CatId: ['228013']

Products with this attribute (75829 total)

Cartridge, Fits Brand Moen, Finish Unfinished, For Use With Mfr. Model Number 74998, 800, 8780, 8810, TS6720, Use With Water Temp. Hot/Cold

Case formed of heavy gauge steel for strength and assures solid fit in door preparations. Most interior parts are made of solid brass for maximum strength and smooth operation. DOOR PREP: 1-5/8" and 2-1/8" as specified by model number. DOOR THICKNESS: Fits 1-3/4" doors. CYLINDER: Housing protected with free-turning exterior cylinder guard fabricated from solid brass to resist gripping or twisting. Supplied with KW1 keyway and 2 silver nickel keys. 5-pin keying. 1/2" low profile projection. FACEPLATE: 1" x 2-1/4". STRIKES: Specially designed reinforcing, constructed of high grade steel for strength and durability. Installed with 4 security jamb screws (including two 3" screws that resist tampering and guard against theft) and dust box; and is covered with an armored front to conceal fasteners. BOLT: Solid brass 1" throw, when extended, with hardened steel insert for maximum protection and security. HANDING: Non-handed. ANSI/BHMA: A 156.5 Grade 3.

Case formed of heavy gauge steel for strength and assures solid fit in door preparations. Most interior parts are made of solid brass for maximum strength and smooth operation. DOOR PREP: 1-5/8" and 2-1/8" as specified by model number. DOOR THICKNESS: Fits 1-3/4" doors. CYLINDER: Housing protected with free-turning exterior cylinder guard fabricated from solid brass to resist gripping or twisting. Supplied with KW1 keyway and 2 silver nickel keys. 5-pin keying. 1/2" low profile projection. FACEPLATE: 1" x 2-1/4". STRIKES: Specially designed reinforcing, constructed of high grade steel for strength and durability. Installed with 4 security jamb screws (including two 3" screws that resist tampering and guard against theft) and dust box; and is covered with an armored front to conceal fasteners. BOLT: Solid brass 1" throw, when extended, with hardened steel insert for maximum protection and security. HANDING: Non-handed. ANSI/BHMA: A 156.5 Grade 3.

CASMA-UFL-10 Multi-Tech Systems Inc. | Cable Assemblies | DigiKey

Cass Stone pavers offer an Old English design and come in a variety of sizes: 16 in. x 16 in. 8 in. x 16 in. and 8 in. x 8 in. slabs and are 1.5 in. thick. Once installed the pavers can be left to naturally age with time and weather or can be sealed with a concrete sealant in order to enhance and protect the original colors. This three piece system is easily installed and uses a blend of colors.

Cast Copper Union C x C 1 1/2" | AF Supply

Cast Copper Union C x C 1 1/4" | AF Supply

Castillo 11 Inch 2 Light Flush Mount | Capitol Lighting

Castillo 13 Inch 2 Light Flush Mount | Capitol Lighting

Cat2 Arcflash Coat Size 2Xl

Cat2 Arcflash Coat Size 4Xl

Cat2 Arcflash Coat Size 4Xl

Cat2 Arcflash Coat Size 5Xl

Cat3 Arcflash Coverall Size Large

Cat3 Arcflash Hood, Hard Cap

Catalyst Mixer,Steel,22" Length

Caulk Gun Nozzle System, Product Type Nozzle Tip, For Container Size Not Applicable, For Container Type Sausage Pack, For Use With Bulk and Sausage Guns, Material Plastic, Application Automotive, Construction, Glazing, Roofing, Waterproofing, Color Black, Yellow, Includes Ball Joint, (3) Cone Nozzles

Caulk Gun, Thrust Ratio 10:1, For Container Size 10 oz, Barrel Materials Steel, Frame Style Skeleton, Grip Style Standard, Material Metal, Plunger Type Smooth Rod, Product Type Caulk Gun, For Container Type Cartridge, Includes Ladder Hook, Puncture Tool, Spout Cutter

Caulk Gun, Thrust Ratio 6:1, For Container Size 10 oz, Barrel Materials Steel, Frame Style Half Barrel, Grip Style Comfort, Material Metal, Plunger Type Ratchet Rod, Product Type Caulk Gun, Color Silver, For Container Type Cartridge, Includes Ladder Hook, Puncture Tool, Spout Cutter

Caulk Gun,Bulk,Silver,24 Oz

Caulk Gun,Steel,10.3 Oz,Red/Black,Cutter

Caution Eye Protection Required Sign,Bil

Cbh Hammer Tip 1.375In. Dia.

CC Pump Motor, 3-Ph, TEFC, 2HP, 145JM

CD74HC107E - RCA - Integrated Circuits

CDAT1170 <br />Features: <ul> <li>Drill bit</li> <li>Heavy duty grade carbide tip for hardness and durability</li> <li>High-temperature copper brazing reduces the risk of losing carbide tip during difficult drilling applications</li> <li>Heat treated body to assure stability and uniformity from tip to shank</li> <li>Small land and wide flute design for less heat build up and maximum debris removal</li> <li>Positive drive slot shank fits all popular SDS drills</li> </ul> <br /> Dimensions: <ul> <li>6.75'' H x 1.5'' W x 0.25'' D: 0.08 lb</li> <li>8.75'' H x 1.5'' W x 0.25'' D: 0.09 lb</li> <li>20'' H x 1.5'' W x 0.5'' D: 0.39 lb</li> <li>10.5'' H x 1.5'' W x 0.5'' D: 0.53 lb</li> </ul> <br />

CDAT1171 <br />Features: <ul> <li>Drill bit</li> <li>Zinc plated material</li> <li>Spiral design rapidly removes debris for improved performance in conventional cordless or electric drills</li> <li>Precision electronically brazed special grade tungsten carbide tips</li> <li>Drill in brick concrete stone marble tile plaster and other masonry materials</li> </ul> <br /> Dimensions: <ul> <li>5.75'' H x 1.75'' W x 0.25'' D: 0.01 lb</li> <li>6.75'' H x 1.75'' W x 0.25'' D: 0.03 lb</li> <li>6.88'' H x 1.5'' W x 1.5'' D: 0.51 lb</li> <li>8.5'' H x 1.75'' W x 0.5'' D: 0.06 lb</li> </ul> <br />

CDAT1172 <br />Features: <ul> <li>Drill bit</li> <li>Wide flute design handle the high impact shock associated with hammer drilling</li> <li>Designed for electric drills and rotary percussion drills with conventional chucks</li> <li>Black oxide treated for heat resistance and improved lubricity</li> <li>Precision electronically brazed special grade tungsten carbide tip for drilling a variety of masonry materials</li> <li>Used for drilling brick concrete stone slate marble tile plaster and other masonry materials</li> </ul> <br /> Dimensions: <ul> <li>7'' H x 1.5'' W x 1.5'' D: 0.5 lb</li> <li>6.75'' H x 1.75'' W x 0.25'' D: 0.02 lb</li> <li>8.5'' H x 1.75'' W x 0.5'' D: 0.07 lb</li> <li>7'' H x 1.5'' W x 1.5'' D: 0.58 lb</li> </ul> <br />

CDAT1178 <br />Features: <ul> <li>Drill bit</li> <li>Designed for general purpose use in wood plastic plaster and soft metal</li> <li>Offer a 2 times life rating when compared to standard 118 degree point drills</li> <li>Century 135 degree quick cut points are self-centering and penetrate faster with less pressure</li> </ul> <br /> Color/Finish: <ul> <li>Premium high speed steel and duotone finish for fast chip removal</li> </ul> <br /> Dimensions: <ul> <li>5.75'' H x 1.75'' W x 0.06'' D: 0.01 lb</li> <li>6.75'' H x 1.75'' W x 0.25'' D: 0.02 lb</li> <li>8'' H x 1.75'' W x 0.5'' D: 0.06 lb</li> <li>8.5'' H x 1.75'' W x 0.5'' D: 0.16 lb</li> </ul> <br />

CDAT1212: Features: -Saw blade.-Material: Spring steel.-Precision cut teeth for fast smooth cutting in variety of materials.-6-0.5" pin distance fits all standard coping saws.-Made in the USA. Includes: -6 Piece set includes 10T 15T and 18TS scroll saw blades. Dimensions: -9.5'' H x 1.75'' W x 0.75'' D, 0.03 lbs.

CDAT1242 <br />Features: <ul> <li>Saw blade</li> <li>Material: Tungsten carbide</li> <li>Cutting edge of Tungsten carbide particles are bonded to an alloy steel back</li> <li>High heat resistance with no teeth to dull or ship for greater wear resistance and a longer tool life</li> <li>Carbide grit blades never require resharpening</li> <li>Used to cut ceramic tile cast iron thin masonry stone slate and marble</li> </ul> <br /> Dimensions: <ul> <li>6.75'' H x 1.75'' W x 0.06'' D, 0.02 lbs</li> </ul> <br />

CDAT1386 <br />Features: <ul> <li>Saw blade</li> <li>Material: Tungsten carbide</li> <li>Cutting edge of Tungsten carbide particles are bonded to an alloy steel back</li> <li>High heat resistance with no teeth to dull or ship for greater wear resistance and a longer tool life</li> <li>Carbide grit blades never require resharpening</li> <li>Used to cut ceramic tile cast iron thin masonry stone slate and marble</li> </ul> <br /> Dimensions: <ul> <li>6.75'' H x 1.75'' W x 0.06'' D, 0.02 lbs</li> </ul> <br />

CDAT1426 <br />Features: <ul> <li>Drill bit</li> <li>Material: Premium grade high speed steel</li> <li>Precision ground 118 degree points</li> <li>Designed to operate in stationary or portable tools</li> <li>General purpose drilling in wood metal and plastic</li> </ul> <br /> Dimensions: <ul> <li>5'' H x 1.75'' W x 0.06'' D, 0.01 lbs</li> </ul> <br />

CDAT1426 <br />Features: <ul> <li>Drill bit</li> <li>Material: Premium grade high speed steel</li> <li>Precision ground 118 degree points</li> <li>Designed to operate in stationary or portable tools</li> <li>General purpose drilling in wood metal and plastic</li> </ul> <br /> Dimensions: <ul> <li>5'' H x 1.75'' W x 0.06'' D, 0.01 lbs</li> </ul> <br />

CDAT1556 <br />Features: <ul> <li>Screwdriving bit</li> <li>Premium grade steel material</li> <li>Ensure optimal performance in all applications</li> <li>Century's patented heat treatment process provides maximum shock absorption associated with impact ready power tools</li> <li>Precision ground tips for mazimum contact and secure grip</li> <li>Use in standard and cordless impact drivers</li> <li>Size: #2</li> </ul> <br /> Dimensions: <ul> <li>5'' H x 1.75'' W x 0.25'' D, 0.02 lb</li> </ul> <br />

CDAT1592 <br />Features: <ul> <li>Nutsetter</li> <li>Use in high torque and standard drivers</li> <li>Magnetic tip for fast and easy nut driving</li> <li>Approximately 1.875 length</li> <li>Power drive shank size: 0.25''</li> </ul> <br /> Dimensions: <ul> <li>5'' H x 1.75'' W x 0.5'' D 0.05 lb</li> <li>5'' H x 1.75'' W x 0.75'' D 0.09 lb</li> </ul> <br />

CDAT1633 <br />Features: <ul> <li>Screwdriver</li> <li>Precision ground black oxide tips fit screw heads tightly for decreased slippage</li> <li>Ergonomic cushion handles provide comfort and improved grip</li> </ul> <br /> Dimensions: <ul> <li>6.5'' H x 2'' W x 1.375'' D 0.1 lb</li> <li>10.5'' H x 2'' W x 1.375'' D 0.2 lb</li> </ul> <br />

CDAT1634 <br />Features: <ul> <li>Drill bit</li> <li>Chrome vanadium steel material</li> <li>Designed to work for all wood projects especially suited for furniture making cabinetry and doweling where an exact hole is required</li> <li>Use in hand drills electric drills drill presses and lathes</li> </ul> <br /> Dimensions: <ul> <li>5.75'' H x 1.75'' W x 0.25'' D: 0.02 lb</li> <li>6.75'' H x 1.75'' W x 0.25'' D: 0.03 lb</li> <li>8'' H x 1.75'' W x 0.5'' D: 0.07 lb</li> <li>8.5'' H x 1.75'' W x 0.5'' D: 0.11 lb</li> </ul> <br />

CDAT1665 <br />Features: <ul> <li>Drill bit</li> <li>Cuts treated wood and poles wherever deep clean holes are required</li> <li>Use in power drill or hand brace</li> <li>Features a single cutter and spur design with a solid center twist for reduced vibration</li> <li>Shank size: 0.38''</li> </ul> <br /> Dimensions: <ul> <li>9'' H x 1.125'' W x 1.125'' D: 0.13 lb</li> <li>9'' H x 1.5'' W x 1.5'' D: 0.62 lb</li> <li>9'' H x 2'' W x 2'' D: 1.24 lbs</li> <li>20'' H x 1.25'' W x 1.25'' D: 0.45 lb</li> <li>20'' H x 1.5'' W x 1.5'' D: 1.8 lbs</li> <li>19.5'' H x 1.625'' W x 1.625'' D: 2.23 lbs</li> <li>20.75'' H x 1.625'' W x 1.625'' D: 2.62 lbs</li> <li>20'' H x 2'' W x 2'' D: 3.11 lbs</li> </ul> <br />

CDM-SA/R 150W/942 - 150W 207V Ceramic Arc Tube Metal Halide | Topbulb

CDM-T 70 /925 Philips MasterColor 70w G12 2500K HID Light Bulb

CDM330/U/O/4K-BULB