CategoryL1: Tools & Machining

Products with this attribute (6549 total)

Stubby Drills, Fractional Screw Machine Length Drill Bits. Stubby Drills Are Manufactured From Quality, Industrial High Speed Steel. Special Heat Treatment, Results In Cutting Edges That Remain Sharp Longer When Drilling Tough Materials. 135 Degree Split Point, Ground From Solid Black Finish High Speed Steel. Anis Specifications.

Stubby Drills, Number Screw Machine Length Drill Bits. Stubby Drills Are Manufactured From Quality Industrial High Speed Steel. Special Heat Treatment, Results In Cutting Edges That Remain Sharp Longer When Drilling Tough Materials.

Super Volume Safety Blow Gun, Lever, Body Material Zinc Alloy, Air Inlet Size 1/4 in, Air Inlet Type NPT

Surface Roughness Tester Drive Unit, Profile Ra, Ry, Rz, Rt, Rp, Rq, Rv, Rsk, Rku, Rc, RSm, S, RPc, R3z, Analysis Graph Bearing Area Curve, Amplitude Distribution Curve, Dimensions (In.) 6.85 W x 2.59 D x 2 H, Power Supply Ni-MH Battery, AC Adapter, Paper Type Thermal, Paper Width (In.) 2.28 in, For Use With Mfr. No. 178-563-01A, 178-563-02A, 173-573-01A, 178-573-02A

Surface Roughness Tester,17.5mm Range

Swingarm Mechanical Sending Unit

T-10 Torque Driver Bit, 1" Long (1 Bit)

T-10 Torque Driver Bit, 1" Long (100 Bits), 100PK

T-10 Torque Driver Bit, 1" Long (12 Bits), 12PK

T-10 Torque Driver Bit, 1" Long (18 Bits), 18PK

T-10 Torque Driver Bit, 1" Long (24 Bits), 24PK

T-10 Torque Driver Bit, 1" Long (3 Bits), 3PK

T-10 Torque Driver Bit, 1" Long (6 Bits), 6PK

T-10 Torque Driver Bit, 1" Long (60 Bits), 60PK

T-15 Torque Driver Bit, 1" Long (100 Bits), 100PK

T-15 Torque Driver Bit, 1" Long (18 Bits), 18PK

T-15 Torque Driver Bit, 1" Long (24 Bits), 24PK

T-15 Torque Driver Bit, 1" Long (3 Bits), 3PK

T-15 Torque Driver Bit, 1" Long (48 Bits), 48PK

T-15 Torque Driver Bit, 1" Long (6 Bits), 6PK

T-15 Torque Driver Bit, 1" Long (60 Bits), 60PK

T-20 Torque Driver Bit, 1" Long (1 Bit)

T-20 Torque Driver Bit, 1" Long (100 Bits), 100PK

T-20 Torque Driver Bit, 1" Long (12 Bits), 12PK

T-20 Torque Driver Bit, 1" Long (18 Bits), 18PK

T-20 Torque Driver Bit, 1" Long (24 Bits), 24PK

T-20 Torque Driver Bit, 1" Long (3 Bits), 3PK

T-20 Torque Driver Bit, 1" Long (36 Bits), 36PK

T-20 Torque Driver Bit, 1" Long (6 Bits), 6PK

T-20 Torque Driver Bit, 1" Long (60 Bits), 60PK

T-25 Torque Driver Bit, 1" Long (1 Bit)

T-25 Torque Driver Bit, 1" Long (100 Bits), 100PK

T-25 Torque Driver Bit, 1" Long (12 Bits), 12PK

T-25 Torque Driver Bit, 1" Long (18 Bits), 18PK

T-25 Torque Driver Bit, 1" Long (24 Bits), 24PK

T-25 Torque Driver Bit, 1" Long (3 Bits), 3PK

T-25 Torque Driver Bit, 1" Long (36 Bits), 36PK

T-25 Torque Driver Bit, 1" Long (6 Bits), 6PK

T-25 Torque Driver Bit, 1" Long (60 Bits), 60PK

T-30 Torque Driver Bit, 1" Long (1 Bit)

T-30 Torque Driver Bit, 1" Long (100 Bits), 100PK

T-30 Torque Driver Bit, 1" Long (12 Bits), 12PK

T-30 Torque Driver Bit, 1" Long (18 Bits), 18PK

T-30 Torque Driver Bit, 1" Long (24 Bits), 24PK

T-30 Torque Driver Bit, 1" Long (36 Bits), 36PK

T-30 Torque Driver Bit, 1" Long (48 Bits), 48PK

T-30 Torque Driver Bit, 1" Long (6 Bits), 6PK

T-30 Torque Driver Bit, 1" Long (60 Bits), 60PK

T-40 Torque Driver Bit, 1" Long (1 Bit)

T-40 Torque Driver Bit, 1" Long (100 Bits), 100PK

T-40 Torque Driver Bit, 1" Long (12 Bits), 12PK

T-40 Torque Driver Bit, 1" Long (18 Bits), 18PK

T-40 Torque Driver Bit, 1" Long (24 Bits), 24PK

T-40 Torque Driver Bit, 1" Long (36 Bits), 36PK

T-40 Torque Driver Bit, 1" Long (48 Bits), 48PK

T-40 Torque Driver Bit, 1" Long (6 Bits), 6PK

TA9A224-0 File SF-12 5Pcs/Set,PK5, Package Quantity 5

TA9A225-0 File SF-13 5Pcs/Set,PK5

TA9A367-0,Pad Assembly

Tap & Drill Bit Gauge, Material Steel, Finish Satin Chrome, Dimension Type Fractional Inch, For Use With For Fractional Inch Drill Bits, Maximum Size - Inch 0.228 in, Maximum Size - Wire 3, Minimum Size - Inch 0.04 in, Minimum Size - Wire 2 AWG, Length 6 3/8 in, Range #2 to 1/4 in

Tap Set, Straight Flute, Series 2000N, Imperial, 3 Piece, 264 Size, UNF Thread Standard, 716 Th

Tap Set, Straight Flute, Series 2000N, Imperial, 3 Piece, 440 Size, UNC Thread Standard, 916 Th

Taper Pipe, 5 Flutes, NPT

Taper Pipe, 5 Flutes, NPTF

Taper, 7 Flutes, NPT

TB05891-0 BHR8-00050 Broach Holder

TB08874-0 10Pcs/Set,PK10

Telescope Gage 12.7-19Mm

Telescoping Gage

Telescoping Gauge Set, Range 1/2 in to 5 9/10 in, Gauge Plunger Style Double-Arm Plunger, Included Gauge Ranges 1 1/4 in to 2 1/8 in, 1/2 in to 3/4 in, 2 1/8 in to 3 1/2 in, 3 1/2 in to 6 in, 3/4 in to 1 1/4 in, Maximum Measurement - Inch 5 9/10 in, Minimum Measurement - Inch 1/2 in, Number of Pieces 5, Case Type Fitted Pouch, Includes Fitted Carrying Case, Includes Case Yes, Locking Style Knurled Clamp, Overall Length 4 21/64 in to 6 in

Tension Gage,Dial,0.3-3N

TG100 3/32-1" 30pc. Collet Sets

TG75 1/4-3/4" 33pc. Collet Sets

TG75 1/8-3/4" 11pc. Collet Sets

TG75 3/32-3/4" 22pc. Collet Sets

TG75 3/32-3/4" 43pc. Collet Sets

TG75 3/8-3/4" 25pc. Collet Sets

The HD handheld demagnetizer provides mobile demagnetization of large or complex components where you cannot use table or tunnel demagnetizers, such as moulds, bearings, and various machine and mechanical parts, etc. It is an efficient tool where quick and mobile demagnetization is needed.

The MILBAR 290R Retaining Ring Pliers are the ideal tool for securing retaining rings in place. They can also be used to adjust hose clamps, hose couplings and pipe fittings. The locking pliers have a thumb screw stop which allows you to apply pressure without having to worry about the plier slipping. The carbon steel plier is 6 1/4 in. long and has an external design with a cushion grip handle. It comes with an internal fixed tip that works well on shafts of 1/8 in to 1 in. diameter. Its tip angle is 90 degrees, making it easy to insert into small spaces while keeping your hands clear of obstructions like sheet metal or rivets. If you want locking pliers that can secure retaining rings in place, then this MILBAR 290R Retaining Ring Pliers will do the job nicely.

The Mitutoyo 050083-10 Depth Attachment for 4, 6, 8 In. Calipers will help you take your measurements to the next level. It is compatible with 12", 4", 6" and 8" calipers. The depth stop allows you to take precise measurements in a range of up to 25 mm in width. It comes with a secure locking clamp that locks into place for ease of use and security while taking measurements. This Mitutoyo 050083-10 Depth Attachment for 4, 6, 8 In. Calipers will make a big difference on the job site.

The Mitutoyo 141-208 Inside Micrometer Head is the high-quality micrometer you need to take your measurements with accuracy. With a range of 2 to 8", this inside micrometer head gives you precise readings for both small and large measurements. The hardened steel anvil ensures durability, while the plain thimble makes it easy to rotate. It has a 1/2" movement of screw, which makes it easy to set up on any surface. This micrometer comes in a plastic case that keeps the tool safe when not in use. The Mitutoyo 141-208 Inside Micrometer Head will give you accurate results every time.

The Mitutoyo 141-233 Inside Micrometer Head is a tool that allows you to take precise measurements in the smallest of spaces. With a range of 2 to 12", this inside micrometer head has an accuracy of +/-0.00048 in. The thimble has a plain design and is 1/2" wide. This product has a rod type movement, with one half inch available for measuring depth. When it comes to taking accurate measurements, the Mitutoyo 141-233 Inside Micrometer Head is the tool you need on hand.

The Mitutoyo 147-202 Can Seam Micrometer is designed to measure the width, height and depth of can seams. It measures the width, height and depth of can seams, which are used in sprayer cans. The tool has a range of 0 to 13mm with an accuracy of +/-0.00012 in. The micrometer also features a resolution of 0.01mm and an operation type that is mechanical. The dimension type includes inch/metric, while the minimum measurement for this product is 0 in., and its maximum measurement is 0.05 in.. The Mitutoyo 147-202 Can Seam Micrometer will allow you to measure can seams precisely so you know what needs to be done when it comes time for repair or replacement.

The Mitutoyo 182-203 Steel Rule, Flexible is a flexible ruler that offers exceptional accuracy. This steel rule has a 32nds and 64ths front graduation and 10ths and 100ths back graduation. The black nonglare satin chrome finish makes it easy to read the graduations from both sides of the ruler. Made of tempered stainless steel, this 6 in. flexible rule is very durable. It also has a 1/2 in. width for increased strength and rigidity when measuring large objects. If you need a high quality tool to help with your measuring needs, then the Mitutoyo 182-203 Steel Rule, Flexible is perfect for you.

The Mitutoyo 184-313S Feeler Gage is a versatile tool that you can use to measure the gap between surfaces. It comes with steel leaves of various thicknesses and blade widths. This set contains 0.05 mm to 0.3 mm by 0.05 mm, 0.4 mm to 1 mm by 0.1 mm thick blades in 28 leaves, so you will always have the right size for your project or job application. The blade material is made of steel, while the color is silver and the dimension type is metric. This feeler gauge has a blade width of 13mm and a thickness range from 0.05mm to 1mm, allowing you to take accurate measurements easily and conveniently wherever you are working on your project or job application without having to bring extra tools along with you when travelling around town or going out of town for work purposes. If you want an accurate way to measure spaces between surfaces like in engine compartments or other tight areas where tools cannot reach easily, then this Mitutoyo 184-313S Feeler Gage might be just what you need.

The Mitutoyo 186-101 Radius Gage Set contains 15 pairs of leaves that can measure concave and convex radii. The radius gage set is available in a hard case with an accuracy of +/-.0016 in /.04mm, which makes it ideal for measuring very small radii. This radius gage set comes with 30 leaves that are divided into 15 pairs of leaves. It also has a measurement range from 1/32 to 1/4 in by 64ths with increments of 1/32 in to 1/4 in. The gages have an accuracy of +/-.0016 in /.04mm which makes them suitable for extremely accurate measurements on very small items or parts where tolerances are measured in thousandths or even hundredths of an inch rather than fractions. Given its high level of precision, this Mitutoyo 186-101 Radius Gage Set is definitely worth having around your workshop or home garage if you are doing any type of metalworking projects involving intricate details such as ornamental ironwork, furniture repair or restoration work on vintage cars, motorcycles or airplanes.

The Mitutoyo 186-102 Radius Gage Set is the ideal choice for checking flatness and roundness of workpieces. This concave and convex radius gage set contains 16 pairs of leaves, giving you a total of 32 leaves in all. The concave and convex radius gage set comes with an uncoated finish that provides superior performance even in high-temperature conditions. It has a range from 17/64 to 1/2 in by 64ths, with increments between 9/32 in to 33/64 in. Each leaf measures 17/64 to 1/2 in, making it easy for you to find the right size leaf for your project. You can also find its case type - hard case - quite useful as it helps protect your tools when not in use. If you are looking for a complete tool kit for your workshop or garage, then consider the Mitutoyo 186-102 Radius Gage Set.

The Mitutoyo 186-106 Radius Gage Set 32 Pairs is the ideal tool for accurately measuring concave and convex radii. This product comes with a wide range of sizes that will help you take accurate measurements every time. The radius gage set contains 32 pairs of leaves in various increments, ranging from 0.5 mm to 15 mm. These leaves are designed to measure both concave and convex radii between 7.5 mm and 15 mm. The configuration is fixed, which means it does not require a frame or a case to hold the leaves together when in use. Each leaf has a handle attached, so you can easily pick up each one without touching them directly with your hands, minimizing errors in measurement due to dirt or oil contamination on your skin. With this Mitutoyo 186-106 Radius Gage Set 32 Pairs, you can ensure that your projects will be carried out with accuracy every time.

The Mitutoyo 188-111 Screw Pitch Gage, V, Unified, 4 to 42 is a precise and durable thread pitch gauge that measures pitches from 4 to 42 TPI. It has a steel case with folding leaves for easy storage. The narrow design of the leaves makes it easier to measure finer pitches without any difficulty. This includes 30 leaves in total and they are all made of steel. Each leaf features flattened teeth on both sides so you can easily read measurements when they overlap each other. If you want to ensure accuracy when measuring your screws' threads, then this Mitutoyo 188-111 Screw Pitch Gage is definitely worth checking out.

The MITUTOYO 500-173-30 Absolute Digital Caliper is the perfect tool for taking measurements of small objects. It has a 4-way digital caliper, allowing you to take measurements in different ways. The digital caliper features a rolling thumb wheel, control buttons on the face and an absolute scale. The 0 to 12" range allows you to measure small objects with ease. With a resolution of 0.0005 in/0.01 mm, this stainless steel digital caliper is highly accurate and reliable. The MITUTOYO 500-173-30 Absolute Digital Caliper is the perfect tool for your precision measuring needs.

The MITUTOYO 513-442-10T Dial Test Indicator Set is a high-quality instrument for checking work. The tilting head allows you to read the dial from any angle. This model has a range of 0 in to 0.06 in, making it suitable for many different types of work. Its graduation is 0.0005 in and its accuracy is +/-0.0005 in, ensuring that measurements are accurate and precise. With a satin chrome finish, this indicator will resist corrosion and maintain its polished appearance over time. The white dial face makes it easy to read numbers on the indicator's graduated scale, which ranges from 0 to 15 on the right side and 0 at the bottom left corner. The MITUTOYO 513-442 10T Dial Test Indicator Set is an efficient tool that you will want to use for your next project.

The MITUTOYO 543-392 Electronic Indicator is the perfect tool for calibrating or checking machines. The indicator features an absolute encoder scale, which allows you to zero out the unit at any point on the scale. It also has a zero set function that lets you zero out the indicator before taking measurements. The indicator has preset, go/no go and change counting direction functions as well. You can switch between inch and millimeter modes with this digital indicator. Additionally, it comes with an SPC output port for attaching it to your machine's SPC system. For professionals who work in manufacturing and production, this MITUTOYO Electronic Digital Indicator is a must have.

The Mitutoyo 568-936 Bore Gage Set is the perfect tool for making precise measurements on holes, drills and wire gauges. It can measure within a measuring range of 2 in to 4 in with an accuracy of 0.00005 in/0.001 mm. The bore gage set features carbide and titanium contact points, as well as a 3 point contact style. Its zero setting function makes it easy to zero out the device for accurate measurements every time. This digital bore gauge set also has data hold and preset functions that allow you to conveniently store or recall measurements without having to write them down manually. When it comes to measuring small parts accurately, look no further than the Mitutoyo 568-936 Bore Gage Set.

The Mitutoyo 7014-10 Mini-Magnetic Stand is a handy indicator holder. It can be used to hold your indicators for layout and assembly applications. This mini magnetic stand features a flat base with a post type arm. The Mitutoyo 7014-10 Mini-Magnetic Stand will give you the ability to keep your indicators secure while doing work on your project.

The MITUTOYO 811-331-10 Analog Durometer is a hand held device that allows you to determine the hardness of materials. The hard material tester has a range of 10 to 90, and an easy to read dial with large numbers. It also features a blunt taper indenter for testing the indentation hardness of soft materials such as rubber and plastics. This durable durometer comes with both a standard scale and a Shore A scale. The MITUTOYO 811-331-10 Analog Durometer is an essential tool for those working in product development or design.

The MITUTOYO 811-336-10 Digital Durometer is a must-have tool for evaluating the hardness of materials. It will give you the ability to measure precisely with its wide range and accurate readings. The blunt taper indenter allows you to accurately indent the material being tested, ensuring accurate results. With a resolution of 0.1 HA, this handheld durometer provides highly precise measurements in an easy to read display. A digital indicator makes it easy to zero set the device before taking measurements, while its data/hold function ensures that your readings are saved even when there is no power supply. This MITUTOYO Digital Handheld Durometer will help you achieve high accuracy in your work by providing dependable readings every time.