ClassificationId: ['317970011']
Products with this attribute (115 total)
1100600100781
11100-0100
4.5 oz Nomex FR Coverall
6152-0375
<ul> <li>Item Type: Absorbent Roll</li> <li>Brand: NEW PIG</li> <li>Manufacturer Part Number: MAT630</li> <li>Made in the United States</li> </ul>
Air Sampling and Gas Analysis Accessories. Product Type Calibration Gases, Brand Davis. Bacharach 0051-1994 Calibrati...
ASTM COLOR STDS 1/PK
B1206
BLUDOCK
Buffer Ph4.0 Colrls 500ml
Emd Hx0200-3
General Accessories. Product Type Chart Recorder Paper, Brand Newport. Accessory Newport Am/Pm F Double Sided.
Iron Test Colorimetric 3 to 500mg/L
Just a moment...
L-Carnitine Hydrochloride Synthetic
Mce .45um Bk Pl 47mm
Mce .65um Wh Pl 25mm
Mce 0.05um Wh Pl 90mm
Mce 1.2um Wh Gd 25mm
Meat Extract for Microbiology 100 G
MIL-NY1002500
MIL-NY2H04700
MIL-SX0001301
MIL-VCTP01300
MIL-XX4504713
MIL-XX6700059
MIL-XX67000PK
MIL-XX8023EL0
MIL-YT30142HW
MILLIPORE RAWG0250C
Millipore Sigma
Millipore Sigma
Millipore's 37mm Aerosol Analysis Monitors are transparent, disposable, plastic filter holders pre-assembled with Type MF (mixed cellulose esters) Millipore filters. A thin cellulose support seals the filter between monitor sections to distribute sample flow evenly over the filter surface. A three-part design holds the filter in-place when the top section is removed for open aerosol sampling. Applications: aerosol analysis monitors are available with 0.45?m and 0.8?m cellulose esters membranes. Matched weight monitors contain two filters matched in weight to within 0.1 mg, eliminating test filter pre-weighing in gravimetric analysis. Pore Size (?m): 0.8. Filter Diameter, mm: 37. Filter Code: AAWP. Filter Color: White. Filter Surface: Plain. Sterility: Non-Sterile. Filtration Area, cm squared: 9. Pressure/Vacuum: Vacuum. Device Material: Polystyrene.
Millipore's 37mm Aerosol Analysis Monitors are transparent, disposable, plastic filter holders pre-assembled with Type MF (mixed cellulose esters) Millipore filters. A thin cellulose support seals the filter between monitor sections to distribute sample flow evenly over the filter surface. Applications aerosol analysis monitors are available with 0.45?m and 0.8?m cellulose esters membranes. Matched weight monitors contain two filters matched in weight to within 0.1 mg, eliminating test filter pre-weighing in gravimetric analysis. Pore size (?m): 0.45. Materials of construction: polystyrene. Filter diameter: 37mm. Filter code: HAWP. Filter color: white. Filter surface: plain. Sterility: non-sterile. Filtration area, cm squared: 9. Pressure/vacuum: vacuum. Device material: polystyrene.
Misc - CI-300-CA-OP - Steam Punk Solid Open Metal Paper Weight - 300 grams Copper - Sharp Things OKC
MISUMI USA: Industrial Configurable Components Supply
MMJ Labs Ice Wings - Universal Healthcare Buzzy Soft Ice Wings, Dispos ? Grayline Medical
Molecular Bioproducts
Molecular Bioproducts
Molecular Bioproducts
Motion Industries
MP BIOMEDICAL SDS Easy SOL 20, Analytical Reagents - 6LTX2|11SDS20002 - Grainger
MTC Bio 50ml Reservoir, Non-Sterile, Bulk Pack P8050. ✅MTC Bio authorized distributor ✅. ☎ (800) 884-5767 Mon-Fri 8:00 AM - 5:00 PM ET or order online 24/7
MTC Bio 50ml Reservoir, Sterile, 5/Sterile Bag P8050-5S. ✅MTC Bio authorized distributor ✅. ☎ (800) 884-5767 Mon-Fri 8:00 AM - 5:00 PM ET or order online 24/7
MYRON L Conductivity Calibration Solutions. Standards have NaCl and 442T conversions included for ease of use. Conduc...
MYRON L Conductivity Calibration Solutions. Standards have NaCl and 442 conversions included for ease of use. Conduc...
MYRON L Conductivity Calibration Solutions. Standards have NaCl and 442 conversions included for ease of use. Conduc...
Nalgene
Nalgene
Nalgene
Nalgene
Nalgene
Nalgene
Nalgene
Nalgene
Nalgene
Nalgene
Nalgene
Nalgene
Nalgene
Nalgene
Nalgene 2000 mL 64 oz. Utility Box, 7-1
Nalgene 500 mL Squibb Separatory Funnel,
Nalgene Cylindrical Tanks with Spigot, LLDPE, 54102 54102-0005 |
Nalgene LLDPE Tanks with Covers 11100-0005 |
Neese
Neese
Neese
Neese
Neese
Newport Electronics Test, Recorder - CT485-CMF/N
Newport LIP275-1222-01 Balance Isolation Platform, 12" W x 22" D from Cole-Parmer
NSPT524WWW/0
Nylon filters are compatible with a broad range of solvents. Two types are available: membrane filters with pore sizes ranging from 0.20 to 1.2?m and woven net filters (NY11) with mesh openings ranging from 10 to 180?m. Filter material: Nylon. Maximum operating temperature degree C: 100. Filter type: net filter. Pore size (?m): 11. Filter diameter: 90mm. Filter code: NY11. Filter color: white. Filter surface: plain. Porosity %: 6.
Nylon filters are compatible with a broad range of solvents. Two types are available: membrane filters with pore sizes ranging from 0.20 to 1.2?m and woven net filters (NY1H) with mesh openings ranging from 10 to 180?m. Filter material: Nylon. Maximum operating temperature degree C: 100. Filter type: net filter. Pore size (?m): 100. Filter diameter: 47mm. Filter code: NY1H. Filter color: white. Filter surface: plain. Porosity %: 44.
Nylon filters are compatible with a broad range of solvents. Two types are available: membrane filters with pore sizes ranging from 0.20 to 1.2?m and woven net filters (NY2H) with mesh openings ranging from 10 to 180?m. Filter material: Nylon. Maximum operating temperature degree C: 100. Filter type: net filter. Pore size (?m): 120. Filter diameter: 25mm. Filter code: NY2H. Filter color: white. Filter surface: plain. Porosity %: 49.
Nylon filters are compatible with a broad range of solvents. Two types are available: membrane filters with pore sizes ranging from 0.20 to 1.2?m and woven net filters (NY2H) with mesh openings ranging from 10 to 180?m. Filter material: Nylon. Maximum operating temperature degree C: 100. Filter type: net filter. Pore size (?m): 120. Filter diameter: 90mm. Filter code: NY2H. Filter color: white. Filter surface: plain. Porosity %: 49.
Nylon filters are compatible with a broad range of solvents. Two types are available: membrane filters with pore sizes ranging from 0.20 to 1.2?m and woven net filters (NY4H) with mesh openings ranging from 10 to 180?m. Filter material: Nylon. Maximum operating temperature degree C: 100. Filter type: net filter. Pore size (?m): 140. Filter diameter: 47mm. Filter code: NY4H. Filter color: white. Filter surface: plain. Porosity %: 43.
Nylon filters are compatible with a broad range of solvents. Two types are available: membrane filters with pore sizes ranging from 0.20 to 1.2?m and woven net filters (NY60) with mesh openings ranging from 10 to 180?m. Filter material: Nylon. Maximum operating temperature degree C: 100. Filter type: net filter. Pore size (?m): 60. Filter diameter: 90mm. Filter code: NY60. Filter color: white. Filter surface: plain. Porosity %: 41.
Nylon filters are compatible with a broad range of solvents. Two types are available: membrane filters with pore sizes ranging from 0.20 to 1.2?m and woven net filters (NY60) with mesh openings ranging from 10 to 180?m. Filter material: Nylon. Maximum operating temperature degree C: 100. Filter type: net filter. Pore size (?m): 60. Filter dimensions: 30cm x 300cm. Filter diameter: 30cm x 3m. Filter code: NY60. Filter color: white. Filter surface: plain. Porosity %: 41.
Nylon filters are compatible with a broad range of solvents. Two types are available: membrane filters with pore sizes ranging from 0.20 to 1.2?m and woven net filters (NY6H) with mesh openings ranging from 10 to 180?m. Filter material: Nylon. Maximum operating temperature degree C: 100. Filter type: net filter. Pore size (?m): 160. Filter diameter: 90mm. Filter code: NY6H. Filter color: white. Filter surface: plain. Porosity %: 52.
Nylon filters are compatible with a broad range of solvents. Two types are available: membrane filters with pore sizes ranging from 0.20 to 1.2?m and woven net filters (NY8H) with mesh openings ranging from 10 to 180?m. Filter material: Nylon. Maximum operating temperature degree C: 100. Filter type: net filter. Pore size (?m): 180. Filter diameter: 90mm. Filter code: NY8H. Filter color: white. Filter surface: plain. Porosity %: 47.
Oakton Conductivity and TDS Standard, 44
Oakton WD-08519-54 Self-Adhesive Surface Thermocouple Probe, Type T, 2" x1 " Probe Surface, 5' Wire. No nylon handle ...
OAKTON WD-35805-14 Submersible Single-Junction ORP Electrode, 0.5 x 5.1"
OC White 13391 Ultraviolet 15 Watt Bulbs
Order B1212 by MTC Bio Western Blotting Boxes, 85 x 85 x 30mm - US Mega Store
Progard T3 Cartridge
PTFE Locking Ring Gasket for No. 8 Stopper. Brand: Millipore.
Pvc Gloves, Power Free, Large, White, 10
Refrigerator, Pass Thru, 25 CF, Solid Door
SILICONE O-RING 2-251 142MM 4/PK
STB-18 | Hanging General-purpose Container STB-18 (4 L) - 33 (25 L) | Nitto Kinzoku Kogyo | MISUMI
STB-21 | Hanging General-purpose Container STB-18 (4 L) - 33 (25 L) | Nitto Kinzoku Kogyo | MISUMI
STB-30 | Hanging General-purpose Container STB-18 (4 L) - 33 (25 L) | Nitto Kinzoku Kogyo | MISUMI
The Isopore membrane is a polycarbonate, track-etched screen filter recommended for all analyses in which the sample is viewed on the surface of the membrane. Isopore membrane offers distinct advantages for the analysis of airborne contaminants and other particles using optical or electron microscopy. The Isopore membrane is composed of polycarbonate film, which has a smooth, glass-like surface for clearer sample observation. The unique manufacturing process of the membrane ensures a precise pore diameter and a consistent pore size for accurate separation of samples by size. Isopore membranes do not stain resulting in low background interference. Clearing is not necessary for most transmitted light microscopy. Matched-weight filters are not usually required because of low, constant tar and ash weights. Isopore membranes are non-hygroscopic, which permits rapid drying and reduced sample analysis time. Filter material: Polycarbonate. Media brand name: Isopore. Refractive Index: 1.6. Bubble point at 23 degree C: >= 1.33 bar, air with water. Filter type: screen filter. Pore size (?m): 0.6. Filter Diameter, mm: 13. Filter code: DTTP. Filtration device and accessory type: Filter Discs/Sheets. Filter color: White. Thickness(?m): 28.
The Isopore membrane is a polycarbonate, track-etched screen filter recommended for all analyses in which the sample is viewed on the surface of the membrane. Isopore membrane offers distinct advantages for the analysis of airborne contaminants and other particles using optical or electron microscopy. The Isopore membrane is composed of polycarbonate film, which has a smooth, glass-like surface for clearer sample observation. The unique manufacturing process of the membrane ensures a precise pore diameter and a consistent pore size for accurate separation of samples by size. Isopore membranes do not stain resulting in low background interference. Clearing is not necessary for most transmitted light microscopy. Matched-weight filters are not usually required because of low, constant tar and ash weights. Isopore membranes are non-hygroscopic, which permits rapid drying and reduced sample analysis time. Isopore trade. Filter Material: Polycarbonate. Media brand name: Isopore. Refractive index: 1.6. Bubble point at 23 degree C: >=3.5 bar, air with water. Filter type: Screen filter. Pore Size (?m): 0.22. Filter Diameter,mm: 47. Water Flow Rate, mL/min x cm squared/psi: 6. Filter Code: GTBP. Filtration device and accessory type: Filter Discs/Sheets.
The Isopore membrane is a polycarbonate, track-etched screen filter recommended for all analyses in which the sample is viewed on the surface of the membrane. Isopore membrane offers distinct advantages for the analysis of airborne contaminants and other particles using optical or electron microscopy. The Isopore membrane is composed of polycarbonate film, which has a smooth, glass-like surface for clearer sample observation. The unique manufacturing process of the membrane ensures a precise pore diameter and a consistent pore size for accurate separation of samples by size. Isopore membranes do not stain resulting in low background interference. Clearing is not necessary for most transmitted light microscopy. Matched-weight filters are not usually required because of low, constant tar and ash weights. Isopore membranes are non-hygroscopic, which permits rapid drying and reduced sample analysis time. Trade Name: Isopore. Filter Material: Polycarbonate. Media Brand Name: Isopore. Refractive Index: 1.6. Bubble Point at 23 degree C: >=0.43 bar, air with water. Filter Type: Screen filter. Pore Size (?m): 3. Filter Diameter, mm: 13. Air Flow Rate, L/min x cm squared/psi: 0.868.Water Flow Rate (mL/min/cm squared): 3628. Filtration Device and Accessory Type: Filter Discs/Sheets. Thickness, ?m: 15-20.Porosity %: 11.3.
The Isopore membrane is a polycarbonate, track-etched screen filter recommended for all analyses in which the sample is viewed on the surface of the membrane. Isopore membrane offers distinct advantages for the analysis of airborne contaminants and other particles using optical or electron microscopy. The Isopore membrane is composed of polycarbonate film, which has a smooth, glass-like surface for clearer sample observation. The unique manufacturing process of the membrane ensures a precise pore diameter and a consistent pore size for accurate separation of samples by size. Isopore membranes do not stain resulting in low background interference. Clearing is not necessary for most transmitted light microscopy. Matched-weight filters are not usually required because of low, constant tar and ash weights. Isopore membranes are non-hygroscopic, which permits rapid drying and reduced sample analysis time. Trade Name: Isopore. Filter Material: Polycarbonate. Media Brand Name: Isopore. Refractive Index: 1.6. Bubble Point at 23 degree C: >=0.6 bar, air with water. Filter Type: Screen filter. Filter Diameter, mm: 37. Filtration Device and Accessory Type: Filter Discs/Sheets.
The Isopore membrane is a polycarbonate, track-etched screen filter recommended for all analyses in which the sample is viewed on the surface of the membrane. Isopore membrane offers distinct advantages for the analysis of airborne contaminants and other particles using optical or electron microscopy. The Isopore membrane is composed of polycarbonate film, which has a smooth, glass-like surface for clearer sample observation. The unique manufacturing process of the membrane ensures a precise pore diameter and a consistent pore size for accurate separation of samples by size. Isopore membranes do not stain resulting in low background interference. Clearing is not necessary for most transmitted light microscopy. Matched-weight filters are not usually required because of low, constant tar and ash weights. Isopore membranes are non-hygroscopic, which permits rapid drying and reduced sample analysis time. Trade Name: Isopore. Filter Material: Polycarbonate. Media Brand Name: Isopore. Refractive Index: 1.6. Bubble Point at 23 degree C: >=0.6 bar, air with water. Filter Type: Screen filter. Filter Diameter, mm: 47. Filtration Device and Accessory Type: Filter Discs/Sheets.
First
Previous
1
2
Next
Last