/JKU
Item_type_keywordautomotive-bumpers
KeywordMB2060
Length48.0 48.00
Linkhttps://m.media-amazon.com/images/I/31KloESs1AL._SL75_.jpg https://m.media-amazon.com/images/I/31KloESs1AL.jpg https://m.media-amazon.com/images/I/31fYQa4d1SL._SL75_.jpg https://m.media-amazon.com/images/I/31fYQa4d1SL.jpg https://m.media-amazon.com/images/I/41v-Fa1DiSL._SL75_.jpg https://m.media-amazon.com/images/I/41v-Fa1DiSL.jpg https://m.media-amazon.com/images/I/519LRWLoxJL._SL75_.jpg https://m.media-amazon.com/images/I/519LRWLoxJL.jpg https://m.media-amazon.com/images/I/519VGXfYgEL._SL75_.jpg https://m.media-amazon.com/images/I/519VGXfYgEL.jpg https://m.media-amazon.com/images/I/51Nm4dObk-L._SL75_.jpg https://m.media-amazon.com/images/I/51Nm4dObk-L.jpg https://m.media-amazon.com/images/I/713Rze1pXEL.jpg https://m.media-amazon.com/images/I/915uvDhKx-L.jpg
Material, MaterialTypeAlloy Steel
ProductGroup, WebsiteDisplayGroupNameAutomotive Parts and Accessories
ProductType, ProductTypeNameVEHICLE_BUMPER
Product_descriptionThe Motobilt Crusher Series recessed winch bumper will provide you the ultimate in protection and recovery for your JK and JKU. The bumper allows you to secure your winch down low in between the frame rails. The high clearance design includes a built in skid plate also. The bumper is made from 3/16 inch thick steel plate that is laser cut at Motobilt HQ then cnc bent. The bumper uses 3/4 inch thick laser cut d-ring mounts that pass through the bumper and are welded both inside and out. This setup provides for superior strength.
Product_site_launch_date2018-10-15T07:00:00.000Z
URLhttps://m.media-amazon.com/images/I/31KloESs1AL._SL75_.jpg
Unitinches
Unitsinches pixels
VariantMAIN PT01 PT02 PT03 PT04 PT05
WebsiteDisplayGroupautomotive_display_on_website
Width12.0 12.00 1600 2016 500 75

Distributor offers

SellerSKUMOQIn stockMultiplePrices
lmperformance.com001576615111 @ $650.35

Related on Amazon

As an Amazon Associate, we earn from qualifying purchases. (paid link) CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON. THIS CONTENT IS PROVIDED 'AS IS' AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.

CRUSHER SERIES FRONT BUMPER THAT FITS JEEP JK/JKU
Brand: Motobilt
The Motobilt Crusher Series recessed winch bumper will provide you the ultimate in protection and recovery for your JK and JKU. The bumper allows you to secure your winch down low in between the frame rails. The high clearance design includes a built in skid plate also. The bumper is made from 3/16 inch thick steel plate that is laser cut at Motobilt HQ then cnc bent. The bumper uses 3/4 inch thick laser cut d-ring mounts that pass through the bumper and are welded both inside and out. This setup provides for superior strength.
Details
  • Fits JK/JKU
  • Measures in at just 46.5 inch at its widest point | 3/16 inch thick steel plate | 3/4 inch thick laser cut d-ring mounts that pass through the bumper and are welded both inside and out | Includes all the necessary mounting hardware | Sold as each
  • Will Not work with Teraflex S/T Dual rate front sway bar | The outer edge of the crash bar will need to be trimmed to fit where the lower portion of the bumper mounts | The 8 factory mounting holes may need to be open up to a 9/16". | Ships bare metal and will need to be painted or powdercoated once you receive it
  • 2012 and newer models will need a vacuum relocation pump PN MB2060. The factory bracket must be cut off in order for the winch plate to fit. | Fairlead spacer included to allow use of a centered or off set winch design. | Does NOT work with Super Winch EXP
Listing
Product groupAutomotive Parts and Accessories
Product typeVEHICLE_BUMPER
Part numberMB1011
Items per pack1
LabelMotobilt
ManufacturerMotobilt
Analytics
Case Qty1 units
View on Amazon (paid link)