Muxlab Poe Transmitter, 4.5W, Hdmi 1.4, 300Mhz - 500763-TX

The Muxlab 500763TX HDMI over IP H264H265 PoE Transmitter allows HDMI source equipment to be extended locally up to 330ft 100m at up to 4K 30Hz resolution via Cat5e6 cable and is compatible with the Muxlab 500762RX Receiver to support pointtopoint pointtomultipoint and multipointto multipoint configurations Video Wall and Multiview capabilities in a low bandwidth flexible expandable and cost effective manner without the need to install dedicated cabling systems The exceptionally low bandwidth requirements of this device combination allows for streaming audiovideo content over a local network over WiFi and over the Internet for distributed installations spreadout throughout the globe The transmitter accepts a 4K video 30Hz and streams the content to an H264H265 Receiver such as the MuxLab 500762RX to be displayed on a 4K monitor The Transmitter may also send H264H265 video streams to other H264H265 compatible Receiving devices The device supports PoE PD and may be powered by a PoE PSE Ethernet Switch Features. Works with the 500762RX Receiver to support Matrix connectivity Video Wall and Multiview capabilities. Extends local audiovideo transmission up to 330ft 100m over Cat5e6. H264265 video codec excellent for LAN WiFi Internet transmission. High image quality and 200ms latency in low latency mode with H265. Supports 100s of TX RX devices depending on network bandwidth. Supports Multicast RTSP RTMP HLS FLV and TS. Supports embedding of 2CH audio. RS232 and Directional IR for remote control of enddevices. PoE powered via PoE PSE Ethernet SwitchSpecifications. Environment HDMI 14. Devices BluRay Set Top Boxes Media PlayersStreamers projectors monitors TVs PCs supporting HDMI. Signal ProtocalStandard HDMI 14 and HDCP 14. Weight 1 lbs