Tapered Roller Bearing Cone, Bearing Industry Number L68149V1, Bore Diameter 1 3/8 in, Bore Type Cylindrical, Cage Material Pressed Steel, Compatible Cup Grainger Part Number 1YTW4, Compatible Cup Manufacturer Part Number L68110, L68111, Cone Width 0.78 in, Maximum Temperature 250 Degrees F, Minimum Temperature -40 Degrees F, Number of Rows One, Outside Diameter 2.205 in, Ring Material Alloy Steel, Roller Material Alloy Steel, System of Measurement Inch

<p> This tapered roller bearing cone is designed to carry a maximum combination of radial and thrust loads simultaneously. It features roller guiding inner ring construction. The roller bearing cone features a steel cage and is nonlubricated. Use in lower-speed applications where there is a high degree of thrust or radial load, shock loads, and/or alternating thrust and radial loads. Note: When replacing bearings, replace both cone and cup to ensure optimum performance and longer life.</p><p><b>Specification: </b><ul><li>Item: Taper Roller Bearing Cone</li><li>Type: Inch Series</li><li>Bore Dia. (In.): 1.378</li><li>Cone Width: 0.660"</li><li>Dynamic Load Capacity (Lb.): 8000</li><li>Static Load Capacity (Lb.): 10,700</li><li>Temp. Range (F): -20F - 250</li><li>Cage Material: Steel</li><li>Raceway: Steel (G4104)</li><li>Lubrication: Not Lubricated</li><li>For Use With: 1YTW4 Taper Roller Bearing Cup</li><li>Agency Compliance: ABMA</li></ul></p>