AttributeKey03: Item

Products with this attribute (12370 total)

Pond Light, Compatible Manufacturer Part Number Not Applicable, Cord Length 25 ft, Includes Removable Mounting Stake, Swivel Base, Lighting Technology LED, Nameplate Voltage 12V AC, Number of Lights 1, Power Consumption 3 W, Features Safe and Easy Operation Above and Below the Water and Can Connect up to Four Spotlights for Maximum Effect, Spotlight for Pleasant Warm White Light Accents, The Adjustable Head for Alignment of the Beam Angle Provides Additional Flexibility

Pool and Spa Pump Motor, Finish Black, Frame 56Y, Hz 60, Full Load Amps 10.0, HP 2, Ins. Class B, Max. Ambient Temp. 50 Degrees C, Motor Application Pump, Motor Bearings Ball, Motor Design Permanent Split Capacitor, Motor Efficiency Group Standard Efficient, Motor Enclosure Design Open Dripproof

Poster Board Colored 4-Ply,28"x22",PK25

Poster Board,4-Ply,22x28,Brown,PK25

Poster Board,4-Ply,28"x22",White,PK25

Poster Board,4-Ply,Assorted,28x22,Package Quantity100

PosterBoard,Colord4Ply,28"x22",Orng,PK25

PosterBoard,Colord4Ply,28"x22",Yllw,Package Quantity25

PosterBoard,Colored4Ply,28"x22",Blk,PK25

Power Cord,50 ft.

Power Distribution Block (2) 2/0-14 AWG Primary(12) 4-14 AWG Secondary Power Distribution Blocks are made of high strength, high-conductivity aluminum alloy and are mounted in a high-strength glass-filled polyester base. Each block can stand alone or combine with other blocks to form a multi-block set.

Power Distribution Block (2) 350 MCM-6 AWG Primary (12) 4-14 AWG Secondary Power Distribution Blocks are made of high strength, high-conductivity aluminum alloy and are mounted in a high-strength glass-filled polyester base. Each block can stand alone or combine with other blocks to form a multi-block set.

Practice Paper,Newsprint,8.5x11",PK500

Pre-Insulated Service Entry Sleeves 1/0 - 2 Str Pre-insulated service entry sleeves are used for fast and easy installation with standard tools. For combinations of aluminum-aluminum and aluminum-copper conductors. Meets the requirements of ANSI C119.4. Rated 600 Volts.

Pre-Insulated Service Entry Sleeves 2/0 - 2/0 Str Pre-insulated service entry sleeves are used for fast and easy installation with standard tools. For combinations of aluminum-aluminum and aluminum-copper conductors. Meets the requirements of ANSI C119.4. Rated 600 Volts.

Pre-Insulated Service Entry Sleeves 4/0 - 3/0 Str Pre-insulated service entry sleeves are used for fast and easy installation with standard tools. For combinations of aluminum-aluminum and aluminum-copper conductors. Meets the requirements of ANSI C119.4. Rated 600 Volts.

Pre-Insulated Service Entry Sleeves 4/0 - 4/0 Str Pre-insulated service entry sleeves are used for fast and easy installation with standard tools. For combinations of aluminum-aluminum and aluminum-copper conductors. Meets the requirements of ANSI C119.4. Rated 600 Volts.

Premium S/PDIF (Toslink) Digital Optical Audio Cable_ 18"

Pressure Gauge, 1.5 in. ABS Case, Copper Alloy Internals, 200 psi/kg/cm2, 1/8 NPT Back Conn

Pressure Gauge, 1.5 in. ABS Case, Copper Alloy Internals, 30 psi/kg/cm2, 1/8 NPT Male Bottom Conn

Pressure Gauge, 1.5 in. ABS Case, Copper Alloy Internals, 30 psi/kPa, 1/8 NPT Male Right Conn

Pressure Gauge, 2 in. ABS Case, Copper Alloy Internals, 30 psi/bar, 1/4 NPT Back Conn

Pressure Gauge, 2 in. Steel Panel Mount Case, 30 psi/kPa, 1/4 NPT Back Conn, Glass Lens

Pressure Gauge, 2.5 in. 304SS Case, 316SS Internals, 1000 psi, 1/4 NPT Male Bottom Conn

Pressure Gauge, 2.5 in. 304SS Case, 316SS Internals, 10000 psi/kg/cm2, 1/4 NPT Male Bottom Conn

Pressure Gauge, 2.5 in. 304SS Case, 316SS Internals, 200 psi/kg/cm2, 1/4 NPT Male Bottom Conn

Pressure Gauge, 2.5 in. 304SS Case, 316SS Internals, 30 psi, 1/4 NPT Male Bottom Conn, SS Tagging

Pressure Gauge, 2.5 in. 304SS Case, 316SS Internals, 6000 psi/kPa, 1/4 NPT Male Back Conn

Pressure Gauge, 2.5 in. 304SS Case, Copper Alloy Internals, 2000 psi/kPa, 7/16-20 Male Bottom Conn, Glycerin Filled, Safety Glass. High quality liquid filled gauge. Vacuum and compound ranges through 0 psi to 15,000 psi. Impact resistant ABS and Stainless Steel case. Copper alloy and Brass wetted parts. Cleaning for Oxygen Service O2 is available only for dry or HL Halocarbon filled gauges. For gauges with MIP, GY40 fill is standard for liquid filled gauges.

Pressure Gauge, 2.5 in. 304SS Case, Copper Alloy Internals, 30/30 psi/kPa, 1/4 NPT Male Bottom Conn, Glycerin Filled. High quality liquid filled gauge. Vacuum and compound ranges through 0 psi to 15,000 psi. Impact resistant ABS and Stainless Steel case. Copper alloy and Brass wetted parts. Cleaning for Oxygen Service O2 is available only for dry or HL Halocarbon filled gauges. For gauges with MIP, GY40 fill is standard for liquid filled gauges.

Pressure Gauge, 2.5 in. ABS Case, Copper Alloy Internals, 100 psi/bar, 1/4 NPT Back Conn

Pressure Gauge, 2.5 in. ABS Case, Copper Alloy Internals, 100 psi/bar, 1/4 NPT Male Bottom Conn

Pressure Gauge, 2.5 in. ABS Case, Copper Alloy Internals, 160 psi/kPa, 1/4 NPT Male Bottom Conn

Pressure Gauge, 2.5 in. ABS Case, Copper Alloy Internals, 30 psi/kg/cm2, 1/4 NPT Back Conn

Pressure Gauge, 2.5 in. ABS Case, Copper Alloy Internals, 3000 psi/kPa, 1/4 NPT Male Bottom Conn, Glycerin Filled, 0.3mm Brass Press Fit Orifice. High quality liquid filled gauge. Vacuum and compound ranges through 0 psi to 15,000 psi. Impact resistant ABS and Stainless Steel case. Copper alloy and Brass wetted parts. Cleaning for Oxygen Service O2 is available only for dry or HL Halocarbon filled gauges. For gauges with MIP, GY40 fill is standard for liquid filled gauges.

Pressure Gauge, 2.5 in. Brass Case, Copper Alloy Internals, 1000 psi, 7/16 in. -20 Male Bottom Conn, Glycerin Fill, 0.8mm Brass Threaded Orifice. High quality, heavy-duty liquid filled gauge. Vacuum and compound ranges through 0 psi to 15,000 psi. Die cast Brass case with natural Brass finish. Copper alloy or 316 Stainless Steel and Brass wetted parts. Cleaning for Oxygen Service O2 is available only for dry or HL Halocarbon filled gauges. For gauges with MIP, GY40 fill is standard for liquid filled gauges.

Pressure Gauge, 2.5 in. Brass Case, Copper Alloy Internals, 5000 psi/kPa, 1/4 NPT Male Back Conn, Glycerin Filled, Chrome Bezel & U-Clamp. High quality, heavy-duty liquid filled gauge. Vacuum and compound ranges through 0 psi to 15,000 psi. Die cast Brass case with natural Brass finish. Copper alloy or 316 Stainless Steel and Brass wetted parts. Cleaning for Oxygen Service O2 is available only for dry or HL Halocarbon filled gauges. For gauges with MIP, GY40 fill is standard for liquid filled gauges.

Pressure Gauge, 2.5" 304SS Case, 316SS Internals, 160 psi/bar, 1/4 NPT Male Back Conn, 304SS Panel Mount Clamp

Pressure Gauge, 2.5" 304SS Case, 316SS Internals, 200 psi, 1/4 NPT Male Back Conn, Glycerin Filled, 304SS Flange Ring, 304SS Panel Mount Clamp

Pressure Gauge, 2.5" 304SS Case, 316SS Internals, 5000 psi/kPa, 1/4 NPT Male Back Conn, Glycerin Filled, 304SS Front Flange

Pressure Gauge, 2.5" 304SS Case, 316SS Internals, 60 psi, 1/4 NPT Male Back Conn, Glycerin Filled, 304SS Flange Ring

Pressure Gauge, 2.5" 304SS Case, 316SS Internals, 60 psi/bar, 1/4 NPT Male Bottom Conn, Glycerin Filled, SS Tagging

Pressure Gauge, 2.5" 304SS Case, Copper Alloy Internals, 160 psi/kPa, 1/4 NPT Male Bottom Conn, Glycerin Filled, 0.1 mm Brass Press Fit Orifice

Pressure Gauge, 2.5" 304SS Case, Copper Alloy Internals, 5000 psi/bar, 1/4 NPT Male Back Conn, Dry Gauge

Pressure Gauge, 2.5" Brass Case, Copper Alloy Internals, 600 psi/bar, 1/4 NPT Male Back Conn, Glycerin Filled, 0.8mm Brass Threaded Orifice

Pressure Gauge, 4 in. 304SS Case, 316SS Internals, 15 psi/kPa, 1/2 NPT Male Back Conn

Pressure Gauge, 4 in. 304SS Case, 316SS Internals, 200 psi, 1/4 NPT Male Back Conn, Glycerin Filled

Pressure Gauge, 4 in. 304SS Case, 316SS Internals, 3000 psi/kPa, 1/2 NPT Male Bottom Conn

Pressure Gauge, 4 in. 304SS Case, 316SS Internals, 5000 psi, 1/4 NPT Male Back Conn

Pressure Gauge, 4 in. 304SS Case, 316SS Internals, 5000 psi/kg/cm2, 1/2 NPT Male Bottom Conn

Pressure Gauge, 4 in. 304SS Case, 316SS Internals, 600 psi/kPa, 1/2 NPT Male Bottom Conn, -40 Degree Service Filled. Corrosion-resistant fillable dry or liquid-filled gauge. Vacuum and compound ranges through 0 psi to 20,000 psi. 316 Stainless Steel wetted parts. Cleaning for Oxygen Service O2 is available only for dry or HL Halocarbon filled gauges.

Pressure Gauge, 4 in. ABS Case, Copper Alloy Internals, 1500 psi/kPa, 1/4 NPT Male Bottom Conn

Pressure Gauge, 4 in. Black Steel Case, Copper Alloy Internals, 160 psi/kPa,1/4 NPT Male Bottom Conn

Pressure Gauge, 4" 304SS Case, 316SS Internals, 5000 psi, 1/2 NPT Male Back Conn, Glycerin Filled, 304SS Bezel & U-Clamp

Pressure Gauge, 4" 304SS Case, 316SS Internals, 5000 psi, 1/2 NPT Male Back Conn, Glycerin Filled, 304SS Front Flange, 0.8mm 316SS Threaded Orifice

Pressure Gauge, 6 in. 304SS Case, 316SS Internals, 100 psi/bar, 1/2 NPT Male Back Conn

Pressure Gauge, 6 in. 304SS Case, 316SS Internals, 160 psi, 1/2 NPT Male Back Conn

Pressure Gauge, 6 in. 304SS Case, 316SS Internals, 300 psi, 1/2 NPT Male Bottom Conn, Glycerin Filled. Corrosion-resistant fillable dry or liquid-filled gauge. Vacuum and compound ranges through 0 psi to 20,000 psi. 316 Stainless Steel wetted parts. Cleaning for Oxygen Service O2 is available only for dry or HL Halocarbon filled gauges. For gauges with MIP, GY40 fill is standard for liquid filled gauges.

Pressure Gauge, 6 in. 304SS Case, 316SS Internals, 300 psi/bar, 1/2 NPT Male Back Conn

Pressure Gauge, 6 in. 304SS Case, 316SS Internals, 300 psi/bar, 1/2 NPT Male Bottom Conn

Pressure Gauge, 6 in. 304SS Case, 316SS Internals, 5000 psi/bar, 1/2 NPT Male Back Conn

Pressure Gauge, 6 in. 304SS Case, 316SS Internals, 60 psi/kg/cm2, 1/2 NPT Male Bottom Conn

Pressure Gauge, 6 in. 304SS Case, 316SS Internals, 60 psi/kPa, 1/2 NPT Male Bottom Conn

Pressure Gauge,1.5 in. ABS Case,30 psi/kPa,1/8 NPT Male Back Conn,Glycerin Filled

Pressure Gauge,1.5 in. ABS Case,60 psi/kPa,1/8 NPT Back Conn,Chrome Front Flange

Pressure Gauge,2 in. ABS Square Panel Mount Case,30 psi/kPa,1/8 NPT Male/10-32 Female Back Conn

Pressure Gauge,2.5 in. 304SS Case,100 psi/kPa,1/4 NPT Male Back Conn,Dry Gauge,Panel Mount Clamp

Pressure Gauge,2.5 in. 304SS Case,1000 psi/bar,1/4 NPT Male Back Conn,Panel Mount Clamp

Pressure Gauge,2.5 in. 304SS Case,1000 psi/kPa,1/4 NPT Male Bottom Conn,-40 Deg Service Filled

Pressure Gauge,2.5 in. 304SS Case,1000 psi/kPa,1/4 NPT Male Bottom Conn,-40 Degree Service Fill

Pressure Gauge,2.5 in. 304SS Case,10000 psi/bar,1/4 NPT Male Bottom Conn,Glycerin Filled

Pressure Gauge,2.5 in. 304SS Case,10000 psi/kg/cm2,1/4 NPT Male Back Conn,Glycerin Filled

Pressure Gauge,2.5 in. 304SS Case,15 psi/kPa,1/4 NPT Male Bottom Conn,Glycerin Filled

Pressure Gauge,2.5 in. 304SS Case,160 bar/psi,G1/4 Male Back Conn,Glycerin Filled,304SS Front Flange

Pressure Gauge,2.5 in. 304SS Case,160 psi/bar,1/4 NPT Male Back Conn,304SS Front Flange

Pressure Gauge,2.5 in. 304SS Case,200 psi,1/4 NPT Male Bottom Conn,Glycerin Filled,Safety Glass Lens

Pressure Gauge,2.5 in. 304SS Case,200 psi/kPa,1/4 NPT Male Back Conn,-40 Deg Service Fill

Pressure Gauge,2.5 in. 304SS Case,200 psi/kPa,1/4 NPT Male Back Conn,304SS Front Flange