01-910-00027 Netbell | Industrial Automation and Controls | DigiKey Marketplace

The Netbell-2-2Bel is a one-stop solution for schools, offices and small shops to build an automatic, IP enabled, break bell system to signal class changes, shift rotations, breaks, general alarm and any other timed signal applications. This kit includes one Netbell-2 web-based bell controller and two signal bells (6 inch 86dB - each bell can cover up to 8000 sqf office area at a normal ambient noise level). Bells have weatherproof back boxes for wall mounting, two 12VDC power supplies, and two 10ft pieces of power wires - to connect bells to the controller. Bells can be wired to the Netbell-2 controller at up to 250 ft away with 18AWG wire (up to 500 ft/16AWG). You will have everything needed for installation and operation, the only thing you will need to get are wire extensions, depending on how long run you need. The Netbell-2 web-based bell controller is built on a TCP/IP platform with a built-in web server and special software, designed for bells scheduling. With the built-in web interface you can access, control and schedule bells over a network or via the Internet, no additional software or designated PC required. You can connect up to 2 push switches (not included with this kit) for ringing bells manually, in case of emergency.

Netbell-2-2Bel is a one-stop solution for school, office or shop environment, up to 12-16000 sft, to build an automatic, IP enabled break bell system for signaling class changes, shift rotations, breaks and any other timed signal applications. The kit includes one Netbell-2 networked bell controller, two signal bells (6 inch 86dB that each can cover up to 6-8000 sqf area at a normal ambient noise level) mounted on weatherproof back boxes, two 12VDC power supplies to power the bells, two 10-foot two-conductor wires. Bells have to be wired to the Netbell-2 controller with these wires. You may choose to use longer wires sourced locally. Each bell can be wired at up to 250 feet away from the controller with 18AWG cable (or up to 500 feet with 16AWG cable). The Netbell-2 web-based bell controller is built on a TCP/IP platform with a built-in software designed for scheduling bell system. With this software, you can access, control and schedule bells over the network or via the Internet, using any browser, no need to have a designated PC or central station. You can expand your system and have multiple Netbell systems in separate buildings across your network. Our specially designed, free and easy-to-use BellScheduler desk app, allows to manage & schedule multiple Netbell devices in a few clicks, from one screen. You can wire up to 2 push switches (sold separately) to the Netbell-2, for manual activation of the bells in case of emergency.