AttributeKey03: Application (Page 9)

Gasket Remover, Container Type Aersol Can, For Use on Adhesive Type Gaskets, Standards NSF C3 Registered, Base Solvent, Features Solvent-Based; No Methylene Chloride

Gasket Sealant, Color Clear, Container Size 6.5 oz, Container Type Tube, Full Cure Time 1 day, Cure Type Room Temperature, Maximum Operating Temperature 400 Degrees F, Minimum Operating Temperature -70 Degrees F, Series RTV Silicone, Working Time 10 min, Product Form Paste, For Fluid Type Water, Resistance Properties Water Resistant, Standards 29 CFR 1910.1200, Chemical Base RTV Silicone, Flash Point 212 Degrees F, Includes Nozzle

Gasket Sealant, Color Red, Container Size 6.5 oz, Container Type Tube, Full Cure Time 1 day, Cure Type Room Temperature, Maximum Operating Temperature 400 Degrees F, Minimum Operating Temperature -50 Degrees F, Series RTV Silicone, Working Time 10 min, Product Form Paste, For Fluid Type Water, Resistance Properties Non-Corrosive, Water Resistant, Standards ASTM C920, MIL-A-46106B, TT-S-001543A Class A, TT-S-0230C Type 2 Class A, Chemical Base RTV Silicone, Features Low Odor, Non-Corrosive

GEAR OIL, 80W90, HEAVY-DUTY GEAR, FLASHPOINT 446

General Purpose Scoop, 48 In.L, Aluminum

GOLD 5" 5 Hole Grip Vacuum Disc P120 Grit, 50 Discs/Box

GOLD 5" 5 Hole Grip Vacuum Disc P180 Grit, 50 Discs/Box

GOLD 5" 5 Hole Grip Vacuum Disc P220 Grit, 50 Discs/Box

GOLD 5" 5 Hole Grip Vacuum Disc P80 Grit, 50 Discs/Box

GOLD 5" 8 Hole Grip Vacuum Disc P100 Grit, 50 Discs/Box

GOLD 5" 8 Hole Grip Vacuum Disc P120 Grit, 50 Discs/Box

GOLD 5" 8 Hole Grip Vacuum Disc P150 Grit, 50 Discs/Box

GOLD 5" 8 Hole Grip Vacuum Disc P180 Grit, 50 Discs/Box

GOLD 5" 8 Hole Grip Vacuum Disc P220 Grit, 50 Discs/Box

GOLD 5" 8 Hole Grip Vacuum Disc P320 Grit, 50 Discs/Box

GOLD 5" 8 Hole Grip Vacuum Disc P60 Grit, 50 Discs/Box

GOLD 5" 8 Hole Grip Vacuum Disc P80 Grit, 50 Discs/Box

GOLD 6" 6 Hole Grip Vacuum Disc P100 Grit, 50 Discs/Box

GOLD 6" 6 Hole Grip Vacuum Disc P120 Grit, 50 Discs/Box

GOLD 6" 6 Hole Grip Vacuum Disc P80 Grit, 50 Discs/Box

Grand Checker | MIZUSHIMA | MISUMI

Grease, Cartridge, 14 oz.

Ground Connector,Lay-In,4-14AWG,DB Rated

Hand Cleaner, Waterless, 1 pt.

High Temperature Grease, 13.7 Oz., NSF H1

Honda Scanner Cable, For MS5950, MS6050

HSDL-3002#007

HSDL-3202-021

IEI Linear USB-SERIAL USB to Serial Converter, White

Industrial Caster, STC Series, Free Stopper (SW-4) Included | Nanshin | MISUMI

INTERNAL THREAD REPAIR, 12 MM TO 16 MM, 1/2 IN TO 5/8 IN, 1/4 IN TO 3/8 IN, STEEL

INTERNAL THREAD REPAIR, 16 MM TO 20 MM, 11/16 IN TO 13/16 IN, 3/8 IN TO 1/2 IN, STEEL

INTERNAL THREAD REPAIR, 22 MM TO 32 MM, 7/8 IN TO 1 1/4 IN, 12 IN TO 7/8 IN, 5 3/8 IN, STEEL

INTERNAL THREAD REPAIR, 32 MM TO 54 MM, 1 1/4 IN TO 2 1/8 IN, 7/8 IN TO 1 3/4 IN, STEEL

INTERNAL THREAD REPAIR, 32 MM TO 68 MM, 1 1/4 IN TO 2 5/8 IN, 7/8 IN TO 2 1/4 IN, STEEL

Introducing the 4th Generation MrCool DIY 27K BTU 3-Zone Ductless Heat Pump Condenser which is one of the most capable heat pumps on the market. When this 3-zone condenser is matched with select MrCool air handlers, it can produce a highly effective 22 SEER efficiency rating. It can also provide heating performance all the way down to -13F. With its Gold Fin condenser coating, it is sure to withstand the seasons. To drive home the quality of this condenser, MrCool is the only manufacturer to offer a limited lifetime compressor warranty. The cornerstone of this heat pump is its ability to be a Do-It-Yourself project for a homeowner. When used with MrCool?s patented Pre-Charged Quick Connect Line Set, the refrigerant piping can be connected with simple hand tools and does not require the services of a certified technician. It comes pre-charged with the correct amount of R-410A refrigerant so, once installed, it does not require vacuuming. Allow the capability, performance, and simplicity of a DIY installation of the 4th Generation MrCool DIY 27K BTU 3-Zone Ductless Heat Pump Condenser to be your only choice for your home?s heating and cooling. This model comes with two 12k air handlers and two 25' line sets.

Knit Gloves, ANSI/ISEA Cut Level 4, ANSI/ISEA Abrasion Level Not Rated, Standards ANSI/ISEA 105 Heat Level 6, 1 Pair

Long Vinyl Mat (D-Convex / Roll Type) | MIZUSHIMA | MISUMI

Long Vinyl Mat (Pyramid / Roll Type) | MIZUSHIMA | MISUMI

Machine Tool Wire (MTW), 1 AWG, 2/64 Stranded Conductor, Black, R | Crescent Electric Supply Company

Machine Tool Wire (MTW), 10 AWG, 2/64 Stranded Conductor, Black, | Crescent Electric Supply Company

Machine Tool Wire (MTW), 10 AWG, 2/64 Stranded Conductor, Blue, 2 | Crescent Electric Supply Company

Machine Tool Wire (MTW), 10 AWG, 2/64 Stranded Conductor, Blue/Wh | Crescent Electric Supply Company

Machine Tool Wire (MTW), 10 AWG, 2/64 Stranded Conductor, Green/Y | Crescent Electric Supply Company

Machine Tool Wire (MTW), 10 AWG, 2/64 Stranded Conductor, Orange, | Crescent Electric Supply Company

Machine Tool Wire (MTW), 10 AWG, 2/64 Stranded Conductor, Yellow, | Crescent Electric Supply Company

Machine Tool Wire (MTW), 12 AWG, 2/64 Stranded Conductor, Black, | Crescent Electric Supply Company

Machine Tool Wire (MTW), 12 AWG, 2/64 Stranded Conductor, Blue, 2 | Crescent Electric Supply Company

Machine Tool Wire (MTW), 12 AWG, 2/64 Stranded Conductor, Blue/Wh | Crescent Electric Supply Company

Machine Tool Wire (MTW), 12 AWG, 2/64 Stranded Conductor, Gray, 5 | Crescent Electric Supply Company

Machine Tool Wire (MTW), 12 AWG, 2/64 Stranded Conductor, Green, | Crescent Electric Supply Company

Machine Tool Wire (MTW), 12 AWG, 2/64 Stranded Conductor, Green/Y | Crescent Electric Supply Company