The Muxlab <b>500771-RX</b> KVM DVI Over IP PoE Extender allows DVI & USB equipment to be connected up to 330ft (100m) up to 1080p resolution @ 60Hz and 1920x1200 @ 60Hz via one (1) Cat5e/6 unshielded twisted pair cable in a point-to-point configuration. The Transmitter (500771-TX) and Receiver also support PoE (PD) if used with a PoE (PSE) Ethernet Switch.</p><p>For multiple point-to-point (including point-to-multipoint) configurations the Ethernet Switch must have Gigabit ports, Jumbo Frame capability and DHCP Server capability. MuxLab recommends using the Cisco SG300 Series Managed Switches.</p><p>The MuxLab ProDigital Network Controller (MUX-500811) is available to simplify the configuration and utilization of the 500771 and other MuxLab IP based products via an Ethernet web interface.</p><p><strong><ins>Applications:</strong></ins><br /><li>Management of multi-server systems supporting DVI displays in IT</li><li>Departments within corporations</li><li>Educational institutions</li><li>CAD Design</li><li>Graphic Design</li><li>Media</li><li>Servers and Data Centers.</li></p>