AttributeKey05: Measurement System

Products with this attribute (36 total)

BLADE SPADE DRILL #2-1-1/16 T-15

Carbide End Mill Grade C2 Micro Grain List Number 204 General Purpose End Style Corner Radius End Single End Dimension Type Fractional Inch Diameter 5/8 In. Shank Dia 5/8 In. Length of Cut 1-1/4 In. Overall Length 3-1/2 In. Number of Flutes 2 Center Cutting Type Cutting Direction Right Hand Helix Angle 30 Degrees Corner Radius .090 In. Finish Uncoated

COLLET SEALED 1/2 ER40

CUTTER ANNULAR 1 X 3

CUTTER ANNULAR 1-1/2 X 3

CUTTER ANNULAR 1-1/4 X 3

CUTTER ANNULAR 1-1/8 X 3

CUTTER ANNULAR 1-3/4 X 3

CUTTER ANNULAR 2 X 3

CUTTER ANNULAR HSS 7/16X1IN

DBNYD5-10-MULTICOMP_IT

Dielectric Strength: Undetermined, Cleaner Container Type: Jug, Cleaner Container Size: 1 gal.; Item - Degreasers Cleaner, Chemicals For Use On Hard Nonporous Surfaces, Cleaner Container Type Jug, Cleaner Container Size 1 gal., Fragrance Unscented, Cleaner VOC Range Contains No VOC, Concentrated, Recommended Dilution 1:21 to 1:64, Cleaner NSF Rating Not Rated, Cleaner Form Liquid, Nonflammable Yes, Primary Chemical None, Chemical Series No Series, Equipment/Machinery, Cleaner Solvent Base Water Based, VOC Content 0 Percent, Flash Point None, Dielectric Strength Undetermined, Cleaner

DRILL BIT 37/64X12INHSS

Dwv copper coupling with stop 2", easy to use and handle. This products adds a great value this product is manufactured in United States.

Dwv elbow, 90 degrees, body material: wrot copper, connection type: c x c, tube size: 2", outside dia.: 2-1/8", Max. Pressure: 364 psi@100 degrees F, temp. Range: -20 degrees to 400 degrees F, standards: asme B16.29, ISO 9001 registered facility.

Epc pipe REDUCER, 1-1/4 x 1 in nominal size, ftg x copper, copper.

Features: Cherne 262218 21" Muni-Ball Plug 4" Bypass, 13 PSI, 30 FT Works in all types of pipe.Easily converts to an air test plug with use of a conversion kitDurable natural rubber construction seals the roughest of surfacesThreaded aluminum bypass.

Features: Cherne 265068 6"- 8" Muni-Ball Plug 1-1/2" Bypass, 17 PSI, 40 FT Works in all types of pipe.Easily converts to an air test plug with use of a conversion kitDurable natural rubber construction seals the roughest of surfacesThreaded aluminum bypass.

Features: Cherne 266035 Pillow-Style Muni-Ball Plug- 33", Urethane.Cherne's Pillow-Style Test-Ball and Muni-Ball plugs are great for blocking sewer flow and can also be used for sewer air testingMade from heavy-duty elastic urethane, these plugs are lightweight, flexible, chemical and petroleum-resistant, and will fit through small diameter openingsPillow-style plugs can be tethered with the attached tether bars, and will work in all types of pipe, including ductile iron sizesEquipped with a special 30' inflation hose, read-back line and gaugeA repair kit is available to fix small tears and puncturesMuni-Ball style plugs feature a bypass with threaded nipples on both ends

Features: Cherne 272957 8" T-Handle Gripper Plug 3/4" Bypass 17 PSI, 40FT, Aluminum.Can be used in long-term applicationsChemical-resistant neoprene O-ringMade of heavy-duty aluminumBypass can be used to conduct sewer air pressure test.

Features: Cherne 314728 48"-72" Muni-Ball Plug 6 PSI, 14 FT Smaller deflated diameter.Improved hardware for more strengthShorter lengthAdditional bypass sizes available20-40" and larger sizes feature patented, field-repairable rupture disc technology to eliminate over-inflation risk.

Jobber Drill Bit Fractional Inch Drill Bit Size 1/2 In. Decimal Equivalent 0.5000 Drill Bit Point Angle 140 Degrees Drill Bit Material Solid Carbide Drill Bit Finish AlTiN Shank Type Straight Flute Type Spiral Coolant Through No Cutting Direction Right Hand Overall Length 4 In. Grade C2 Sub-Micron Solid Carbide Shank Dia 1/2 In. Flute Length 2.000 In. Point Type Four Facet List Number 4xD Metalworking Number of Flutes 2 Depth x Dia Ratio 4xD

Jobber Drill Bit Fractional Inch Drill Bit Size 25/64 In. Decimal Equivalent 0.3906 Drill Bit Point Angle 140 Degrees Drill Bit Material Solid Carbide Drill Bit Finish AlTiN Shank Type Straight Flute Type Spiral Coolant Through No Cutting Direction Right Hand Overall Length 4 In. Grade C2 Sub-Micron Solid Carbide Shank Dia 25/64 In. Flute Length 1.563 In. Point Type Four Facet List Number 4xD Metalworking Number of Flutes 2 Depth x Dia Ratio 4xD

Jobber Drill Bit Metric Drill Bit Size 11.50mm Decimal Equivalent 0.4528 Drill Bit Point Angle 140 Degrees Drill Bit Material Solid Carbide Drill Bit Finish AlTiN Shank Type Straight Flute Type Spiral Coolant Through No Cutting Direction Right Hand Overall Length 100.00mm Grade C2 Sub-Micron Solid Carbide Shank Dia 11.50mm Flute Length 46.00mm Point Type Four Facet List Number 4xD Metalworking Number of Flutes 2 Depth x Dia Ratio 4xD

Jobber Drill Bit Metric Drill Bit Size 12.00mm Decimal Equivalent 0.4724 Drill Bit Point Angle 118 Degrees Drill Bit Material Solid Carbide Drill Bit Finish AlTiN Shank Type Straight Flute Type Spiral Coolant Through No Cutting Direction Right Hand Overall Length 121.00mm Grade C2 Sub-Micron Solid Carbide Shank Dia 12.00mm Flute Length 76.00mm Point Type Split Point List Number 450 Metalworking Number of Flutes 2 Depth x Dia Ratio 6xD

Oatey SCS 801-20-1 Dearborn Brass 20 ga Tubular Strainer Tailpiece, 1-1/2" x 8"

SDS Max Drill Bit,1-1/4x18x23in,4-Cutter, SDS Max, 1 1/4 in Drill Bit Size, 23 in Overall Length, Bright (Uncoated), Maximum Drilling Depth 18 in

Size:1 pack Mitutoyo Pocket Steel Rule, Length: Graduations: 6"/150mm (1/64"/1mm), Width: 1/2" Wide, Comment: With Pocket Clip

SK-5 Carbide Burr

Sonic Masonry Drill Bit,1/4x10x12in., 1/4 in Drill Bit Size, 12 in Overall Length, Bright (Uncoated), Maximum Drilling Depth 10 in, Shank Diameter 1/4 in

Style-A - 4\ FNPT x Male Adapter "

Universal Coupling - Male 1/4" NPT</p></ul><p><b></b></p><ul><b>WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov</b></ul><p></p>