Motobilt Jeep JK Rear Bolt-On D-Ring Mounts 07-18 Wrangler JK - MB2072

They do require trimming the frame rail off flush to the rear cross member. If you ever decide to mount a full bumper the trimming does not remove any vital material from the frame and will allow for change in the future if you decide. These Rear Shackles were designed with strength in mind. The shackle mount features a massive 3/4 inch thick steel plate that extends all the way into the frame with (2) 3/4 inch bolts passing all the way through the frame to capture it. The kit is shipped bare metal so you will need to paint or powdercoat to the color of your choice. The hardware required to install them is included with the part. 4 x 3/4 inch grade 8 bolts, flat washers, and fabricated nuts. Features: ○ Rear Bolt on D- Ring Mounts are designed to fit JK and JK Unlimited ○ 3/4 inch thick high strength steel plate ○ (2) 3/4 inch bolts passing all the way through the frame ○ Hardware included ○ Sold as pair. Note: ○ Ships bare metal so you will need to paint or powder coat to the color of your choice