CategoryIdL2: 9553

Products with this attribute (293 total)

Sonic Masonry Drill Bit,3/8x18x20in.
Sonic Masonry Drill Bit,5/16x10x12in.
Sonic SDS Max Drill Bit,9/16x15-1/2x21in
Sonic SDS Max Drill Bit,9/16x7-1/2x13 in
Sonic SDS Plus Drill Bit,1/2x22x24 in.
Sonic SDS Plus Drill Bit,1/2x8x10-1/2 in
Sonic SDS Plus Drill Bit,1/4x14x16 in.
Sonic SDS Plus Drill Bit,1x8x10 in.
Sonic SDS Plus Drill Bit,3/4x16x18 in.
Sonic SDS Plus Drill Bit,3/4x22x24 in.
Sonic SDS Plus Drill Bit,3/8x16x18 in.
Sonic SDS Plus Drill Bit,3/8x8x10-1/4 in
Sonic SDS Plus Drill Bit,5/8x16x18 SDSin
Sonic SDS Plus Drill Bit,5/8x22x24 in.
Sonic SDS Plus Drill Bit,5/8x6x8-1/4 in., SDS Plus, 5/8 in Drill Bit Size, 8 1/4 in Overall Length, Bright (Uncoated), Maximum Drilling Depth 6 in
Sonic SDS Plus Drill Bit,9/16x4x6-1/4 in
Sonic SDS Plus DrillBit,9/16x10x12-1/4in
Sonic Spline Drill Bit,1-3/8x17x22 in.
Sonic Spline Drill Bit,1/2x11x16 in., Spline, 1/2 in Drill Bit Size, 16 in Overall Length, Bright (Uncoated), Maximum Drilling Depth 11 in
Sonic Spline Drill Bit,1/2x17x22 in.
Sonic Spline Drill Bit,1/2x31x36 in.
Sonic Spline Drill Bit,1/2x5x10 in.
Sonic Spline Drill Bit,3/4x11x16 in.
Sonic Spline Drill Bit,3/4x17x22 in.
Sonic Spline Drill Bit,3/4x24x29 in.
Sonic Spline Drill Bit,3/4x8x13 in.
Sonic Spline Drill Bit,3/8x5x10 in.
Sonic Spline Drill Bit,5/8x17x22 in.
Sonic Spline Drill Bit,5/8x31x36 in.
Sonic Spline Drill Bit,7/8x11x16 in.
Sonic Spline Drill Bit,7/8x17x22 in.
Sonic Spline Drill Bit,7/8x31x36 in.
Sonic Spline Drill Bit,9/16x17x23 in.
Speed Cut Auger Bits. Quad Flute Design For Fast Chip Ejection. Full Screw Tip Allows Bit To Self-Feed. Non-Stick Coating Resists Sap And Heat Build Up While Cutting. Power Drive Shank Fits All Electric Drills And Quick Change Adapters. 10X Fast Than Flat Wood Spade Bits.
Speed Cut Auger Bits. Quad Flute Design For Fast Chip Ejection. Full Screw Tip Allows Bit To Self-Feed. Non-Stick Coating Resists Sap And Heat Build Up While Cutting. Power Drive Shank Fits All Electric Drills And Quick Change Adapters. 10X Fast Than Flat Wood Spade Bits.
Spline Drill Bit,1-1/2x17x22in.,4-Cutter
Spline Drill Bit,1-1/4x31x36in.,4-Cutter
Spline Drill Bit,1-3/8x17x22in.,4-Cutter
Spline Drill Bit,2x18x22 in.,4-Cutter
Spline Drill Bit,3/4x11x16 in.,4-Cutter
Spline Drill Bit,3/4x17/22 in.,4-Cutter
Spline Drill Bit,3/4x24x29 in.,4-Cutter
Spline Drill Bit,5/8x24x29 in.,4-Cutter
Spline Drill Bit,5/8x5x10 in.,4-Cutter
Spline Hammer Core Bit,2-5/8x22 in.
Spline Hammer Core Bit,2x11-3/8 in.
Spline Hammer Core Bit,2x22 in.
Spline Hammer Core Bit,3-1/8x22 in.
Spline Hammer Core Bit,4x11-3/8 in.
Spline Hammer Core Bit,5x22 in.
Stubby Drill Bit 19/64 Overall Length 2-3/4 Cutting Length 1-9/16
Stubby Drill Bit 5/16 Overall Length 2-13/16 Cutting Length 1-5/8
Stubby Drills, Fractional Screw Machine Length Drill Bits. Stubby Drills Are Manufactured From Quality, Industrial High Speed Steel. Special Heat Treatment, Results In Cutting Edges That Remain Sharp Longer When Drilling Tough Materials. 135 Degree Split Point, Ground From Solid Black Finish High Speed Steel. Anis Specifications.
Stubby Drills, Fractional Screw Machine Length Drill Bits. Stubby Drills Are Manufactured From Quality, Industrial High Speed Steel. Special Heat Treatment, Results In Cutting Edges That Remain Sharp Longer When Drilling Tough Materials. 135 Degree Split Point, Ground From Solid Black Finish High Speed Steel. Anis Specifications.
Stubby Drills, Fractional Screw Machine Length Drill Bits. Stubby Drills Are Manufactured From Quality, Industrial High Speed Steel. Special Heat Treatment, Results In Cutting Edges That Remain Sharp Longer When Drilling Tough Materials. 135 Degree Split Point, Ground From Solid Black Finish High Speed Steel. Anis Specifications.
Stubby Drills, Fractional Screw Machine Length Drill Bits. Stubby Drills Are Manufactured From Quality, Industrial High Speed Steel. Special Heat Treatment, Results In Cutting Edges That Remain Sharp Longer When Drilling Tough Materials. 135 Degree Split Point, Ground From Solid Black Finish High Speed Steel. Anis Specifications.
Stubby Drills, Fractional Screw Machine Length Drill Bits. Stubby Drills Are Manufactured From Quality, Industrial High Speed Steel. Special Heat Treatment, Results In Cutting Edges That Remain Sharp Longer When Drilling Tough Materials. 135 Degree Split Point, Ground From Solid Black Finish High Speed Steel. Anis Specifications.
Stubby Drills, Fractional Screw Machine Length Drill Bits. Stubby Drills Are Manufactured From Quality, Industrial High Speed Steel. Special Heat Treatment, Results In Cutting Edges That Remain Sharp Longer When Drilling Tough Materials. 135 Degree Split Point, Ground From Solid Black Finish High Speed Steel. Anis Specifications.
Stubby Drills, Fractional Screw Machine Length Drill Bits. Stubby Drills Are Manufactured From Quality, Industrial High Speed Steel. Special Heat Treatment, Results In Cutting Edges That Remain Sharp Longer When Drilling Tough Materials. 135 Degree Split Point, Ground From Solid Black Finish High Speed Steel. Anis Specifications.
Stubby Drills, Fractional Screw Machine Length Drill Bits. Stubby Drills Are Manufactured From Quality, Industrial High Speed Steel. Special Heat Treatment, Results In Cutting Edges That Remain Sharp Longer When Drilling Tough Materials. 135 Degree Split Point, Ground From Solid Black Finish High Speed Steel. Anis Specifications.
Stubby Drills, Number Screw Machine Length Drill Bits. Stubby Drills Are Manufactured From Quality Industrial High Speed Steel. Special Heat Treatment, Results In Cutting Edges That Remain Sharp Longer When Drilling Tough Materials.
Stubby Drills, Number Screw Machine Length Drill Bits. Stubby Drills Are Manufactured From Quality Industrial High Speed Steel. Special Heat Treatment, Results In Cutting Edges That Remain Sharp Longer When Drilling Tough Materials.
Stubby Drills, Number Screw Machine Length Drill Bits. Stubby Drills Are Manufactured From Quality Industrial High Speed Steel. Special Heat Treatment, Results In Cutting Edges That Remain Sharp Longer When Drilling Tough Materials.
Titanium Drill Bit 3/16" Overall Length 3-1/2"
Titanium Drill Bit 7/32" Overall Length 3-3/4"
Titanium Drill Bit. Titanium Nitrate Coating Resists Heat And Adds Lubricity To Extend Drill Life. Designed For Precision Drilling In Metal, Wood And Plastic. No Center Punch Needed: Century Quick-Cut Points Are Self-Centering And Penetrate Faster With Less Pressure...Will Not "Walk" Or "Wander" At The Starting Surface.
Titanium Drill Bit. Titanium Nitrate Coating Resists Heat And Adds Lubricity To Extend Drill Life. Designed For Precision Drilling In Metal, Wood And Plastic. No Center Punch Needed: Century Quick-Cut Points Are Self-Centering And Penetrate Faster With Less Pressure...Will Not "Walk" Or "Wander" At The Starting Surface.
Titanium Drill Bit. Titanium Nitrate Coating Resists Heat And Adds Lubricity To Extend Drill Life. Designed For Precision Drilling In Metal, Wood And Plastic. No Center Punch Needed: Century Quick-Cut Points Are Self-Centering And Penetrate Faster With Less Pressure...Will Not "Walk" Or "Wander" At The Starting Surface.
Titanium Drill Bit. Titanium Nitrate Coating Resists Heat And Adds Lubricity To Extend Drill Life. Designed For Precision Drilling In Metal, Wood And Plastic. No Center Punch Needed: Century Quick-Cut Points Are Self-Centering And Penetrate Faster With Less Pressure...Will Not "Walk" Or "Wander" At The Starting Surface.
Titanium Drill Bit. Titanium Nitrate Coating Resists Heat And Adds Lubricity To Extend Drill Life. Designed For Precision Drilling In Metal, Wood And Plastic. No Center Punch Needed: Century Quick-Cut Points Are Self-Centering And Penetrate Faster With Less Pressure...Will Not "Walk" Or "Wander" At The Starting Surface.
Titanium Drill Bit. Titanium Nitrate Coating Resists Heat And Adds Lubricity To Extend Drill Life. Designed For Precision Drilling In Metal, Wood And Plastic. No Center Punch Needed: Century Quick-Cut Points Are Self-Centering And Penetrate Faster With Less Pressure...Will Not "Walk" Or "Wander" At The Starting Surface.
Titanium Drill Bit. Titanium Nitrate Coating Resists Heat And Adds Lubricity To Extend Drill Life. Designed For Precision Drilling In Metal, Wood And Plastic. No Center Punch Needed: Century Quick-Cut Points Are Self-Centering And Penetrate Faster With Less Pressure...Will Not "Walk" Or "Wander" At The Starting Surface.
Titanium Drill Bit. Titanium Nitrate Coating Resists Heat And Adds Lubricity To Extend Drill Life. Designed For Precision Drilling In Metal, Wood And Plastic. No Center Punch Needed: Century Quick-Cut Points Are Self-Centering And Penetrate Faster With Less Pressure...Will Not "Walk" Or "Wander" At The Starting Surface.
Titanium Drill Bit. Titanium Nitrate Coating Resists Heat And Adds Lubricity To Extend Drill Life. Designed For Precision Drilling In Metal, Wood And Plastic. No Center Punch Needed: Century Quick-Cut Points Are Self-Centering And Penetrate Faster With Less Pressure...Will Not "Walk" Or "Wander" At The Starting Surface.
Titanium Drill Bit. Titanium Nitrate Coating Resists Heat And Adds Lubricity To Extend Drill Life. Designed For Precision Drilling In Metal, Wood And Plastic. No Center Punch Needed: Century Quick-Cut Points Are Self-Centering And Penetrate Faster With Less Pressure...Will Not "Walk" Or "Wander" At The Starting Surface.
Titanium Drill Bit. Titanium Nitrate Coating Resists Heat And Adds Lubricity To Extend Drill Life. Designed For Precision Drilling In Metal, Wood And Plastic. No Center Punch Needed: Century Quick-Cut Points Are Self-Centering And Penetrate Faster With Less Pressure...Will Not "Walk" Or "Wander" At The Starting Surface.
Titanium Drill Bit. Titanium Nitrate Coating Resists Heat And Adds Lubricity To Extend Drill Life. Designed For Precision Drilling In Metal, Wood And Plastic. No Center Punch Needed: Century Quick-Cut Points Are Self-Centering And Penetrate Faster With Less Pressure...Will Not "Walk" Or "Wander" At The Starting Surface.
Titanium Drill Bit. Titanium Nitrate Coating Resists Heat And Adds Lubricity To Extend Drill Life. Designed For Precision Drilling In Metal, Wood And Plastic. No Center Punch Needed: Century Quick-Cut Points Are Self-Centering And Penetrate Faster With Less Pressure...Will Not "Walk" Or "Wander" At The Starting Surface.
Wire Gauge Brite Drill Bits. Made From Feature Premium Grade High Speed Steel. Precision Ground Points. Designed To Operate In Stationary Or Portable Tools. General Purpose Drilling In Wood, Metal And Plastic. Numbered Drill Bits.
Wire Gauge Brite Drill Bits. Made From Feature Premium Grade High Speed Steel. Precision Ground Points. Designed To Operate In Stationary Or Portable Tools. General Purpose Drilling In Wood, Metal And Plastic. Numbered Drill Bits.
Wire Gauge Brite Drill Bits. Made From Feature Premium Grade High Speed Steel. Precision Ground Points. Designed To Operate In Stationary Or Portable Tools. General Purpose Drilling In Wood, Metal And Plastic. Numbered Drill Bits.
X1 Spade Bits work fast and get clean holes. Extended spurs cut crisp, clean holes in thick stock effortlessly and each bit is forged and heat-treated to withstand rigorous use. The 1/4 in. quick-change shank works with drills or impact drivers. These spade bits are perfect for many remodeling projects around the home as well as woodworking applications.
X1 Spade Bits work fast and get clean holes. Extended spurs cut crisp, clean holes in thick stock effortlessly and each bit is forged and heat-treated to withstand rigorous use. The 1/4 in. quick-change shank works with drills or impact drivers. These spade bits are perfect for many remodeling projects around the home as well as woodworking applications.
X1 Spade Bits work fast and get clean holes. Extended spurs cut crisp, clean holes in thick stock effortlessly and each bit is forged and heat-treated to withstand rigorous use. The 1/4 in. quick-change shank works with drills or impact drivers. These spade bits are perfect for many remodeling projects around the home as well as woodworking applications.
X1 Spade Bits work fast and get clean holes. Extended spurs cut crisp, clean holes in thick stock effortlessly and each bit is forged and heat-treated to withstand rigorous use. The 1/4 in. quick-change shank works with drills or impact drivers. These spade bits are perfect for many remodeling projects around the home as well as woodworking applications.
X1 Spade Bits work fast and get clean holes. Extended spurs cut crisp, clean holes in thick stock effortlessly and each bit is forged and heat-treated to withstand rigorous use. The 1/4 in. quick-change shank works with drills or impact drivers. These spade bits are perfect for many remodeling projects around the home as well as woodworking applications.
X1 Spade Bits work fast and get clean holes. Extended spurs cut crisp, clean holes in thick stock effortlessly and each bit is forged and heat-treated to withstand rigorous use. The 1/4 in. quick-change shank works with drills or impact drivers. These spade bits are perfect for many remodeling projects around the home as well as woodworking applications.
X1 Spade Bits work fast and get clean holes. Extended spurs cut crisp, clean holes in thick stock effortlessly and each bit is forged and heat-treated to withstand rigorous use. The 1/4 in. quick-change shank works with drills or impact drivers. These spade bits are perfect for many remodeling projects around the home as well as woodworking applications.
X1 Spade Bits work fast and get clean holes. Extended spurs cut crisp, clean holes in thick stock effortlessly and each bit is forged and heat-treated to withstand rigorous use. The 1/4 in. quick-change shank works with drills or impact drivers. These spade bits are perfect for many remodeling projects around the home as well as woodworking applications.
X1 Spade Bits work fast and get clean holes. Extended spurs cut crisp, clean holes in thick stock effortlessly and each bit is forged and heat-treated to withstand rigorous use. The 1/4 in. quick-change shank works with drills or impact drivers. These spade bits are perfect for many remodeling projects around the home as well as woodworking applications.
X1 Spade Bits work fast and get clean holes. Extended spurs cut crisp, clean holes in thick stock effortlessly and each bit is forged and heat-treated to withstand rigorous use. The 1/4 in. quick-change shank works with drills or impact drivers. These spade bits are perfect for many remodeling projects around the home as well as woodworking applications.
X1 Spade Bits work fast and get clean holes. Extended spurs cut crisp, clean holes in thick stock effortlessly and each bit is forged and heat-treated to withstand rigorous use. The 1/4 in. quick-change shank works with drills or impact drivers. These spade bits are perfect for many remodeling projects around the home as well as woodworking applications.
X1 Spade Bits work fast and get clean holes. Extended spurs cut crisp, clean holes in thick stock effortlessly and each bit is forged and heat-treated to withstand rigorous use. The 1/4 in. quick-change shank works with drills or impact drivers. These spade bits are perfect for many remodeling projects around the home as well as woodworking applications.