Contact Cleaner and Protectant, Plastic Safe Yes, Plastic Compatibility Safe on Most Plastics, Container Type Aerosol Spray Can, Container Size 10 oz, Cleaner Form Liquid, Dielectric Strength 350V, VOC Content 71.85 Percent, NSF Rating K2, Product Series No Series, Nonflammable No, Product Label Contact Cleaner and Protectant, Chlorinated No, Standards NSF Rated, RoHS Compliant, Base Formula Chemical Based Solvent, Biodegradable No, Butyl Free No, Flash Point Less Than 0 Degrees F
Food Grade Lubricant and Sealant, Container Type Tube, Size 6 oz, Temp. Range -70 to 400 Degrees F, Flash Point Greater Then 500 Degrees F, VOC Content 0, Specific Gravity 1.06, Film Type Non-Curring, Dielectric Strength 500 Volts/Mil, Nitrogen Propellant, Contains Silicone, Non-flammable, Used for Gaskets, Transfer Belts, Conveyor Belts, Motors, Plant Machinery And Handling Equipment, Rubber Moldings, High Temperature, Low Load, Or High RPM Slides, Rollers, Wheels, Gears, Chains and Hoists
General Purpose Anti-Seize, 8 oz, Brush-Top Can, Copper, Paste, -95 Degrees F, 2,000 Degrees F, CRC, Copper, Non-Flammable
Hydraulic Oil, ISO Viscosity Grade 32, SAE Grade 10W, Base Oil Synthetic, Container Size 33 lb., Lubricant NSF Rating H1 Food Grade, Lubricant Additives No Additives, Min. Operating Temp. 0 Degrees F, Max. Operating Temp. 180 Degrees F, Flash Point 420 Degrees F, Pour Point -44 Degrees F, Container Type Bottle, Color Clear, Standards NSF 152883, H-1, Application Hydraulic Systems and Food Grade Products
Hydraulic Oil, ISO Viscosity Grade 46, SAE Grade 20W, Base Oil Synthetic, Container Size 33 lb., Lubricant NSF Rating H1 Food Grade, Lubricant Additives No Additives, Min. Operating Temp. 0 Degrees F, Max. Operating Temp. 180 Degrees F, Flash Point 451 Degrees F, Pour Point -40 Degrees F, Container Type Bottle, Color Clear, Standards NSF 152884, H-1, Application Hydraulic Systems and Food Grade Products
Hydraulic Oil,Size 5 gal.,Container Type Pail,SAE Grade Not Specified,ISO Viscosity Grade 46,Viscosity Index 141,Temp. Range -,Pour Point -42 Degrees C,Flash Point 216 Degrees C,Dropping Point Not Speficied,Four-Ball Wear Not Specified,Timken OK Load Not Specified,Viscosity @ 40C 46 cSt ,Viscosity @ 100C 7.86 cSt,Application For Systems Containing Gears and Bearings Where Cold Start Up and High Operating Temps Are Typical, High Pressure Vane, Piston and Gear Pumps
Transmission Fluid, Transmission Fluid Type ATF, Container Type Bottle, Container Size 1 qt, Series Dexron-VI, Transmission Type Automatic Transmissions, Viscosity Index 145, Standards ASTM D-2983, ASTM D-445, ASTM D-92, Base Formulation Synthetic, SAE Viscosity Grade Not Applicable, Color Red, Manufacturer Specifications GM DEXRON, Boiling Point 600 Degrees F