Buy the MXR M237, DC Power Brick at Full Compass Systems. 0% Financing and Free Shipping on thousands of items!

M237 Dunlop DC BRICK

MXR M237 DC BRICK Power Supply "M237 DC Brick" is a power supply that can supply power in bulk to the effect system, including also third-party effector of course MXR product. Eight DC9V output, DC18V output is equipped with two. There is a protection against overload and short circuit in the output of the individual, it will be obvious failure is happening anywhere in the output (only DC9V output) in the LED of eight when the malfunction occurs. Since there 2,000mA output capacity, you can use it with confidence in the system, including digital equipment. Please check your current capacity, the rated voltage (outside of the plug this product +) polarity of the power supply of the effector of accessories ※ connected × 10 lines: DC cable and a dedicated 18V AC adapter (SL about 62cm / plug shape). Pin is common 18V and 9V. Depending on the device, you might rarely, it is not possible to use the AC adapter in common by the specification of the internal power supply connection. Moreover, it is 2A in total, but can not be used for equipment that current capacity exceeds 1.2A alone.