Brand: ['MKT']

Products with this attribute (104 total)

Concrete Screw, 1/4" Dia., Flat, 1-3/4" L, Steel 100 PK

Concrete Screw, 1/4" Dia., Flat, 2-3/4" L, Steel 100 PK

Concrete Screw, 1/4" Dia., Flat, 3-3/4" L, Steel 100 PK

Concrete Screw, 1/4" Dia., Hex, 3-3/4" L, Steel 100 PK

Concrete Screw, 3/16" Dia., Flat, 3-3/4" L, Steel 100 PK

Flat Head Conc Screw,1/4"x1-1/4",PK100

Flat Head Conc Screw,1/4"x2-1/4",PK100

Flat Head Conc Screw,1/4"x3-1/4",PK100

Flat Head Conc Screw,3/16"x1-3/4",PK100

Flat Head Conc Screw,3/16"x2-1/4",PK100

Flat Head Conc Screw,3/16"x2-3/4",PK100

Flat Head Conc Screw,3/16"x3-1/4",PK100

Flat Head Conc Screw,3/16x1-1/4 In.,PK100, Package Quantity 100

Flat Head Concrete Screws,3/16"x4",PK100

Flat Head Tap-It,1/4" x 2",PK100

GlobalIndustrial.com - Material Handling Equipment|Workbenches|Furniture|Tools|Motors|HVAC

Hex Head Concrete Screws,3/16"x 4",PK100

HexHead Concrete Screw,1/4"x1-1/4",PK100

HexHead Concrete Screw,1/4"x1-3/4",PK100

HexHead Concrete Screw,1/4"x2-1/4",PK100

HexHead Concrete Screw,1/4"x2-3/4",PK100

HexHead Concrete Screw,1/4"x3-1/4",PK100

HexHead Concrete Screw,3/16x2-1/4",PK100

HexHead Concrete Screw,3/16x2-3/4",PK100

HexHead Concrete Screw,3/16x3-3/4",PK100

MKT Fastening nylon Tap-It anchor. Made of nylon body/carbon steel zinc plated nail. Light to medium loads under dead, variable, or vibratory conditions in solid or hollow base materials. specially tempered high strength nylon. Functions in an effective temperature range from -40 to +170 degrees F. quick and easy to install. Exceptionally resistant to vibration. G.S.A. Spec FF-S-325C, Group V, Type 2 Class 4. Made in US.

MKT Fastening nylon Tap-It anchor. Made of nylon body/carbon steel zinc plated nail. Light to medium loads under dead, variable, or vibratory conditions in solid or hollow base materials. specially tempered high strength nylon. Functions in an effective temperature range from -40 to +170 degrees F. quick and easy to install. Exceptionally resistant to vibration. G.S.A. Spec FF-S-325C, Group V, Type 2 Class 4. Made in US.

MKT Fastening nylon Tap-It anchor. Made of nylon body/carbon steel zinc plated nail. Light to medium loads under dead, variable, or vibratory conditions in solid or hollow base materials. specially tempered high strength nylon. Functions in an effective temperature range from -40 to +170 degrees F. quick and easy to install. Exceptionally resistant to vibration. G.S.A. Spec FF-S-325C, Group V, Type 2 Class 4. Made in US.

MKT Fastening steel conset masonry screw anchor. Commonly known as "Tapcon". Made of high strength steel for use in all types of solid and hollow masonry, wood and stone. Fluorocarbon coating offers high resistance to corrosion; costing withstands 1000 hour salt spray test. Cuts its own threads. Fast, easy installation; drill bit included in each box. Softer base materials require undersized bits for best results.

MKT Fastening steel conset masonry screw anchor. Commonly known as "Tapcon". Made of high strength steel for use in all types of solid and hollow masonry, wood and stone. Fluorocarbon coating offers high resistance to corrosion; costing withstands 1000 hour salt spray test. Cuts its own threads; hex head version offers 2 drive methods. Fast, easy installation; drill bit included in each box. Softer base materials require undersized bits for best results.

MKT Fastening Sup-R-Drop mechanical anchoring system is made of 304 stainless steel. Ideal for flush-mounting applications. Preassembled for ease of installation. Female threads accept standard UNC bolts or threaded rods. Slotted body is precision matched to a tapered internal plug for solid uniform expansion. Knurled body increases frictional forces between anchor and wall of hole. Concerns: dead load only, hole depth must be equal to anchor length and do not over torque. Approvals/listings: G.S.A. Spec FF-S-325C, Group VIII, Type 1, UL listed, FM approved. 3/8"-16 Thread size. 3/8-inches UNC bolt size. Measures 1/2-inches diameter by 1-9/16-inches length. 1-9/16-inches Minimum embedment. 10 foot pounds Maximum torque. 1/2-inches Hole diameter. Ultimate tension in 2000 PSI concrete: 3957 pounds and ultimate tension in 4000 PSI concrete: 4824 pounds. Ultimate shear: 3714 pounds.

MKT Fastening Sup-R-Stud mechanical wedge anchor is made of 303/304 stainless steel. Required hole diameter equals anchor diameter. Excellent for setting immediately. Can be loaded immediately. Can be set in a bottomless hole. Simple installation. Nut and washer supplied in package. ROHS compliant. Concerns: do not use in brick or block, not advised for use where vibratory loads are high, oversize holes are detrimental and will reduce load performance. Approvals/listings: G.S.A. Spec FF-S-325C, Group II, Type 4, Class 1, FM approved. 3-inches Thread length. 1/2-inches Hole diameter. 1-1/2-inches max thickness mat to be anchored. 25-50 foot pounds required torque to set. Measures 1/2-inches diameter by 4-1/4-inches length. 1/2" - 13 Thread size. 2-1/4-inches Minimum embedment and 4-1/2-inches embedment In concrete. Ultimate tension in 2000 PSI concrete: 4120 and 4608 pounds. Ultimate tension in 4000 PSI concrete: 5068 pounds and 5772 pounds. Ultimate shear: 6828 pounds.

MKT Fastening Sup-R-Stud mechanical wedge anchor is made of 303/304 stainless steel. Required hole diameter equals anchor diameter. Excellent for setting immediately. Can be loaded immediately. Can be set in a bottomless hole. Simple installation. Nut and washer supplied in package. ROHS compliant. Concerns: do not use in brick or block, not advised for use where vibratory loads are high, oversize holes are detrimental and will reduce load performance. Approvals/listings: G.S.A. Spec FF-S-325C, Group II, Type 4, Class 1. 3-1/2-inches Thread length. 1-inches Hole diameter. 1/2-inches max thickness mat to be anchored. 150-250 foot pounds required torque to set. Measures 1-inches diameter by 6-inches length. 1" - 8 Thread size. 4-1/2-inches Minimum embedment and 9-inches embedment In concrete. Ultimate tension in 2000 PSI concrete: 10226 and 15479 pounds. Ultimate tension in 4000 PSI concrete: 15829 pounds and 24375 pounds. Ultimate shear: 28023 pounds.

MKT Fastening Sup-R-Stud mechanical wedge anchor is made of 303/304 stainless steel. Required hole diameter equals anchor diameter. Excellent for setting immediately. Can be loaded immediately. Can be set in a bottomless hole. Simple installation. Nut and washer supplied in package. ROHS compliant. Concerns: do not use in brick or block, not advised for use where vibratory loads are high, oversize holes are detrimental and will reduce load performance. Approvals/listings: G.S.A. Spec FF-S-325C, Group II, Type 4, Class 1. 4-inches Thread length. 1-inches Hole diameter. 6-1/2-inches max thickness mat to be anchored. 150-250 foot pounds required torque to set. Measures 1-inches diameter by 12-inches length. 1" - 8 Thread size. 4-1/2-inches Minimum embedment and 9-inches embedment In concrete. Ultimate tension in 2000 PSI concrete: 10226 and 15479 pounds. Ultimate tension in 4000 PSI concrete: 15829 pounds and 24375 pounds. Ultimate shear: 28023 pounds.

MKT Fastening Zap-It anchor required hole diameter equals anchor diameter. Fast, easy installation. Zinc Plated Carbon Steel Nail and anchor body allow for fastening in outdoor applications. G.S.A. Spec FF-S-325C, Group V, Type 2 Class 3. Dead loads only; not recommended for eccentric loading.

MKT Fastening zinc plated taper bolt anchor with expansion nut. Required hole diameter equals anchor diameter. Variation in hole size can be accommodated by turning the expander nut. Equipment may be removed and replaced. The bolt is simply re-inserted and torqued to obtain original holding power (the nut stays in the hole). Bolt can be removed and re-used with a new nut after cleaning and lubricating the threads. Grade 5 zinc plated. Strength - the highest shear strength of any expansion anchor. Withstands vibratory loads. It works in a bottomless hole. Made in USA. Do not use in brick or block. Tested by Pittsburgh Testing Laboratory PG-2170.

MKT Fastening zinc plated taper bolt anchor with expansion nut. Required hole diameter equals anchor diameter. Variation in hole size can be accommodated by turning the expander nut. Equipment may be removed and replaced. The bolt is simply re-inserted and torqued to obtain original holding power (the nut stays in the hole). Bolt can be removed and re-used with a new nut after cleaning and lubricating the threads. Grade 5 zinc plated. Strength - the highest shear strength of any expansion anchor. Withstands vibratory loads. It works in a bottomless hole. Made in USA. Do not use in brick or block. Tested by Pittsburgh Testing Laboratory PG-2170.

MKT Fastening zinc plated taper bolt anchor with expansion nut. Required hole diameter equals anchor diameter. Variation in hole size can be accommodated by turning the expander nut. Equipment may be removed and replaced. The bolt is simply re-inserted and torqued to obtain original holding power (the nut stays in the hole). Bolt can be removed and re-used with a new nut after cleaning and lubricating the threads. Grade 5 zinc plated. Strength - the highest shear strength of any expansion anchor. Withstands vibratory loads. It works in a bottomless hole. Made in USA. Do not use in brick or block. Tested by Pittsburgh Testing Laboratory PG-2170.

Package Quantity 100

Package Quantity 100

Package Quantity 100

Package Quantity 100

Tap-It, Nail Drive, 1/4" Dia., 1" L, Nylon 100 PK

Tap-It, Nail Drive, 1/4" Dia., 2" L, 100 PK

Tap-It, Round Head, 3/16 x 1-1/2", PK100

Taper Bolt w/Nut,5/8x3 1/2 In,Pk20

Zap-It Mech Anchor,1/4" x 1",PK100

Zap-It Mech Anchor,1/4" x 1-1/4",PK100