CategoryL2: Cutting Tools

Products with this attribute (3110 total)

Speed Cut Auger Bits. Quad Flute Design For Fast Chip Ejection. Full Screw Tip Allows Bit To Self-Feed. Non-Stick Coating Resists Sap And Heat Build Up While Cutting. Power Drive Shank Fits All Electric Drills And Quick Change Adapters. 10X Fast Than Flat Wood Spade Bits.
Speed Cut Auger Bits. Quad Flute Design For Fast Chip Ejection. Full Screw Tip Allows Bit To Self-Feed. Non-Stick Coating Resists Sap And Heat Build Up While Cutting. Power Drive Shank Fits All Electric Drills And Quick Change Adapters. 10X Fast Than Flat Wood Spade Bits.
Spline Drill Bit,1-1/2x17x22in.,4-Cutter
Spline Drill Bit,1-1/4x31x36in.,4-Cutter
Spline Drill Bit,1-3/8x17x22in.,4-Cutter
Spline Drill Bit,2x18x22 in.,4-Cutter
Spline Drill Bit,3/4x11x16 in.,4-Cutter
Spline Drill Bit,3/4x17/22 in.,4-Cutter
Spline Drill Bit,3/4x24x29 in.,4-Cutter
Spline Drill Bit,5/8x24x29 in.,4-Cutter
Spline Drill Bit,5/8x5x10 in.,4-Cutter
Spline Hammer Core Bit,2-5/8x22 in.
Spline Hammer Core Bit,2x11-3/8 in.
Spline Hammer Core Bit,2x22 in.
Spline Hammer Core Bit,3-1/8x22 in.
Spline Hammer Core Bit,4x11-3/8 in.
Spline Hammer Core Bit,5x22 in.
Spot Weld Drill Bits, Double Ended. Modified Center Spur Designed To Cut Welds On The Top Panel, Leaving The Back Panel Slightly Penetrated. Made From Premium Cobalt Steel For A Longer Useful Tool Life.
Spot Weld Drill Bits. Modified Center Spur Designed To Cut Welds On The Top Panel, Leaving The Back Panel Slightly Penetrated. Made From Premium Cobalt Steel For A Longer Useful Tool Life.
STI Tap,#10-24 NC,HSS,Uncoated,3 Flutes, Right Hand
STI Tap,#6-32 NC,HSS,Uncoated,3 Flutes, Right Hand
Straight Flute Hand Tap , 4 Flutes, UNC
Straight Flute Hand Tap , 6 Flutes,
Straight Flute Tap, Series 2000N, Imperial, UNC, 256, Bottoming Chamfer, 3 Flutes, HSS, Black Oxi
Straight Flute Tap, Series 2000N, Imperial, UNC, 3816, Plug Chamfer, 4 Flutes, HSS, Black Oxide,
Straight Flute Tap, Series 2000N, Imperial, UNC, 440, Tapered Chamfer, 3 Flutes, HSS, Black Oxide
Straight Flute Tap, Series 2000N, Imperial, UNC, 51618, Plug Chamfer, 4 Flutes, HSS, Black Oxide,
Straight Flute Tap, Series 2000N, Imperial, UNF, 1220, Tapered Chamfer, 4 Flutes, HSS, Black Oxid
Straight Flute Tap, Series 2000N, Imperial, UNF, 1228, Tapered Chamfer, 4 Flutes, HSS, Black Oxid
Straight Flute Tap, Series 2000N, Imperial, UNF, 264, Bottoming Chamfer, 3 Flutes, HSS, Black Oxi
Straight Flute Tap, Series 2000N, Imperial, UNF, 264, Tapered Chamfer, 3 Flutes, HSS, Black Oxide
Straight Flute Tap, Series 2000N, Imperial, UNF, 91618, Plug Chamfer, 4 Flutes, HSS, Black Oxide,
Stubby Drill Bit 19/64 Overall Length 2-3/4 Cutting Length 1-9/16
Stubby Drill Bit 5/16 Overall Length 2-13/16 Cutting Length 1-5/8
Stubby Drills, Fractional Screw Machine Length Drill Bits. Stubby Drills Are Manufactured From Quality, Industrial High Speed Steel. Special Heat Treatment, Results In Cutting Edges That Remain Sharp Longer When Drilling Tough Materials. 135 Degree Split Point, Ground From Solid Black Finish High Speed Steel. Anis Specifications.
Stubby Drills, Fractional Screw Machine Length Drill Bits. Stubby Drills Are Manufactured From Quality, Industrial High Speed Steel. Special Heat Treatment, Results In Cutting Edges That Remain Sharp Longer When Drilling Tough Materials. 135 Degree Split Point, Ground From Solid Black Finish High Speed Steel. Anis Specifications.
Stubby Drills, Fractional Screw Machine Length Drill Bits. Stubby Drills Are Manufactured From Quality, Industrial High Speed Steel. Special Heat Treatment, Results In Cutting Edges That Remain Sharp Longer When Drilling Tough Materials. 135 Degree Split Point, Ground From Solid Black Finish High Speed Steel. Anis Specifications.
Stubby Drills, Fractional Screw Machine Length Drill Bits. Stubby Drills Are Manufactured From Quality, Industrial High Speed Steel. Special Heat Treatment, Results In Cutting Edges That Remain Sharp Longer When Drilling Tough Materials. 135 Degree Split Point, Ground From Solid Black Finish High Speed Steel. Anis Specifications.
Stubby Drills, Fractional Screw Machine Length Drill Bits. Stubby Drills Are Manufactured From Quality, Industrial High Speed Steel. Special Heat Treatment, Results In Cutting Edges That Remain Sharp Longer When Drilling Tough Materials. 135 Degree Split Point, Ground From Solid Black Finish High Speed Steel. Anis Specifications.
Stubby Drills, Fractional Screw Machine Length Drill Bits. Stubby Drills Are Manufactured From Quality, Industrial High Speed Steel. Special Heat Treatment, Results In Cutting Edges That Remain Sharp Longer When Drilling Tough Materials. 135 Degree Split Point, Ground From Solid Black Finish High Speed Steel. Anis Specifications.
Stubby Drills, Fractional Screw Machine Length Drill Bits. Stubby Drills Are Manufactured From Quality, Industrial High Speed Steel. Special Heat Treatment, Results In Cutting Edges That Remain Sharp Longer When Drilling Tough Materials. 135 Degree Split Point, Ground From Solid Black Finish High Speed Steel. Anis Specifications.
Stubby Drills, Fractional Screw Machine Length Drill Bits. Stubby Drills Are Manufactured From Quality, Industrial High Speed Steel. Special Heat Treatment, Results In Cutting Edges That Remain Sharp Longer When Drilling Tough Materials. 135 Degree Split Point, Ground From Solid Black Finish High Speed Steel. Anis Specifications.
Stubby Drills, Number Screw Machine Length Drill Bits. Stubby Drills Are Manufactured From Quality Industrial High Speed Steel. Special Heat Treatment, Results In Cutting Edges That Remain Sharp Longer When Drilling Tough Materials.
Stubby Drills, Number Screw Machine Length Drill Bits. Stubby Drills Are Manufactured From Quality Industrial High Speed Steel. Special Heat Treatment, Results In Cutting Edges That Remain Sharp Longer When Drilling Tough Materials.
Stubby Drills, Number Screw Machine Length Drill Bits. Stubby Drills Are Manufactured From Quality Industrial High Speed Steel. Special Heat Treatment, Results In Cutting Edges That Remain Sharp Longer When Drilling Tough Materials.
Tap Set, Straight Flute, Series 2000N, Imperial, 3 Piece, 264 Size, UNF Thread Standard, 716 Th
Tap Set, Straight Flute, Series 2000N, Imperial, 3 Piece, 440 Size, UNC Thread Standard, 916 Th
Taper Pipe, 5 Flutes, NPT
Taper Pipe, 5 Flutes, NPTF
Taper, 7 Flutes, NPT
TB05891-0 BHR8-00050 Broach Holder
This carbide aluminum end mill has been designed specially for milling Aluminum and all non-ferrous materials. The unique geometry permits much higher speed and feed rates without loading. Spindle and feed rates can be increased by fifty percent for greater productivity with excellent piece/part finishes
This carbide aluminum end mill has been designed specially for milling Aluminum and all non-ferrous materials. The unique geometry permits much higher speed and feed rates without loading. Spindle and feed rates can be increased by fifty percent for greater productivity with excellent piece/part finishes.
This series has added strength and stability with the same geometry of our standard length series. Stub end mills are specifically designed for shallow milling, contour milling and slotting
Titanium Drill Bit 3/16" Overall Length 3-1/2"
Titanium Drill Bit 7/32" Overall Length 3-3/4"
Titanium Drill Bit. Titanium Nitrate Coating Resists Heat And Adds Lubricity To Extend Drill Life. Designed For Precision Drilling In Metal, Wood And Plastic. No Center Punch Needed: Century Quick-Cut Points Are Self-Centering And Penetrate Faster With Less Pressure...Will Not "Walk" Or "Wander" At The Starting Surface.
Titanium Drill Bit. Titanium Nitrate Coating Resists Heat And Adds Lubricity To Extend Drill Life. Designed For Precision Drilling In Metal, Wood And Plastic. No Center Punch Needed: Century Quick-Cut Points Are Self-Centering And Penetrate Faster With Less Pressure...Will Not "Walk" Or "Wander" At The Starting Surface.
Titanium Drill Bit. Titanium Nitrate Coating Resists Heat And Adds Lubricity To Extend Drill Life. Designed For Precision Drilling In Metal, Wood And Plastic. No Center Punch Needed: Century Quick-Cut Points Are Self-Centering And Penetrate Faster With Less Pressure...Will Not "Walk" Or "Wander" At The Starting Surface.
Titanium Drill Bit. Titanium Nitrate Coating Resists Heat And Adds Lubricity To Extend Drill Life. Designed For Precision Drilling In Metal, Wood And Plastic. No Center Punch Needed: Century Quick-Cut Points Are Self-Centering And Penetrate Faster With Less Pressure...Will Not "Walk" Or "Wander" At The Starting Surface.
Titanium Drill Bit. Titanium Nitrate Coating Resists Heat And Adds Lubricity To Extend Drill Life. Designed For Precision Drilling In Metal, Wood And Plastic. No Center Punch Needed: Century Quick-Cut Points Are Self-Centering And Penetrate Faster With Less Pressure...Will Not "Walk" Or "Wander" At The Starting Surface.
Titanium Drill Bit. Titanium Nitrate Coating Resists Heat And Adds Lubricity To Extend Drill Life. Designed For Precision Drilling In Metal, Wood And Plastic. No Center Punch Needed: Century Quick-Cut Points Are Self-Centering And Penetrate Faster With Less Pressure...Will Not "Walk" Or "Wander" At The Starting Surface.
Titanium Drill Bit. Titanium Nitrate Coating Resists Heat And Adds Lubricity To Extend Drill Life. Designed For Precision Drilling In Metal, Wood And Plastic. No Center Punch Needed: Century Quick-Cut Points Are Self-Centering And Penetrate Faster With Less Pressure...Will Not "Walk" Or "Wander" At The Starting Surface.
Titanium Drill Bit. Titanium Nitrate Coating Resists Heat And Adds Lubricity To Extend Drill Life. Designed For Precision Drilling In Metal, Wood And Plastic. No Center Punch Needed: Century Quick-Cut Points Are Self-Centering And Penetrate Faster With Less Pressure...Will Not "Walk" Or "Wander" At The Starting Surface.
Titanium Drill Bit. Titanium Nitrate Coating Resists Heat And Adds Lubricity To Extend Drill Life. Designed For Precision Drilling In Metal, Wood And Plastic. No Center Punch Needed: Century Quick-Cut Points Are Self-Centering And Penetrate Faster With Less Pressure...Will Not "Walk" Or "Wander" At The Starting Surface.
Titanium Drill Bit. Titanium Nitrate Coating Resists Heat And Adds Lubricity To Extend Drill Life. Designed For Precision Drilling In Metal, Wood And Plastic. No Center Punch Needed: Century Quick-Cut Points Are Self-Centering And Penetrate Faster With Less Pressure...Will Not "Walk" Or "Wander" At The Starting Surface.
Titanium Drill Bit. Titanium Nitrate Coating Resists Heat And Adds Lubricity To Extend Drill Life. Designed For Precision Drilling In Metal, Wood And Plastic. No Center Punch Needed: Century Quick-Cut Points Are Self-Centering And Penetrate Faster With Less Pressure...Will Not "Walk" Or "Wander" At The Starting Surface.
Titanium Drill Bit. Titanium Nitrate Coating Resists Heat And Adds Lubricity To Extend Drill Life. Designed For Precision Drilling In Metal, Wood And Plastic. No Center Punch Needed: Century Quick-Cut Points Are Self-Centering And Penetrate Faster With Less Pressure...Will Not "Walk" Or "Wander" At The Starting Surface.
Titanium Drill Bit. Titanium Nitrate Coating Resists Heat And Adds Lubricity To Extend Drill Life. Designed For Precision Drilling In Metal, Wood And Plastic. No Center Punch Needed: Century Quick-Cut Points Are Self-Centering And Penetrate Faster With Less Pressure...Will Not "Walk" Or "Wander" At The Starting Surface.
TK00410-0 Jetbroach One-Touch 40x50
TK00517-0 Annular Cutter 11/16x 1-3/8
TK00560-0,Annular Cutter,3/4x2
TK00561-0,Annular Cutter,13/16x2
TK00562-0,Annular Cutter,7/8x2
TK00580-0 Jetbroach One-Touch
TK00582-0 H.B.One-Touch 9/16"x 1"L
TK00583-0 H.B.One-Touch 5/8 In.x 1 In.L
TK00584-0 Annular Cutter 11/16x 1 Hss
TK00651-0 Jb One-Touch 2-1/2x 2 In. L
TK00806-0 Annular Cutter 5/8x 2 Hss
TK00809-0 Hi-Broach One-Touch 3/4 In.x 2 In.
TK00818-0 Hi-Broach One-Touch 1-5/16 In.x2 In.
TK00989-0 Jetbroach 1-Touch 1-1/4"x 3
TMGP 1 X 8 .740
Turning Insert, Package Quantity 10
Two flute carbide end mill with corner radius allows more strength and minimizes chipping on corners. Two flute construction provides more chip space and clearance than three or four flute designs.
Two flute carbide end mill with corner radius allows more strength and minimizes chipping on corners. Two flute construction provides more chip space and clearance than three or four flute designs.
UK00796-0 H.B.One Touch 1/2"x1"L
UK00799-0 H.B.One-Touch 7/16"x1
UK00803-0 Annular Cutter 7/16x2 Hss
UK00804-0 H.B.One-Touch 1/2 In.x2 In.
Vortex-Point 1" 130-VT
Vortex-Point 13/16" 130-VT
Vortex-Point 3/4" 130-VT
Vortex-Point 7/8" 130-VT
Wire Gauge Brite Drill Bits. Made From Feature Premium Grade High Speed Steel. Precision Ground Points. Designed To Operate In Stationary Or Portable Tools. General Purpose Drilling In Wood, Metal And Plastic. Numbered Drill Bits.
Wire Gauge Brite Drill Bits. Made From Feature Premium Grade High Speed Steel. Precision Ground Points. Designed To Operate In Stationary Or Portable Tools. General Purpose Drilling In Wood, Metal And Plastic. Numbered Drill Bits.
Wire Gauge Brite Drill Bits. Made From Feature Premium Grade High Speed Steel. Precision Ground Points. Designed To Operate In Stationary Or Portable Tools. General Purpose Drilling In Wood, Metal And Plastic. Numbered Drill Bits.
X1 Spade Bits work fast and get clean holes. Extended spurs cut crisp, clean holes in thick stock effortlessly and each bit is forged and heat-treated to withstand rigorous use. The 1/4 in. quick-change shank works with drills or impact drivers. These spade bits are perfect for many remodeling projects around the home as well as woodworking applications.
X1 Spade Bits work fast and get clean holes. Extended spurs cut crisp, clean holes in thick stock effortlessly and each bit is forged and heat-treated to withstand rigorous use. The 1/4 in. quick-change shank works with drills or impact drivers. These spade bits are perfect for many remodeling projects around the home as well as woodworking applications.