30 Degree Elbow, For Nominal Duct Diameter 16 in, Material Stainless Steel, Overall Length 20 1/4 in, Product Type Elbow, Material Thickness 20 ga, Weight 24 lb, Maximum Pressure Rating 42 in wc, For Duct Height 16 in, Shape Elbow, End Type Rolled Edge, For Duct Width 16 in, Maximum Airflow Not Applicable, Inside Diameter 16 in, Minimum Pressure Rating 2 in wc, Color Silver, Outlet Diameter 16 in, Overall Height 16 in, Centerline Radius 1 1/2 in, Angle 30 Degrees , Connection Type Clamp Together
30 Degree Elbow, For Nominal Duct Diameter 8 in, Material Stainless Steel, Overall Length 12 1/4 in, Product Type Elbow, Material Thickness 22 ga, Weight 6.1 lb, Maximum Pressure Rating 42 in wc, For Duct Height 8 in, Shape Elbow, End Type Rolled Edge, For Duct Width 8 in, Maximum Airflow Not Applicable, Inside Diameter 8 in, Minimum Pressure Rating 2 in wc, Color Silver, Outlet Diameter 8 in, Overall Height 8 in, Centerline Radius 1 1/2 in, Angle 30 Degrees , Connection Type Clamp Together
45 Degree Elbow, For Nominal Duct Diameter 10 in, Material Stainless Steel, Overall Length 18 in, Product Type Elbow, Material Thickness 22 ga, Weight 9 lb, Maximum Pressure Rating 42 in wc, For Duct Height 10 in, Shape Elbow, End Type Rolled Edge, For Duct Width 10 in, Maximum Airflow Not Applicable, Inside Diameter 10 in, Minimum Pressure Rating 2 in wc, Color Silver, Outlet Diameter 10 in, Overall Height 10 in, Centerline Radius 1 1/2 in, Angle 45 Degrees , Connection Type Clamp Together
90 Degree Elbow, For Nominal Duct Diameter 16 in, Inlet Diameter 15-63/64 In., Material Steel, Overall Length 34 1/4 in, Product Type Elbow, Material Thickness 20 ga, Weight 24 lb, Maximum Pressure Rating 42 in wc, For Duct Height 16 in, Shape Elbow, End Type Rolled Edge, For Duct Width 16 in, Maximum Airflow Not Applicable, Inside Diameter 16 in, Minimum Pressure Rating 2 in wc, Color Silver, Outlet Diameter 16 in, Overall Height 16 in, Centerline Radius 1 1/2 in, Angle 90 Degrees
Antifatigue Mat, Anti-Slip Backing Yes, Anti-Slip Surface Yes, Length 8 ft, Washdown Safe Yes, X-Ray Detectable No, Width 4 ft, Welding Safe No, USDA Certified No, Thickness 3/8 in, Series 755 Niru(R) Versa Runner(TM), Thermally Insulating No, Surface Texture Raised Pattern, Surface Material Nitrile Rubber, Surface Design Raised Nubs, Reversible No, Number of Border Stripes 0, Number of Beveled Edges 0
Ball Valve, Body Material Bronze, Body Style Inline, 2-Piece, Pipe Size 1/2 in, Connection Type FNPT x FNPT, Full Port, Max. Pressure 600 psi CWP, Max. Steam Pressure 150 psi WSP, Temp. Range -20 Degrees to 400 Degrees F, Ball Material 316 Stainless Steel, Seat Material RPTFE, Stem Type Blowout Proof, Handle Type Lever, Handle Material Zinc Plated Steel Clear Chromate Plastisol Coated, Stem Material 316 Stainless Steel, Body Seal Material PTFE
Batwing Smoke Seal, Overall Length 3 ft, Overall Width 1/2 in, Overall Height 7 ft, Color Brown, Flange Material Aluminum, Flange Width 1/2 in, For Use With Doors, Includes (1) 36 in Strip, (2) 84 in Strips, Insert Color Brown, Insert Material TPE, Insert Size 1/2 in, Material TPE Rubber, Projection 1/2 in, Sold As Set, Standards ANSI/BHMA A156.22, ANSI/UL10B, ANSI/UL10C (Category H), ANSI/UL1784, CAN/ULC-S104, ISO 22196, Product Type Batwing Smoke Seal
Combination Strainer/Ball Valve, Connection Type Sweat x Sweat, Pipe Size 1 in, Body Material Forged Brass, Max. Pressure 600 psi WOG, Temp. Range Up to 250 Degrees F, Screen Material Stainless Steel, Handle Material Zinc Plated with Vinyl Grip, Handle Type Lever, Bypass Port Size 1/2 in, Ball Material Chrome Plated Brass, Seal Material EPDM, Seat Material PTFE, Overall Length 6.03 in, Stem Type Blowout Proof, Stem Material Brass, Includes Pressure Temperature Port, Removable Wye Strainer
Concealed Fastener Seal, Overall Length 3 ft, Overall Width 1 3/16 in, Overall Height 7/16 in, Color Gray, Flange Material Aluminum, Flange Thickness 7/16 in, For Use With Doors, Insert Color Black, Insert Material Neoprene, Insert Size 3/16 in, Material Aluminum, Projection 7/16 in, Sold As Roll, Standards ANSI/BHMA A156.22, ANSI/UL10B, ANSI/UL10C (Category H), ANSI/UL1784, CAN/ULC-S104, Stays Flexible to 20 Degrees F, Product Type Concealed Fastener Seal
Concealed Fastener Seal, Overall Length 7 ft, Overall Width 1 3/16 in, Overall Height 7/16 in, Color Gray, Flange Material Aluminum, Flange Thickness 7/16 in, For Use With Doors, Insert Color Black, Insert Material Neoprene, Insert Size 3/16 in, Material Aluminum, Projection 7/16 in, Sold As Roll, Standards ANSI/BHMA A156.22, ANSI/UL10B, ANSI/UL10C (Category H), ANSI/UL1784, CAN/ULC-S104, Stays Flexible to 20 Degrees F, Product Type Concealed Fastener Seal
Condenser Fan Motor, Single Phase, Motor Design Permanent Split Capacitor, 1/2 to 1/5 HP, Nameplate RPM 1,075, No. of Speeds 1, Voltage 460V AC, Full Load Amps 1.05, 48Y Frame, Usable @ 208V No, Usable @ 200V No, Motor Thermal Protection Auto, 60 Hz Hz, Motor Service Factor 1, Ins. Class F, Motor Shaft Rotation CW/CCW, Max. Ambient Temp. 70 Degrees C, Duty Cycle Continuous, Lead Length 48 in, Motor Enclosure Design Totally Enclosed, Motor Mounting Type Stud, Motor Mounting Position All Angle
Condenser Fan Motor, Single Phase, Motor Design Permanent Split Capacitor, 3/4 HP, Nameplate RPM 1,075, No. of Speeds 1, Voltage 460V AC, 2.2 Full Load Amps, 48 Frame, Output Watts 560 W, 60 Hz, Usable @ 208V No, Usable @ 200V No, Motor Service Factor 1, Motor Thermal Protection Auto, Ins. Class F, Max. Ambient Temp. 80 Degrees C, Motor Shaft Rotation CW/CCW, Motor Enclosure Design Totally Enclosed Air-Over, Motor Mounting Type Stud, Motor Frame Material Steel, Motor Mounting Position All Angle
Contact Cleaner and Protectant, Plastic Safe Yes, Plastic Compatibility Safe on Most Plastics, Container Type Aerosol Spray Can, Container Size 10 oz, Cleaner Form Liquid, Dielectric Strength 350V, VOC Content 71.85 Percent, NSF Rating K2, Product Series No Series, Nonflammable No, Product Label Contact Cleaner and Protectant, Chlorinated No, Standards NSF Rated, RoHS Compliant, Base Formula Chemical Based Solvent, Biodegradable No, Butyl Free No, Flash Point Less Than 0 Degrees F
Dial Indicator - Lug Back, Range 0 to 10 mm, Graduations 0.01 mm, Accuracy +/- 0.013 mm (Overall), +/-0.01 mm, Long Form Calibration Certificate No, AGD Number AGD 2, Back Type Lug, Dial Color Yellow, Dial Reading 0-100, Dial Size 57 mm, Dimension Type Metric, Included Certification Certificate of Inspection, Maximum Measurement - mm 10 mm, Minimum Measurement - mm 0 mm, Number of Indicators 1, Operation Type Plunger, Range per Revolution 1 mm, Reading Continuous, Bearing Type Jeweled
Door Weather Strip, Overall Length 7 ft, Overall Width 1 3/16 in, Overall Height 5/16 in, Color Silver, Flange Material Aluminum, Flange Thickness 1/16 in, Flange Width 7/8 in, For Use With Doors, Includes (1) 4 ft Strip, (2) 7 ft Strips, #6 x 3/4 in Stainless Steel Sheet Metal Screws, Insert Color Gray, Insert Material Vinyl, Insert Size 5/16 in, Material Aluminum, Projection 5/16 in, Sold As Set, Standards ANSI/UL10C Category J, ANSI/UL1784, Stays Flexible to 0 Degrees to 140 Degrees F
Electrical Lubricant, Wet, CRC, 3-36, Net Fill 11 oz, Container Size 16 oz, Lubricant Container Aerosol Can, Petroleum Distillates, No Additives Primary Additive, Min. Operating Temp. 32 Degrees F, Max. Operating Temp. 250 Degrees F, NSF Rating H2 No Food Contact, 50 State VOC Compliant Yes, VOC Content 0 Percent, Lubricant Color Amber, Odorless No, Flammable Flammability, Extremely Flammable Aerosol (Category 1), Flash Point 200 Degrees F, Standards NSF Registered 017424, Category Code H2
Fiber Optic Cable, Mode Single Mode, Fiber Count 12, Fiber Material Aramid Yarn, Fire Rating Plenum, Jacket Color Black, Jacket Material Flame Retardant Compound, Number of Fibers Multifiber, Cable Length 1,000 ft, Clad Dimension 900 Micrometers, Core Diameter 50.0 Micrometer, Maximum Distance 10,000m @ 1310nm, Attenuation 1.0 dB/km @ 1310 and 1560 Nanometers, NEC Article and Type OFNP, Standards CSA FT6, ETL Listed, GR-409, ICEA S-104-696, RoHS Compliant Directive 2002/95/EC, TIA 568 C.3
General Purpose Anti-Seize, 8 oz, Brush-Top Can, Copper, Paste, -95 Degrees F, 2,000 Degrees F, CRC, Copper, Non-Flammable
General Purpose Lubricant, Dry, CRC, Net Fill 11 oz, Container Size 16 oz, Lubricant Container Aerosol Can, Molybdenum, No Additives Primary Additive, Min. Operating Temp. 20 Degrees F, Max. Operating Temp. 650 Degrees F, NSF Rating Not Rated, 50 State VOC Compliant Yes, VOC Content 66.3 Percent, Lubricant Color Gray, Odorless No, Flammable Flammability, Extremely Flammable Aerosol (Category 1), Flash Point Less Than 0 Degrees F, Standards RoHS Compliant, No USDA Certified Biobased Product
HDMI Cable, Cable Color Black, Overall Length 5 ft, Coaxial Cable Type Not Applicable, Conductor Gauge 28 AWG, For Use With Dolby TrueHD, DTS-HD Master Audio, DVD-Audio, SA-CD, Jacket Material PVC, End 2 Number of Connections 1, End 1 Number of Connections 1, Shielded Shielded, Total Number of Cables 1, End 1 Connection Type HDMI Male, End 2 Connection Type HDMI Male, Standards CSA, RoHS Compliant, UL Listed, Conductor Material Copper, End 1 Connection Finish Gold-Plated
HDMI Cable, Cable Color Red, Overall Length 6 ft, Coaxial Cable Type Not Applicable, Conductor Gauge 28 AWG, For Use With Dolby TrueHD, DTS-HD Master Audio, DVD-Audio, SA-CD, Jacket Material PVC, End 2 Number of Connections 1, End 1 Number of Connections 1, Shielded Shielded, Total Number of Cables 1, End 1 Connection Type HDMI Male, End 2 Connection Type HDMI Male, Standards CSA, RoHS Compliant, UL Listed, Conductor Material Copper, End 1 Connection Finish Gold-Plated
HDMI Cable, Cable Color White, Overall Length 10 ft, Coaxial Cable Type Not Applicable, Conductor Gauge 28 AWG, For Use With Dolby TrueHD, DTS-HD Master Audio, DVD-Audio, SA-CD, Jacket Material PVC, End 2 Number of Connections 1, End 1 Number of Connections 1, Shielded Shielded, Total Number of Cables 1, End 1 Connection Type HDMI Male, End 2 Connection Type HDMI Male, Standards CSA, RoHS Compliant, UL Listed, Conductor Material Copper, End 1 Connection Finish Gold-Plated
Hole Cutter Kit, Primary Material Application Metal, Materials Cut Electrical Works, Metalworking, Plumbing, Arbor Design Built-In, Tooth Material Carbide Tipped, Max. Cutting Depth 1/8 in, Impact Rated No, Hole Cutter Sizes (Hole Cutters) 7/8 in, 1 1/8 in, 1 3/8 in, Saw Size Range 7/8 in to 1 3/8 in, Number of Hole Cutters 3, Thread Size 5/8 In.-18, Shank Size 3/8 in, Pilot Drill Size 1/4 in dia x 2 3/4 in L, Number of Pieces 6