The MIPRO <b>ACT-828 Dante</b> dual channel wideband digital wireless receiver is an EIA standard 1U dual channel receiver with headphone connector added for monitoring. ACT-818 is a 1/2U single channel rack-mountable receiver with metal chassis. An improved full-color VFD (vacuum fluorescent display) provides clear viewing of all parameters. An expanded 64 MHz bandwidth ensures optimal flexibility, allowing more interference-free, compatible channels to select from. MIPRO's ACT systems are built to handle tough conditions, delivering superb RF reliability and transparent audio performance in a wide variety of professional venues and applications. This unit comes with a MiPro MP-80 3-in-1 dual slot Transmitter Charging Station</p><p>MIPRO's digital ACT-8 Series is now available with Dante interface. Dante is the most popular Ethernet-based digital audio transmission interface in the audio industry. Digital transmission ensures less environmental interference and less signal attenuation due to distance where maximum transmitting distance of 100 meters under normal speed of 100 Mb/s. Through packet and TDM technology, a Dante signal network cable can now transmit multiple channels of audio signal. In addition, with a Dante Controller, audio stream routing and monitoring is now an easy task.</p><p>Each receiver has the same size of EIA standard 1U metal case as other series for excellent heat dissipation and RF shielding, and a newly designed VFD screen, headphone monitor jack, buttons and a rotary control knob on the front panel, and AES/EBU digital output and Dante interface on the rear panel. Both receivers also have the same operating method and display mode as all other series models.<br />The RF receiving circuit is upgraded to 72 MHz wideband design, which is the same as that of the ACT-7 Series, and greatly increased stable receiving range of signal dropout-free and interference-free compatible channels.</p><p><b>Please note:</b> This product contains Lithium Ion Batteries. Due to FAA regulation this item is restricted to ground transportation in the lower 48 contiguous states and cannot ship to Alaska, Hawaii or Puerto Rico.</p>
The MIPRO <b>ACT-828 Dante</b> dual channel wideband digital wireless receiver is an EIA standard 1U dual channel receiver with headphone connector added for monitoring. ACT-818 is a 1/2U single channel rack-mountable receiver with metal chassis. An improved full-color VFD (vacuum fluorescent display) provides clear viewing of all parameters. An expanded 64 MHz bandwidth ensures optimal flexibility, allowing more interference-free, compatible channels to select from. MIPRO's ACT systems are built to handle tough conditions, delivering superb RF reliability and transparent audio performance in a wide variety of professional venues and applications. This unit comes with a MiPro MP-80 3-in-1 dual slot Transmitter Charging Station</p><p>MIPRO's digital ACT-8 Series is now available with Dante interface. Dante is the most popular Ethernet-based digital audio transmission interface in the audio industry. Digital transmission ensures less environmental interference and less signal attenuation due to distance where maximum transmitting distance of 100 meters under normal speed of 100 Mb/s. Through packet and TDM technology, a Dante signal network cable can now transmit multiple channels of audio signal. In addition, with a Dante Controller, audio stream routing and monitoring is now an easy task.</p><p>Each receiver has the same size of EIA standard 1U metal case as other series for excellent heat dissipation and RF shielding, and a newly designed VFD screen, headphone monitor jack, buttons and a rotary control knob on the front panel, and AES/EBU digital output and Dante interface on the rear panel. Both receivers also have the same operating method and display mode as all other series models.<br />The RF receiving circuit is upgraded to 72 MHz wideband design, which is the same as that of the ACT-7 Series, and greatly increased stable receiving range of signal dropout-free and interference-free compatible channels.</p><p><b>Please note:</b> This product contains Lithium Ion Batteries. Due to FAA regulation this item is restricted to ground transportation in the lower 48 contiguous states and cannot ship to Alaska, Hawaii or Puerto Rico.</p>
The MIPRO <b>ACT-848 Dante</b> is a four channel wideband digital wireless receiver. An expanded 64MHz bandwidth ensures optimal flexibility, allowing more interference-free compatible channels to select from. The ACT-848 Dante features full-color Vacuum Florescent Display for clear viewing and one touch ACTT setup. A single rotary control easily controls all system functions. MIPRO's ACT systems are built to handle tough conditions, delivering superb RF reliability and transparent audio performance in a wide variety of professional venues and applications. This unit comes with 4 MiPro MP-80 3-in-1 dual slot Transmitter Charging Stations.</p><p>Each receiver has the same size of EIA standard 1U metal case as other series for excellent heat dissipation and RF shielding, and a newly designed VFD screen, headphone monitor jack, buttons and a rotary control knob on the front panel, and AES/EBU digital output and Dante interface on the rear panel. Both receivers also have the same operating method and display mode as all other series models.<br />The RF receiving circuit is upgraded to 72 MHz wideband design, which is the same as that of the ACT-7 Series, and greatly increased stable receiving range of signal dropout-free and interference-free compatible channels.</p><p>MIPRO's digital ACT-8 Series is now available with Dante interface. Dante is the most popular Ethernet-based digital audio transmission interface in the audio industry. Digital transmission ensures less environmental interference and less signal attenuation due to distance where maximum transmitting distance of 100 meters under normal speed of 100 Mb/s. Through packet and TDM technology, a Dante signal network cable can now transmit multiple channels of audio signal. In addition, with a Dante Controller, audio stream routing and monitoring is now an easy task.</p><p><b>Please note:</b> This product contains Lithium Ion Batteries. Due to FAA regulation this item is restricted to ground transportation in the lower 48 contiguous states and cannot ship to Alaska, Hawaii or Puerto Rico.</p>
The MIPRO <b>ACT-848 Dante</b> is a four channel wideband digital wireless receiver. An expanded 64MHz bandwidth ensures optimal flexibility, allowing more interference-free compatible channels to select from. The ACT-848 Dante features full-color Vacuum Florescent Display for clear viewing and one touch ACTT setup. A single rotary control easily controls all system functions. MIPRO's ACT systems are built to handle tough conditions, delivering superb RF reliability and transparent audio performance in a wide variety of professional venues and applications. This unit comes with 4 MiPro MP-80 3-in-1 dual slot Transmitter Charging Stations.</p><p>Each receiver has the same size of EIA standard 1U metal case as other series for excellent heat dissipation and RF shielding, and a newly designed VFD screen, headphone monitor jack, buttons and a rotary control knob on the front panel, and AES/EBU digital output and Dante interface on the rear panel. Both receivers also have the same operating method and display mode as all other series models.<br />The RF receiving circuit is upgraded to 72 MHz wideband design, which is the same as that of the ACT-7 Series, and greatly increased stable receiving range of signal dropout-free and interference-free compatible channels.</p><p>MIPRO's digital ACT-8 Series is now available with Dante interface. Dante is the most popular Ethernet-based digital audio transmission interface in the audio industry. Digital transmission ensures less environmental interference and less signal attenuation due to distance where maximum transmitting distance of 100 meters under normal speed of 100 Mb/s. Through packet and TDM technology, a Dante signal network cable can now transmit multiple channels of audio signal. In addition, with a Dante Controller, audio stream routing and monitoring is now an easy task.</p><p><b>Please note:</b> This product contains Lithium Ion Batteries. Due to FAA regulation this item is restricted to ground transportation in the lower 48 contiguous states and cannot ship to Alaska, Hawaii or Puerto Rico.</p>
The MIPRO <b>TA-80</b> is a digital miniature wireless plug-on transmitter with balanced XLR mic input jack, designed for the measurement microphones, condenser / dynamic wired microphones, recording microphones and musical instrument microphones to become wireless and is compatible with ACT-8 Series receivers for premium sound quality. The TA-80 has a flat and wide frequency response, ultra-low T.H.D. and noise floor, fast transient response, strong anti-interference and high S/N ratio characteristics. These superior characteristics resolve the problems of tangling microphone cables and the deterioration of analog transmission characteristics, making the TA-80 the best system to reproduce the natural sound of any premium wired microphone.</p><p>With the balanced XLR mic input jack for installing on any condenser microphone, the TA-80 also provides 8 gain levels and a built-in switchable 12 / 48V, up to 10 mA current load phantom power for condenser microphones. The phantom power can be switched off for use with dynamic microphones. A built-in high-capacity lithium battery enables a continuous 5 to 8 hours of use per charge. The TA-80 can be recharged by dropping it into an intelligent MP-80 charger or by removing the single battery cell from the TA-80 and placing it into the charger. The TA-80 has reverse polarity protection and battery replacement is fast and easy. The TA-80 is compact, lightweight and ruggedly built. The streamlined aluminum housing is splash-proof with strict isolation of spurious and external noise interference. It has a built-in high efficiency transmitting antenna and a green backlit LCD clearly displays operation parameters. The TA-80 is compatible with MIPRO's ACT-80/80R miniature digital receivers for a variety of professional audio applications.</p><p><b>Please note:</b> This product contains Lithium Ion Batteries. Due to FAA regulation this item is restricted to ground transportation in the lower 48 contiguous states and cannot ship to Alaska, Hawaii or Puerto Rico.</p>
The MIPRO <b>TA-80</b> is a digital miniature wireless plug-on transmitter with balanced XLR mic input jack, designed for the measurement microphones, condenser / dynamic wired microphones, recording microphones and musical instrument microphones to become wireless and is compatible with ACT-8 Series receivers for premium sound quality. The TA-80 has a flat and wide frequency response, ultra-low T.H.D. and noise floor, fast transient response, strong anti-interference and high S/N ratio characteristics. These superior characteristics resolve the problems of tangling microphone cables and the deterioration of analog transmission characteristics, making the TA-80 the best system to reproduce the natural sound of any premium wired microphone.</p><p>With the balanced XLR mic input jack for installing on any condenser microphone, the TA-80 also provides 8 gain levels and a built-in switchable 12 / 48V, up to 10 mA current load phantom power for condenser microphones. The phantom power can be switched off for use with dynamic microphones. A built-in high-capacity lithium battery enables a continuous 5 to 8 hours of use per charge. The TA-80 can be recharged by dropping it into an intelligent MP-80 charger or by removing the single battery cell from the TA-80 and placing it into the charger. The TA-80 has reverse polarity protection and battery replacement is fast and easy. The TA-80 is compact, lightweight and ruggedly built. The streamlined aluminum housing is splash-proof with strict isolation of spurious and external noise interference. It has a built-in high efficiency transmitting antenna and a green backlit LCD clearly displays operation parameters. The TA-80 is compatible with MIPRO's ACT-80/80R miniature digital receivers for a variety of professional audio applications.</p><p><b>Please note:</b> This product contains Lithium Ion Batteries. Due to FAA regulation this item is restricted to ground transportation in the lower 48 contiguous states and cannot ship to Alaska, Hawaii or Puerto Rico.</p>
The MiPro <b>TA-80</b> is a true digital miniature wideband wireless plug-on transmitter with balanced XLR mic input jack, designed for measurement microphones, condenser / dynamic wired microphones, recording microphones and musical instrument microphones. It is compatible with all ACT-8 Series receivers. </p><p>The TA-80 has a flat and wide frequency response, ultra-low THD and noise floor, fast transient response, strong anti-interference, and high S/N ratio. The TA-80 has 8 gain levels and is switchable between 12 and 48 V, up to 10 mA current load, to provide phantom power for condenser microphones. The phantom power can be switched off for dynamic microphones. </p><p>A built-in high-capacity lithium battery enables continuous 5 to 8 hours of use per charge. TA-80 can be recharged by dropping it into an intelligent MP-80 charger with the MPA-80 charging adapter, not included, or by removing the single battery cell from the TA-80 and placing it into the charger. MIPRO's TA-80 has reverse polarity protection and battery replacement is fast and easy. </p><p>The TA-80 is compact, lightweight and ruggedly built. The aluminum housing is splash-proof and encloses a high efficiency transmitting antenna. The TA-80 has excellent isolation of spurious and external noise interference. The green backlit LCD clearly displays all operation parameters. </p><p>The TA-80 turns any microphone into a true digital wireless system producing the full frequency response and natural sound of any premium wired microphone surpassing the traditional characteristics of analogue systems.<br /><b><em>PLEASE NOTE:</b> This product contains Lithium-Ion Batteries. Due to FAA regulation this item is restricted to ground transportation in the lower 48 contiguous states and cannot ship to Alaska, Hawaii or Puerto Rico.</em></p>