Certification_status: ['Compliant'] (Page 22)

<ul><li>Tire spoon with axle nut hex wrench and tire spoon hex wrench for rimlock nut set</li><li>Both levers have perfectly contoured tire lever on one end</li><li>One lever has unique combination stepped 12/13mm box end wrench on otherend for turning rim lock nuts </li><li>Second wrench available in 22, 24, 27 and 32mm hex box wrench for axlenuts</li><li>Made from lightweight forged 7075 T-6 aluminum</li><li>Hard anodized finish</li><li>Under 10 inches in length and weigh only 3.5 oz.</li><li>Hex ends for axle nuts are rated for a maximum torque of 90 ft-lbs</li></ul>

Mustang's Sport Touring Solo seat offers the rider the comfort of a touring seat with a sporty, stylish look and a totally adjustable, removable backrest. Seat skirt has a braided edge trim and a no-frills Vintage look.<ul><li>Sport Touring seats offer the rider the comfort of a touring seat with a sporty, stylish look</li><li>Available with and without a driver backrest</li><li>Seat width is 15", rear seat sold separately</li><li>Made in USA</li><li>Mustang part # 79534</li></ul>Note: Will not fit with stock rear seat.

<li>High performance pistons that last</li><li>Anodized piston dome withstand high temps</li>

<li>Made with performance materials for reliability</li><li>Meets or exceeds OEM specifications</li>

<li>Teflon coated for maximum life and resistance</li><li>Anodized piston dome withstand high temps</li>

<li>Teflon coated for maximum life and resistance</li><li>Hypereutectic castings withstand high temps</li>

#5 Shur Plug Clear PVC Cover <li>BRAND: Namz</li> <li>MPN: NH-606002</li> <li>Additional Info: Female Terminals - 50-pk</li>

2-Up Backrest Luggage Rack <li>BRAND: Motherwell</li> <li>MPN: MWL-165B</li> <li>COLOR: Matte Black</li>

Daytripper Seat <li>BRAND: Mustang</li> <li>MPN: 76387</li>

Large Hex-Type Main Jets (K4-042) <li>BRAND: Mikuni</li> <li>MPN: 4/042-380</li> <li>SIZE: Size 380</li>

Passenger Pads for Chopped Tour-Pak <li>BRAND: Mustang</li> <li>MPN: 76870</li> <li>COLOR: Vintage</li>

Power Synthetic 4T <li>BRAND: Motorex</li> <li>MPN: 111011</li> <li>SIZE: 1 liter</li> <li>Additional Info: 5W40</li>

Studded Standard Style Seat <li>BRAND: Mustang</li> <li>MPN: 75076</li>

Studded Thin Rear Seat <li>BRAND: Mustang</li> <li>MPN: 76176</li>

Vintage Solo Seat <li>BRAND: Mustang</li> <li>MPN: 76157</li>

Wide Solo Seat <li>BRAND: Mustang</li> <li>MPN: 75353</li> <li>Additional Info: No Studs</li>

Wide Touring One-Piece Seat <li>BRAND: Mustang</li> <li>MPN: 75008</li> <li>Additional Info: Studded</li>

Wide Touring Solo Seat with Driver Backrest <li>BRAND: Mustang</li> <li>MPN: 79452</li> <li>Additional Info: Studded</li>

Wide Touring Two-Piece Seat with Driver Backrest <li>BRAND: Mustang</li> <li>MPN: 79327</li> <li>Additional Info: Vintage</li>

Wide Touring Two-Piece Seat with Driver Backrest <li>BRAND: Mustang</li> <li>MPN: 79560</li> <li>Additional Info: Studded</li>

Wide Touring Vintage Recessed Rear Seat <li>BRAND: Mustang</li> <li>MPN: 79131</li>

X8 Patella Fit Kit <li>BRAND: MOBIUS</li> <li>MPN: 2040203</li> <li>SIZE: Md</li>

<ul> <li> Model: Yamaha</li> </ul> Model : 1/12 Yamaha FX

<ul> <li>14in. wide rear seat is slightly recessed in front to allow movement of the driver backrest</li> <li>Braided edge skirt, chrome studs</li> <li>Rear seat width: 14in.</li> <li>Made in USA</li> <li>Rear Width: 14in.</li> </ul>

<ul> <li>18 wide driver seat, 1 lower than stock, also sits the driver back 1</li> <li>Nose of the seat is narrower than stock so the driver can easily plant feet on the ground</li> <li>Passenger seat is a full 18.5 wide with a bucketed shape to eliminate sliding forward</li> <li>Seat comes complete with a wire harness that connects directly to the motorcycles fuse box</li> <li>Heated seats will install using direct plug and play on models with O.E.M.</li> </ul>

<ul> <li>Angled blade for easy access to tappets</li> </ul>

<ul> <li>Black vinyl coil-wound housing.</li> <li>Meets or exceeds OE quality.</li> <li>Made to exact inner and outer specifications to insure correct clearances for the inner wire.</li> <li>All cables have an inner polyethylene sleeve for long life and smooth operation</li> </ul>

<ul> <li>Both you and your passenger will experience the peak of comfort with the Summit Super Touring seat, designed for the 2014 Rushmore Line.</li> <li>The one-piece Super comfortable touring design provides the riderand passenger with the fullest, most comfortable seat possible.</li> <li>The 19 in. wide Super front bucket sits the driver 1.75 in. further back than the stock seat.</li> <li>The passenger seat is a full 16in. wide and fits perfectly with the Rushmore speakers and Tour-Pak.</li> <li></li> </ul>

<ul> <li>Building off of our CFT platform in 2013, we constructed the PODIUM bar from a hi tensile strength alloy for more durability.</li> <li>Although you give up some comfort in the flex of the material, it is more than made up for with the added strength CFT - Controlled Flex Technology Handlebar.</li> <li>Utilizes an elastomer shock system in the center of the cross bar, the CFT eliminates harsh vibrations and chatter caused by flex in non braced handlebars.</li> <li>By using a hi flex alloy, t</li> </ul>

<ul> <li>Carburetor top adapter, fits Mikuni throttle cable to late type Honda carburetor</li> </ul>

<ul> <li>Chrome studs all around</li> <li>Front bucket has a full skirt with braided edge trim and leather tied conchos</li> <li>Available as a complete 1-piece or a solo only</li> <li>Front width - 12in</li> <li>Rear width - 7.5in</li> </ul>

<ul> <li>Chrome-plated or matte black powder-coated racks made of 5/8 steel tubing; hold up to 10 lb.</li> <li>To ensure proper fitment please measure the spacing between sissy bar uprights, Measuring from inside to inside, the dimensions should be 7.5 inches</li> <li>Sissy bar and backrest not included.</li> </ul>

<ul> <li>Deeply contoured front bucket; passenger seat angles forward to support the riders back</li> <li>Premium-quality expanded vinyl cover</li> <li>Built-in steel support wings in the passenger seat</li> <li>One-piece or two-piece designs</li> <li>Studded style features studded skirt with conchos and a braid that extends below the edge of the seat</li> </ul>

<ul> <li>Designed to match the Sumit FL Touring Seat</li> <li>Driver backrest fits the receiver built into the Summit Seat</li> <li>Passenger backrest features rubber washer mounting system to eliminate troublesome soft stock isolators</li> <li>Passenger backrest arms are extended an extra 2in. and have thicker foam padding for added comfort</li> </ul>

<ul> <li>For use with Motion Pro 08-0289 32mm T-6 Combo Lever</li> <li>Adapter fits 27mm and 17mm axle nuts</li> <li>CNC machined from 6061 aluminum for precise fit and function</li> <li>Durable anodized finish with laser engraved markings for hex sizes</li> </ul>

<ul> <li>Guaranteed to be 100% waterproof</li> <li>Made from ripstop-designed soft PVC</li> <li>Front, middle and rear grommets for safety tie-downs</li> <li>Fully ventilated using the exclusive Cool-Vent system</li> <li>Sized to fit every bike and scooter</li> </ul>

<ul> <li>Intergrated zippered panel transforms roof into a convertible without removing top</li> <li>Zippered panel rolls up and securely pack under roof</li> <li>Perfect for sunset and night rides when the sun isnt beating down</li> <li>Made from rugged water-resistant UltraMax polyester</li> <li>UV treated for maximum protection against the suns harmful rays</li> </ul>

<ul> <li>Jody Perewitz, the fastest American woman on a V-Twin, has designed this low and lean solo seat for the 2006-up Dynas</li> <li>The 9.5 wide seat is built with quality in mind, featuring a marine-grade fiberglass baseplate and classic tuck-and-roll stitching framed by a carbon-fiber vinyl insert</li> <li>Includes a fender nut for ease in installation</li> </ul>

<ul> <li>Kit includes Motion Pro CR Pro throttle and throttle cable to work with stock carb (includes carb cap if needed)</li> <li>Designed for ultimate throttle performance</li> <li>Die-cast aluminum housing with black epoxy finish.</li> <li>Straight-pull assembly.</li> <li>Recommended for 34 mm or smaller straight-pull carburetors.</li> </ul>

<ul> <li>Lifetime warranty</li> <li>100% waterproof Tri-Max polyester with heat taped seams.</li> <li>Maximum UV protection against suns harmful rays</li> <li>Quickly secures using an integrated buckle system and rubber coated hooks</li> <li>Fits with OEM windshields</li> </ul>

<ul> <li>Like the 2-Up, but with a chopped top and a slimmer waist</li> <li>Great wind protection while allowing a clear view over the top</li> <li>Excellent choice for shorter riders or cruisers with lowered rear suspension</li> </ul>

<ul> <li>Manufactured to exact measurements to meet or exceed OEM specification</li> <li>Tempered steel wire housing with an inner nylon sleeve for long life and smooth operation</li> <li>Cables are individually packed in a poly sleeve with color coded header cards</li> <li>This premium cable features longitudinal wound wire housing embedded in polyurethane with a nylon lining to eliminate spring or compression</li> <li>A stainless inner wire resists corrosion allowing longer, smoother operation</li> </ul>

<ul> <li>Meets the following standards: API SL/SH/SG and JASO MA</li> <li>Recommended for all 4-stroke motorcycles with catalytic converters</li> <li>Ester technology improves engine response</li> <li>Proprietary extreme pressure formula to protect the gearbox</li> <li>Low sulfur and phosphorus formula for bikes fitted with catalytic converters</li> </ul>

<ul> <li>MOS2 (Teflon/Molybdenum) Coated Skirts - A rolled on application process provides a bond that is 10 times stronger than other spray on coatings.</li> <li>Benefits include increased heat transfer, reduced friction and helping to eliminate cold seizures</li> <li>Machined Smooth Heads - Reflects combustion heat and reduces carbon buildup, protecting the top of the piston.</li> <li>Some tests have shown this feature can increase horsepower and fuel economy by up to 6%</li> <li>Anodized Domes - I</li> </ul>

<ul> <li>Mustangs advanced comfort technology has been incorporated into this totally new style of custom seat.</li> <li>Now you can ride low and look cool and still be comfortable at the end of the days ride.</li> <li>Detailed stitch work in the highly durable, synthetic glove-leather cover</li> <li>Made in the USA</li> <li>Front Width: 12in.</li> </ul>

<ul> <li>Namura offers high performance gaskets for the professional motorsports market.</li> <li>These gaskets are made with imported Australian Klingersil and other high tech materials.</li> <li>They provide greater reliability and high performance for todays hard working motor.</li> <li>These materials are excellent for use on highpressure applications and have outstanding stress relaxation and resistance.</li> <li>These include gaskets for the head, base and upper end.</li> </ul>

<ul> <li>Needle Jets by Mikuni</li> </ul>

<ul> <li>Needle jets by Mikuni</li> <li>Made in Japan</li> <li>Round Slide</li> </ul>

<ul> <li>Newest API rating of SL for catalytic converters</li> <li>Meets the following standards: API SL/SH/SG and JASO MA</li> <li>Recommended for all 4-stroke engines</li> <li>Ester technology to improve engine response</li> <li>Proprietary extreme pressure formula to protect the gearbox</li> </ul>

<ul> <li>No-frills, Vintage look</li> <li>Braided edge skirt</li> <li>Thin Rear seat width: 8in.</li> <li>Made in USA</li> <li>Rear Width: 6in.</li> </ul>

<ul> <li>Once its installed, you wont be able to tell its a replacement</li> <li>Fabricated using the original manufacturers build process for a strong bracket that fits exactly like OEM</li> <li>Match the OEM bracket in dimensions, tolerances and other specifications</li> <li>Accept all stock equipmentgauges, mirrors, headlights, etc.</li> </ul>

<ul> <li>Passenger seat extends forward to provide ample back support for the driver</li> <li>All styles are finished with braided edge trim</li> <li>Front Width: 16in.</li> <li>Rear Width: 12.5in.</li> </ul>

<ul> <li>Passenger seat extends forward to provide ample back support for the driver</li> <li>All styles are finished with braided edge trim</li> <li>Front Width: 16in.</li> <li>Rear Width: 13in.</li> </ul>

<ul> <li>Protect your trike from dust and spills when garaged</li> <li>Made from a breathable, soft, non-scratch brushed poly/cotton</li> <li>For indoor use only</li> <li>Two sizes available to fit most models</li> </ul>

<ul> <li>Quantum hardcoated Lexan polycarbonate</li> <li>Available in low and full versions</li> <li>Full version available with or without Wash N Wipe</li> <li>Wash N Wipe has a rolled top edge to prevent wiper water from entering the cab</li> <li>Wiper operates at 33 cycles per minute, Silicone wiper blade</li> </ul>

<ul> <li>QuickSet design allows removal in under five seconds without tools!</li> <li>Minimal docking hardware - almost invisible when backrest is removed</li> <li>Key lockable design for maximum security</li> <li>Chromed steel sideplates, uprights and luggage rack with stainless steel working parts</li> <li>NOTE: QuickSet Mount System required to mount backrest or luggage rack.</li> </ul>

<ul> <li>Replacement Drive Bolt for PBR Chain Breaker</li> </ul>

<ul> <li>Seat design lets you ride low and still be comfortable</li> <li>Detailed stitch work in the highly durable, synthetic glove leather cover</li> <li>Made in the USA</li> <li>Rear Width: 7in.</li> </ul>

<ul> <li>Slim profile with aggressive styling</li> <li>Abbreviated contours look great on performance cruisers and street rods</li> <li>An ideal choice as your daily rider in warm weather</li> </ul>

<ul> <li>Slow Jets by Mikuni</li> <li>Also applies to some smooth bores</li> </ul>

<ul> <li>Sold each, unless noted</li> <li>Made in the USA</li> </ul>

<ul> <li>Specially designed to handle the extreme pressures and high temperatures of todays sport bikes and touring machines</li> <li>Reduces clutch drag and allows gears to mesh smoothly and positively</li> </ul>

<ul> <li>Split foam construction on a single steel base plate</li> <li>Well-padded and features a leather-like expanded vinyl covering</li> <li>Designed to keep driver from sliding forward</li> <li>Made in the USA</li> <li>Front Width: 11.5in.</li> </ul>