Circulating Oil, Premium, DTE Heavy Medium, 5 Gallon, Viscosity Index 95, ISO Viscosity Grade 68, Viscosity 95 cSt @ 40 C, Viscosity 8.7 cSt @ 100 C, Flash Point 223 C, Pour Point -15 C), Amber, For Land Based and Marine Steam Turbine, Hydro Turbine and Some Gas Turbine Circulation Systems, Including Pumps, Valves, Continuous Service Plain and Roller Bearings and Parallel Shaft Gearing, Moderate Severity Hydraulic Pumps, Compressors and Vacuum Pumps, DIN 51515-1, DIN 51517, DIN 51524
Hydraulic Oil, Anti Wear, DTE 10 Excel 32, 5 Gallon, Viscosity Index 164, ISO Viscosity Grade 32, Viscosity 32 cSt @ 40 C, Viscosity 6.1 cSt @ 100 C, Flash Point 210 C, Pour Point -45 C), Amber, For Systems Containing Gears and Bearings Where Cold Start Up and High Operating Temps Are Typical, High Pressure Vane, Piston and Gear Pumps, Vickers I-286-S, Vickers M-2950-S
Hydraulic Oil, ISO Viscosity Grade 32, SAE Grade 10W, Base Oil Mineral, Container Size 400 lb., Lubricant NSF Rating Not Rated, Lubricant Additives No Additives, Min. Operating Temp. 0 Degrees F, Max. Operating Temp. 150 Degrees F, Viscosity Index 99, Flash Point 430 Degrees F, Pour Point -33 Degrees F, Container Type Drum, Color Amber, Standards ISO 32, Application Hydraulic Systems, Four-Ball Wear 0.50mm
Hydraulic Oil, ISO Viscosity Grade 46, SAE Grade 20W, Base Oil Mineral, Container Size 35 lb., Lubricant NSF Rating Not Rated, Lubricant Additives No Additives, Min. Operating Temp. -12 Degrees F, Max. Operating Temp. 150 Degrees F, Viscosity Index 99, Flash Point 432 Degrees F, Pour Point -27 Degrees F, Container Type Pail, Color Amber, Standards ISO 46, Application Hydraulic Systems, Four-Ball Wear 0.50mm
Hydraulic Oil,Size 5 gal.,Container Type Pail,SAE Grade Not Specified,ISO Viscosity Grade 46,Viscosity Index 141,Temp. Range -,Pour Point -42 Degrees C,Flash Point 216 Degrees C,Dropping Point Not Speficied,Four-Ball Wear Not Specified,Timken OK Load Not Specified,Viscosity @ 40C 46 cSt ,Viscosity @ 100C 7.86 cSt,Application For Systems Containing Gears and Bearings Where Cold Start Up and High Operating Temps Are Typical, High Pressure Vane, Piston and Gear Pumps