Miles 80W90 Gear Oils are premium quality gear and transmission oils blended from highly refined high Viscosity Index base stocks. Premium quality Miles Multi-Spec Gear Lubricants, through the combination of highly refined base oils and up-to-date additive technology, are more economical than oils of lesser quality and lower initial cost. Equipment life may be longer and more trouble free, and maintenance cost and downtime may be significantly reduced through the use of Miles Multi-Spec Gear Lubricants in concert with a dedicated preventive maintenance program. Recommendations Miles MULTI-SPEC Gear Lubricants may be recommended for the following applications: When API MT-1 gear oils are required. When API GL-5, GL-4 or GL-3 gear oils are required.When MIL-L-2105D or MIL-L-2105C or proposed MIL-L-2105E gear oils are required. When extreme pressure (EP) gear oils are required. When Mack GO-G and GO-H gear oils are required. In all heavy duty truck differentials. In all domestic automobile differentials and some manually shifted transmissions. In heavy duty manually shifted truck transmissions, such as Eaton, requiring API MT-1 performance. In oil lubricated wheel bearings.SELECTION Miles MULTI-SPEC Gear Lubricants are available in 2 multi-viscosity grades to comply with most automotive and truck applications. Listed below are the physical and chemical characteristics of Miles MULTI-SPEC Gear Lubricants. Equipment manufacturer recommendations and conventional guides to lubricant selection should be followed to determine the best MULTI-SPEC Gear Lubricant grade for a specific application. TYPICAL PROPERTIES: SAE GRADE: 80W-90, Gravity, API 28.0, Viscosity:SUS @ 210? F 77, cSt @ 100? C 14.0, Cp @ C 120,000(-26), Index 95, Pour Point, C(F) -30(-20), Channel Point, C(F) -36(-35)
Miles All Spec 10W Miles Monograde Heavy Duty Xhd Diesel Engine Oils are high quality low ash engine oils formulated for diesel engines where ash deposits are a problem. The low ash content reduces ash deposits and helps keep intakes clear. Miles Monograde Heavy Duty Xhd Diesel Engine Oils are Api licensed and exceed Api Cf-2 and Cf requirements. They are recommended for applications requiring Mil-L-2104E and former Api categories Ce, Cd-II and Cd. Advantage Monogrades 30 and 40 also meet the requirements of former Api category SJ, and 10 meets Allison C-4 and Cat To-2. TYPICAL PROPERTIES: CCS, cP( @ -20?C) 1600,Viscosity, cSt @ 100?C 6.4, Viscosity, cSt @ 40?C 36.5, Viscosity Index 125, Pour Point, ?F -33, Sulfated Ash, Wt. (%) 0.78, Total Base No., (D2896) 7. PERFORMANCE: API CE, CD-II, CD X, API CF2, SJ - API CF X
Miles biosyn FR is formulated to offer superior fire resistance and enhanced lubrication and protection. Unlike most water soluble glycol based formulations, Miles biosyn FR is far easier to maintain, has an exceptionally long fluid life, and, offers superior pump protection. It is non-toxic and non-hazardous, and its exceptional oxidative stability, corrosion resistance, and anti-wear properties make it particularly well suited for applications where other fire resistant fluid technologies are restricted. Attributes: very high Flash point superior pump protection excellent protection against wear, rust and corrosion excellent demulsibility excellent oxidative stability high viscosity Index non-toxic/non-hazardous lubrication properties biosyn FR- viscosity Index 114 viscosity cSt @ 40 OC (D445) 100.0 viscosity cSt @ 100 OC (D445) 12.2 Flash point of (D92) 508 auto ignition point of 758 pour point of (D97) -39 four ball, 40 kg, 1200 RPM, 167oF 1 hr., scar DIA mm .40 copper corrosion (D130) 1a rust Test (D665) pass pump wear Test (Vickers mg) 15 Denison meets demulsibility, 130 of, 30 min 40/38/2.
Miles biosyn FR is formulated to offer superior fire resistance and enhanced lubrication and protection. Unlike most water soluble glycol based formulations, Miles biosyn FR is far easier to maintain, has an exceptionally long fluid life, and, offers superior pump protection. It is non-toxic and non-hazardous, and its exceptional oxidative stability, corrosion resistance, and anti-wear properties make it particularly well suited for applications where other fire resistant fluid technologies are restricted. Attributes: very high Flash point superior pump protection excellent protection against wear, rust and corrosion excellent demulsibility excellent oxidative stability high viscosity Index non-toxic/non-hazardous lubrication properties biosyn FR- viscosity Index 123 viscosity cSt @ 40 OC (D445) 49.8 viscosity cSt @ 100 OC (D445) 7.8 Flash point of (D92) 479 auto ignition point of 755 pour point of (D97) -45 four ball, 40 kg, 1200 RPM, 167oF 1 hr., scar DIA mm .40 copper corrosion (D130) 1a rust Test (D665) pass pump wear Test (Vickers mg) 15 Denison meets demulsibility, 130 of, 30 min 40/38/2.
Miles Dexron III is a premium quality, multi-purpose automatic transmission fluid specially formulated for new generation, electronically controlled transmissions. This fluid may also be used in previous transmissions built by General Motors, Chrysler, Ford (except where type ?F? is required) and most foreign manufacturers. MILES DEXRON? III / MERCON? FLUID meets and exceeds the requirements of DEXRON? IIE, DEXRON?II,DEXRON?,DEXRON?/MERCON?and TYPE A suffix transmission fluids. This fluid is also formulated to exceed the performance requirements of Allison Transmission Division C-4, and various hydraulic manufactures? antiwear hydraulic fluid specifications. MILES DEXRON? III / MERCON? FLUID is recommended for the following applications: ? Where DEXRON? III, DEXRON? IIE, DEXRON? II, DEXRON? or TYPE A fluid is required ? Where MERCON?, M2C138-CJ OR M2C166-H Fluids are required ? For all automatic transmissions built by GM and Chrysler ? For all 1979 or newer transmissions built by Ford (except Ford FMX and pre-1080 C-4 transmissions) ? For automatic transmissions in imported cars and trucks built by Audi, BMW, Fiat, Honda, Hyundai, Isuzu Mercedes-Benz, Mitsubishi, Nissan, Porsche, Saab, Subaru, Toyota, Volkswagen and Volvo ? For service where Allison C-4 Fluids are recommended ? For use in hydraulic and compressor systems where superior low temperature flow ability is required ? For use in torque converters, power shift transmissions, hydrostatic transmissions, Caterpillar TO-2, Hagglunds-Dennison HFO, Vickers, and Sundstrom pump service ? For service where Chrysler fluid M7716 is required.Miles automatic transmission fluid, DEXRON? III / MERCON?, has been formulated specifically to meet a wide range of automatic transmission requirements. It can virtually service all of your transmission needs. PROPERTIES: MILES DEXRON@ III / MERCON@ FLUID Gravity, API @ 60 ?F 31.4, Viscosity Index 190, Viscosity @ 40 ?C 36.5 cst, Viscosity @ 100 ?C 7.8 cst, Flash, ?C 177, Pour Point, ?C -40, Brookfield @ -40 ?C 17,500 cp, TAN 1.2
Miles Estech Gas Comp ISO 100 is an ester-based lubricant specifically formulated for gas compressors. Miles Estech Gas Comp's superior carbon and varnish control make it the ideal lubricant for dirty-gas applications. It offers outstanding oxidative and thermal stability as well as excellent wear, rust and corrosion protection.Protects against wear, rust and corrosion ?Saves energy?High flash point?Non-toxic/non-hazardou.Typical properties: ISO Grade 100; Viscosity cSt @ 40?C 102,Viscosity cSt @ 100?C 11.3,Viscosity Index 97,Flash Point ?F (?C) 488 (253),Pour Point ?F (?C) -35(-37),Copper Corrosion, 24 Hr 1a,Rust Test Distilled Water Pass,Sea Water Pass,Demulsibility,130?F, 30 Min 40/38/2.
Miles Estech Gas Comp ISO 150 is an ester-based lubricant specifically formulated for gas compressors. Miles Estech Gas Comp's superior carbon and varnish control make it the ideal lubricant for dirty-gas applications. It offers outstanding oxidative and thermal stability as well as excellent wear, rust and corrosion protection.Protects against wear, rust and corrosion ?Saves energy?High flash point?Non-toxic/non-hazardou.TYPICAL PROPERTIES: ISO Grade 150; Viscosity cSt @ 40?C 140, Viscosity cSt @ 100?C 8.5, Viscosity Index 96, Flash Point ?F (?C) 475 (246), Pour Point ?F (?C) -36(-38), Copper Corrosion, 24 Hr 1a, Rust Test Distilled Water Pass, Sea Water Pass, Demulsibility, 130?F, 30 Min 40/38/2
Miles Fg Comp Oil ISO 32 synthetic food-grade compressor lubricant contains high-performance fluids and is designed for extended drain intervals. This lubricant meets H1 requirements for lubricants with incidental food contact, Fda 21 Cfr 178.3570. Protects against rust and corrosion, Controls carbon and varnish formation, Protects against wear, Low volatility, Excellent film strength, High flash point, Non-toxic/non-hazardous. TYPICAL PROPERTIES: ISO Grade 32; NSF H1 Registration Number 152886, Viscosity cSt @ 40?C 34, Viscosity cSt @ 100?C 6.1, Viscosity Index 127, Flash Point ?F (?C) 430 (221), Pour Point ?F (?C) -45 (-43), Copper Corrosion, 24 Hr 1a, Demulsibility, 130?F, 30 Min 40/40/0
Miles Fg Comtech Clean ISO 32 food grade fluids are formulated to serve the dual purpose of air compressor lubricant and cleaner.ntended for use in varnished and carboned screw compressors, Series MILES FG COMTECH CLEAN fluids are formulated to clean without the inconveniences typical of more aggressive cleaners. They are designed to minimize filter/separator blockage and not disrupt normal operations. Use of Series Miles Fg Comtech Clean fluids eliminates the need for production shifts to take compressors out of service for cleaning as well as the need to continuously change filters and separators. TYPICAL PROPERTIES: ISO Grade 32; NSF H1 Registration Number 136288, Viscosity cSt @ 0oC 299, Viscosity cSt @ 40oC 34, Viscosity cSt @ 80oC 9.0, Viscosity cSt @ 90oC 7.0, Viscosity cSt @ 100oC 6.1, Flash Point oF 430, Auto-Ignition Point oF 680, Pour Point oF -45, Four Ball, 40 Kg, 1200 RPM, 167oF, 1 hr, Scar Dia mm .40, Four Ball Weld Point, Kg 100, Copper Corrosion, 24 Hr 1a, Demulsibility, 130oF, 30 Min 40/40/0
Miles Fg Comtech Clean ISO 68 food grade fluids are formulated to serve the dual purpose of air compressor lubricant and cleaner.ntended for use in varnished and carboned screw compressors, Series Miles Fg Comtech Clean fluids are formulated to clean without the inconveniences typical of more aggressive cleaners. They are designed to minimize filter/separator blockage and not disrupt normal operations. Use of Series Miles Fg Comtech Clean fluids eliminates the need for production shifts to take compressors out of service for cleaning as well as the need to continuously change filters and separators. TYPICAL PROPERTIES: ISO Grade 68; NSF H1 Registration Number 136290, Viscosity cSt @ 0oC 802, Viscosity cSt @ 40oC 66, Viscosity cSt @ 80oC 15.6, Viscosity cSt @ 90oC 12.0, Viscosity cSt @ 100oC 9.4, Flash Point oF 465, Auto-Ignition Point oF 715, Pour Point oF -32, Four Ball, 40 Kg, 1200 RPM, 167oF, 1 hr, Scar Dia mm .40, Four Ball Weld Point, Kg 100, Copper Corrosion, 24 Hr 1a, Demulsibility, 130oF, 30 Min 40/40/0
Miles Hisyn Turbo ISO 46 - is formulated to provide superior service and very long life In all types of gas turbines. It has excellent oxidation resistance, unsurpassed thermal stability, and excellent carbon and varnish control. Series Miles Hisyn Turbo meets all stationary turbine manufacturers specifications and is recommended for all applications, even those where bearing temperatures are well in excess of 500?F.Series Miles Hisyn Turbo advanced proprietary formulation provides superior protection and performance ?even in severe operating environments.Typical properties: ISO Grade 46; Viscosity Index 127,Viscosity cSt @ 40?C 46.5,Viscosity cSt @ 100?C 7.5,Flash Point ?F 448 Pour Point ?F-45,Four Ball, 40 Kg,1200 RPM, 167?F, 1 Hr, Scar Dia mm.39,Rust Test PASS,Copper Corrosion, 24 Hr 1a,Demulsibility, 130?F, 30 Min 40/40/0
Miles Hydro - Syn ISO 46 thetic Series is utilizes advanced synthetic base fluids and additives to provide biodegradability without sacrificing performance. This advanced technology formulation has a long fluid life even in severe operating conditions, and offers excellent resistance against wear, corrosion and carbon deposits. TYPICAL PROPERTIES: Grade 46, Viscosity cSt @ 40?C 45.1, Oxidation Stability 10000+, Color (D1500) <.5, Flash Point ?F 435, Pour Point ?F -40, Copper Corrosion 1a, Rust Test Pass, Foam Sequence 1 0/0, Pump Wear Test Vickers (I-286-S, M2950-S, 35VQ25) Pass, Racine Meets, Cinncinati Milacron Meets DenISOn (HF-0, HF-2) Demulsibility, 130?F, 30 Min Meets 40/40/0
Miles Hydro - Syn ISO 46 thetic Series is utilizes advanced synthetic base fluids and additives to provide biodegradability without sacrificing performance. This advanced technology formulation has a long fluid life even in severe operating conditions, and offers excellent resistance against wear, corrosion and carbon deposits. TYPICAL PROPERTIES: Grade 46, Viscosity cSt @ 40?C 45.1, Oxidation Stability 10000+, Color (D1500) <.5, Flash Point ?F 435, Pour Point ?F -40, Copper Corrosion 1a, Rust Test Pass, Foam Sequence 1 0/0, Pump Wear Test Vickers (I-286-S, M2950-S, 35VQ25) Pass, Racine Meets, Cinncinati Milacron Meets DenISOn (HF-0, HF-2) Demulsibility, 130?F, 30 Min Meets 40/40/0
Miles Hytex ISO 100 Aw Oils are high performance, anti-wear hydraulic oils designed for heavy-duty hydraulic systems operating over a wide range of temperatures. They produce excellent results in a wide variety of high pressure hydraulic systems found on industrial machinery, ships, woodlands and mining operations, and other mobile equipment. Miles HYTEX AW Oils are an exclusive blend of exceptionally pure Hydro Treated base oils (Hydrocracking), and specially selected additives that deliver outstanding performance and extended service life. Compared to conventional hydraulic oils, Miles HYTEX AW Oils offer: ?Outstanding, long term resistance to breakdown caused by air and high temperatures ?Improved anti-wear protection ?superior rust and corrosion prevention. Outstanding oxidation and thermal stability ?Longer life, which extends the time between oil changes?Elimination of harmful sludge and varnish deposits ensures continued smooth, reliable operation of hydraulic valves and actuators?Reduces operating and maintenance costs?Superior anti-wear protection ?Improves equipment reliability in all types of piston, gear and vane hydraulic pumps operating over a wide range of pressures ?Superior rust and corrosion protection ?Iron and metal components protected against water damage?Reduces maintenance costsExcellent water separability and hydrolytic stability ?Reusable after water is removed because HYTEX Oils separate readily from water without loss of performance additives?Reduces operating and maintenance cost. Improved foam and air entrainment performance ?Prevents overflowing of reservoirs?Eliminates ?sponginess? from hydraulic system operations, and damage due to pump cavitation?Improves equipment reliability. APPLICATIONSMiles HYTEX AW Oils are recommended for heavy duty high pressure hydraulic systems operating over a wide range of temperatures. They may be used in systems equipped with fine filters without loss of additives or causing filter plugging. Because of their long life, rust and foam inhibiting features, HYTEX AW Oilsmay be used to lubricate anti-friction bearings and gears found in circulation, splash, bath and ring-oiled systems. HYTEX Oils are approved against the following hydraulic pump manufacturers? specifications: nISOn HF-0 Vickers 35VQ25 Cincinnati-Milacron P-68, P-69, P-70 HYTEX Oils are recommended for piston, gear and vane pumps, including those manufactured by: Vickers, Hagglunds-DenISOn, Cincinnati-Milacron, Sundstrand, Rexroth-Mannesman, Racine, Oilgear, Hydreco and Dynex.
Miles Hytex ISO 32 Aw Oils are high performance, anti-wear hydraulic oils designed for heavy-duty hydraulic systems operating over a wide range of temperatures. They produce excellent results in a wide variety of high pressure hydraulic systems found on industrial machinery, ships, woodlands and mining operations, and other mobile equipment. Miles HYTEX AW Oils are an exclusive blend of exceptionally pure Hydro Treated base oils (Hydrocracking), and specially selected additives that deliver outstanding performance and extended service life. Compared to conventional hydraulic oils, Miles HYTEX AW Oils offer: ?Outstanding, long term resistance to breakdown caused by air and high temperatures ?Improved anti-wear protection ?superior rust and corrosion prevention. Outstanding oxidation and thermal stability ?Longer life, which extends the time between oil changes?Elimination of harmful sludge and varnish deposits ensures continued smooth, reliable operation of hydraulic valves and actuators?Reduces operating and maintenance costs?Superior anti-wear protection ?Improves equipment reliability in all types of piston, gear and vane hydraulic pumps operating over a wide range of pressures ?Superior rust and corrosion protection ?Iron and metal components protected against water damage?Reduces maintenance costsExcellent water separability and hydrolytic stability ?Reusable after water is removed because HYTEX Oils separate readily from water without loss of performance additives?Reduces operating and maintenanc e cost. Improved foam and air entrainment performance ?Prevents overflowing of reservoirs?Eliminates ?sponginess? from hydraulic system operations, and damage due to pump cavitation?Improves equipment reliability. APPLICATIONSMiles HYTEX AW Oils are recommended for heavy duty high pressure hydraulic systems operating over a wide range of temperatures. They may be used in systems equipped with fine filters without loss of additives or causing filter plugging. Because of their long life, rust and foam inhibiting features, HYTEX AW Oilsmay be used to lubricate anti-friction bearings and gears found in circulation, splash, bath and ring-oiled systems. HYTEX Oils are approved against the following hydraulic pump manufacturers? specifications: nISOn HF-0 Vickers 35VQ25 Cincinnati-Milacron P-68, P-69, P-70 HYTEX Oils are recommended for piston, gear and vane pumps, including those manufactured by: Vickers, Hagglunds-DenISOn, Cincinnati-Milacron, Sundstrand, Rexroth-Mannesman, Racine, Oilgear, Hydreco and Dynex. TYPICAL PROPERTIES: HYTEX Grade 19, ISO Grade 32, Operating Temp Range, ?F 12.2 - 145.4, Viscosity cSt at 40 ?C = Sus / 100 F D445 32.0 150, Viscosity Index D2270 99, Flash Point, ?F D92 429.8, Pour Point, ?F D97 -32.8, Oxidation Stability, hours D943 2500, Rust Test D6665 PASS, A&B 48 hour Pump Wear Test DenISOn HF-o PASS, DenISOn Vane, T-52 Vickers M-2950-S PASS, Vickers 35VQ25 Four Ball Wear, D4172B scar diameter in mm 0.5, Water D1401 40-40-0(15), Separability 129.2 ?F Heat Test CM P-68 PASS. For Celsius conversion to Fahrenheit: (1.8 X degrees Celsius) + 32
Miles Hytex ISO 46 Aw Oils are high performance, anti-wear hydraulic oils designed for heavy-duty hydraulic systems operating over a wide range of temperatures. They produce excellent results in a wide variety of high pressure hydraulic systems found on industrial machinery, ships, woodlands and mining operations, and other mobile equipment. Miles HYTEX AW Oils are an exclusive blend of exceptionally pure Hydro Treated base oils (Hydrocracking), and specially selected additives that deliver outstanding performance and extended service life. Compared to conventional hydraulic oils, Miles HYTEX AW Oils offer: ?Outstanding, long term resistance to breakdown caused by air and high temperatures ?Improved anti-wear protection ?superior rust and corrosion prevention. Outstanding oxidation and thermal stability ?Longer life, which extends the time between oil changes?Elimination of harmful sludge and varnish deposits ensures continued smooth, reliable operation of hydraulic valves and actuators?Reduces operating and maintenance costs?Superior anti-wear protection ?Improves equipment reliability in all types of piston, gear and vane hydraulic pumps operating over a wide range of pressures ?Superior rust and corrosion protection ?Iron and metal components protected against water damage?Reduces maintenance costsExcellent water separability and hydrolytic stability ?Reusable after water is removed because HYTEX Oils separate readily from water without loss of performance additives?Reduces operating and maintenanc e cost. Improved foam and air entrainment performance ?Prevents overflowing of reservoirs?Eliminates ?sponginess? from hydraulic system operations, and damage due to pump cavitation?Improves equipment reliability. APPLICATIONS: Miles HYTEX AW Oils are recommended for heavy duty high pressure hydraulic systems operating over a wide range of temperatures. They may be used in systems equipped with fine filters without loss of additives or causing filter plugging. Because of their long life, rust and foam inhibiting features, HYTEX AW Oilsmay be used to lubricate anti-friction bearings and gears found in circulation, splash, bath and ring-oiled systems. HYTEX Oils are approved against the following hydraulic pump manufacturers? specifications: nISOn HF-0 Vickers 35VQ25 Cincinnati-Milacron P-68, P-69, P-70 HYTEX Oils are recommended for piston, gear and vane pumps, including those manufactured by: Vickers, Hagglunds-DenISOn, Cincinnati-Milacron, Sundstrand, Rexroth-Mannesman, Racine, Oilgear, Hydreco and Dynex. TYPICAL PROPERTIES: HYTEX Grade 46, ISO Grade 46, Operating Temp Range, ?F 23- 165.2, Viscosity cSt at 40 ?C = Sus / 100 F D445 47.0 200, Viscosity Index D2270 99, Flash Point, ?F D92 431.6, Pour Point, ?F D97 -27.4, Oxidation Stability, hours D943 2500, Rust Test D6665 PASS, A&B 48 hour Pump Wear Test DenISOn HF-o PASS, DenISOn Vane, T-52 Vickers M-2950-S PASS, Vickers 35VQ25our Ball Wear, D4172B scar diameter in mm 0.5, Water D1401 41-39-0(10), Separability 129.2 ?F Heat Test CM P-68 PASS. For Celsius conversion to Fahrenheit: (1.8 X degrees Celsius) + 32
Miles Hytex ISO 68 Aw Oils are high performance, anti-wear hydraulic oils designed for heavy-duty hydraulic systems operating over a wide range of temperatures. They produce excellent results in a wide variety of high pressure hydraulic systems found on industrial machinery, ships, woodlands and mining operations, and other mobile equipment. Miles HYTEX AW Oils are an exclusive blend of exceptionally pure Hydro Treated base oils (Hydrocracking), and specially selected additives that deliver outstanding performance and extended service life. Compared to conventional hydraulic oils, Miles HYTEX AW Oils offer: ?Outstanding, long term resistance to breakdown caused by air and high temperatures ?Improved anti-wear protection ?superior rust and corrosion prevention. Outstanding oxidation and thermal stability ?Longer life, which extends the time between oil changes?Elimination of harmful sludge and varnish deposits ensures continued smooth, reliable operation of hydraulic valves and actuators?Reduces operating and maintenance costs?Superior anti-wear protection ?Improves equipment reliability in all types of piston, gear and vane hydraulic pumps operating over a wide range of pressures ?Superior rust and corrosion protection ?Iron and metal components protected against water damage?Reduces maintenance costsExcellent water separability and hydrolytic stability ?Reusable after water is removed because HYTEX Oils separate readily from water without loss of performance additives?Reduces operating and maintenanc e cost. Improved foam and air entrainment performance ?Prevents overflowing of reservoirs?Eliminates ?sponginess? from hydraulic system operations, and damage due to pump cavitation?Improves equipment reliability. APPLICATIONS: Miles HYTEX AW Oils are recommended for heavy duty high pressure hydraulic systems operating over a wide range of temperatures. They may be used in systems equipped with fine filters without loss of additives or causing filter plugging. Because of their long life, rust and foam inhibiting features, HYTEX AW Oilsmay be used to lubricate anti-friction bearings and gears found in circulation, splash, bath and ring-oiled systems. HYTEX Oils are approved against the following hydraulic pump manufacturers? specifications: nISOn HF-0 Vickers 35VQ25 Cincinnati-Milacron P-68, P-69, P-70 HYTEX Oils are recommended for piston, gear and vane pumps, including those manufactured by: Vickers, Hagglunds-DenISOn, Cincinnati-Milacron, Sundstrand, Rexroth-Mannesman, Racine, Oilgear, Hydreco and Dynex. TYPICAL PROPERTIES: HYTEX Grade 20, ISO Grade 68, Operating Temp Range, ?F 32- 183.2, Viscosity cSt at 40 ?C = Sus / 100 F D445 68.4, 300, Viscosity Index D2270 93, Flash Point, ?F D92 438.8, Pour Point, ?F D97 -27.4, Oxidation Stability, hours D943 2500, Rust Test D6665 PASS, A&B 48 hour Pump Wear Test DenISOn HF-o PASS, DenISOn Vane, T-52 Vickers M-2950-S PASS, Vickers 35VQ25our Ball Wear, D4172B scar diameter in mm 0.4, Water D1401 40-40-0(10), Separability 129.2 ?F Heat Test CM P-68 PASS. For Celsius conversion to Fahrenheit: (1.8 X degrees Celsius) + 32
Miles Kool Sol Ss A is premium quality soluble oil. The emulsions in this product provide excellent tcoling, lubricity, and rust protection for use in a wide range of grinding and machining operations. It exhibits a milky white appearance. RECOMMENDATIONS:Miles Kool Sol Ss A is typically recommended for use at water/oil ratios of 20:1 to 40:1 in drilling, forming, planning, milling, sawing and turning operations on a variety of carbon and alloy steels ranging from soft to medium hardness, particularly where carbide tip toolings are being used.Miles Kool Sol Ss A is suited for light machining and is especially recommended for grinding operations where very clean emulsion are typically required to permit rapid settling of fines. This feature helps the emulsion keep the circulating lines clean and allows free flow of coolant to the workpiece. The absence of recycled grinding dirt in the emulsion keeps grinding wheels free cutting, thus, producing excellent finishes and promoting longer wheel life. FEATURES AND BENEFITSSOL-KUT is a general purpose soluble oil containing a high level of emulsifiers for superior performance. It readily emulsifies and forms very stable emulsions even with relatively hard waters and at high dilution ratios. SOL-KUT exhibits excellent cooling and lubricity properties to transfer heat away from the cutting zone and reduce friction between the cutting tool and the workpiece. The combination of the cooling and the lubricity properties provides improved dimensional accuracy and surface finish of parts and increased tool life.SOL-KUT provides excellent rust protection for both the machine and the parts being machined. It exhibits low foaming tendencies, and a high level of detergency which is beneficial in grinding operations to prevent loading of the grinding wheels with grit and fines. This also assists in the flushing and settling of chips and in keeping machines and parts clean.
Miles Kool Sol Ss B is a semi-synthetic general purpose metalworking coolant containing approximately 10% mineral oil. This product, when diluted with water, forms a translucent Amber emulsion which offers excellent work piece visibility, good lubricity, and superior cooling. Application: Designed for use in metalworking applications such as all CNC milling,turning, drilling, tapping, and grinding, Miles Kool Sol Ss B is also excellent on conventional machining processes and sawing applications.Typical Properties:Appearance-Concentrate Amber liquid,Appearance- Dilution Translucent Amber,Residual Film Soft, fluid,pH @ 20:1 9.0 ? 0.2,Lbs/Gallon 8.34 ? 0.1,Total Chlorine, wt % None,Flash point, COC ?F None
Miles Kool Sol Ss B is a semi-synthetic general purpose metalworking coolant containing approximately 10% mineral oil. This product, when diluted with water, forms a translucent Amber emulsion which offers excellent work piece visibility, good lubricity, and superior cooling. Application: Designed for use in metalworking applications such as all CNC milling,turning, drilling, tapping, and grinding, Miles Kool Sol Ss B is also excellent on conventional machining processes and sawing applications.Typical Properties:Appearance-Concentrate Amber liquid,Appearance- Dilution Translucent Amber,Residual Film Soft, fluid,pH @ 20:1 9.0 ? 0.2,Lbs/Gallon 8.34 ? 0.1,Total Chlorine, wt % None,Flash point, COC ?F None
MILES MIL-GEAR 80W140 is fully synthetic, PAO based, gear oils, designed for heavy-load and high-temperature applications and formulated with enhanced extreme-pressure (EP) additives. Series Miles Mil-Gear Provides excellent protection and a long fluid life ? even in the most demanding applications and environments. Enhanced resistance against water contamination, Excellent protection against wear, rust and corrosion, Reduced maintenance costs and downtime, Non-toxic/non-hazardous.".Applications:Lubricants used in conjunction with Eaton and Meritor extended warranties ?Heavy-duty differentials ?Transfer cases for automobiles, light and heavy-duty trucks, farm equipment and heavy construction equipment ?Conventional manual transmissions where the manufacturer specifies a GL-5 oil ?All applications normally lubricated by automotive gear oil such as rear wheel bearings, manual steering gears and universal joints. ?Industrial gear applications where extreme pressure oils with excellent low and high temperature properties are required.Specifications:API Classifications GL-5 and MT-1 ?Dana Corporation, Axle Division ? Shaes 256 ? Shaes 254 ?Eaton Axle Division oPS-163 (E500 ? 500,000 mile drain interval Roadranger Extended Warranty) ? Shaes 256 oPS-037 (E250 ? 250,000 mile drain interval Roadranger Extended Warranty) ? Shaes 254 PS-109 (obsolete) ?General Electric D50E9C ?Harnischfeger (P&H) 474 ?Mack Truck ? GO-J Plus (75W90) GO-J (80W40) ?Meritor Automotive, Inc. O-76-E (petrol) O-76-n (syn) (75W90) ?MIL-PRF-2105E ?Navistar TMS 6816 ?Industry standards for Demulsibility U.S. steel Specification 224 American Gear Manufacturers (AGMA) Standard 250.03.TYPICAL PROPERTIES: Viscosity Index-150, Viscosity cst @ 40OC - 283, Viscosity cSt @ 100OC-31.9, Viscosity SUS @ 100OF-1470, Viscosity SUS @ 210OF -156, Flash Point OF-450,Pour Point OF - 35,Copper Strip Corrosion-1B,Specific Gravity-0.888.
MILES MIL-GEAR 80W140 is fully synthetic, PAO based, gear oils, designed for heavy-load and high-temperature applications and formulated with enhanced extreme-pressure (EP) additives. Series Miles Mil-Gear Provides excellent protection and a long fluid life ? even in the most demanding applications and environments. Enhanced resistance against water contamination, Excellent protection against wear, rust and corrosion, Reduced maintenance costs and downtime, Non-toxic/non-hazardous.".Applications:Lubricants used in conjunction with Eaton and Meritor extended warranties ?Heavy-duty differentials ?Transfer cases for automobiles, light and heavy-duty trucks, farm equipment and heavy construction equipment ?Conventional manual transmissions where the manufacturer specifies a GL-5 oil ?All applications normally lubricated by automotive gear oil such as rear wheel bearings, manual steering gears and universal joints. ?Industrial gear applications where extreme pressure oils with excellent low and high temperature properties are required.Specifications:API Classifications GL-5 and MT-1 ?Dana Corporation, Axle Division ? Shaes 256 ? Shaes 254 ?Eaton Axle Division oPS-163 (E500 ? 500,000 mile drain interval Roadranger Extended Warranty) ? Shaes 256 oPS-037 (E250 ? 250,000 mile drain interval Roadranger Extended Warranty) ? Shaes 254 PS-109 (obsolete) ?General Electric D50E9C ?Harnischfeger (P&H) 474 ?Mack Truck ? GO-J Plus (75W90) GO-J (80W40) ?Meritor Automotive, Inc. O-76-E (petrol) O-76-n (syn) (75W90) ?MIL-PRF-2105E ?Navistar TMS 6816 ?Industry standards for Demulsibility U.S. steel Specification 224 American Gear Manufacturers (AGMA) Standard 250.03.TYPICAL PROPERTIES: Viscosity Index-150, Viscosity cst @ 40OC - 283, Viscosity cSt @ 100OC-31.9, Viscosity SUS @ 100OF-1470, Viscosity SUS @ 210OF -156, Flash Point OF-450,Pour Point OF - 35,Copper Strip Corrosion-1B,Specific Gravity-0.888.
Miles Mil-Gear S 75W90 is fully synthetic, PAO based, gear oils, designed for heavy-load and high-temperature applications and formulated with enhanced extreme-pressure (EP) additives. Series Miles Mil-Gear Provides excellent protection and a long fluid life ? even in the most demanding applications and environments. Enhanced resistance against water contamination, Excellent protection against wear, rust and corrosion, Reduced maintenance costs and downtime, Non-toxic/non-hazardous."Applications:Lubricants used in conjunction with Eaton and Meritor extended warranties ?Heavy-duty differentials ?Transfer cases for automobiles, light and heavy-duty trucks, farm equipment and heavy construction equipment ?Conventional manual transmissions where the manufacturer specifies a GL-5 oil ?All applications normally lubricated by automotive gear oil such as rear wheel bearings, manual steering gears and universal joints. ?Industrial gear applications where extreme pressure oils with excellent low and high temperature properties are required.Specifications:API Classifications GL-5 and MT-1 ?Dana Corporation, Axle Division ? Shaes 256 ? Shaes 254 ?Eaton Axle Division oPS-163 (E500 ? 500,000 mile drain interval Roadranger Extended Warranty) ? Shaes 256 oPS-037 (E250 ? 250,000 mile drain interval Roadranger Extended Warranty) ? Shaes 254 PS-109 (obsolete) ?General Electric D50E9C ?Harnischfeger (P&H) 474 ?Mack Truck ? GO-J Plus (75W90) GO-J (80W40) ?Meritor Automotive, Inc. O-76-E (petrol) O-76-n (syn) (75W90) ?MIL-PRF-2105E ?Navistar TMS 6816 ?Industry standards for Demulsibility U.S. steel Specification 224 American Gear Manufacturers (AGMA) Standard 250.03 .TYPICAL PROPERTIES: Viscosity Index-146, Viscosity cst @ 40OC - 157, Viscosity cSt @ 100OC-17.8, Viscosity SUS @ 100OF-727, Viscosity SUS @ 210OF -89, Flash Point OF-425,Pour Point OF - 50,Copper Strip Corrosion-1B,Specific Gravity-0.877.
Miles Mil-Gear S ISO 32 is full synthetic gear oil, formulated to provide a long fluid life with excellent lubricity and wear protection. It offers outstanding protection ? even in the most demanding applications. ? Enhanced resistance against water contamination ? Reduced maintenance costs and downtime ? Excellent protection against wear, rust and corrosion ? Non-toxic/non-hazardous. TYPICAL PROPERTIES: ISO Grade 32; Viscosity cSt @ 40?C 32, Viscosity cSt @ 100?C 5.6, Viscosity Index 114, Flash Point ?F (?C) 420 (215) Pour, Point ?F (?C) -55 (-48), Timken OK Load, Kg 40, Copper Corrosion, 24 Hr 1a, Demulsibility, 130?F, 30 Min 40/40/0
Miles Mil-Gear S ISO 320 is full synthetic gear oil, formulated to provide a long fluid life with excellent lubricity and wear protection. It offers outstanding protection ? even in the most demanding applications. ? Enhanced resistance against water contamination ? Reduced maintenance costs and downtime ? Excellent protection against wear, rust and corrosion ? Non-toxic/non-hazardous. TYPICAL PROPERTIES Lubrication Properties MILES MIL-GEAR S ISO 320 Viscosity Index 114, Viscosity cSt @ 40?C -308.2, Viscosity cSt @ 100?C -26.6, Flash Point ?F 522, Auto-Ignition Point ?F 810, Pour Point ?F -31, Timken OK Load, Kg 40, Copper Corrosion, 24 Hr 1a, Demulsibility, 130?F, 30 Min 40/40/0
Miles Mil-Gear S ISO 460 is full synthetic gear oil, formulated to provide a long fluid life with excellent lubricity and wear protection. It offers outstanding protection ? even in the most demanding applications. ? Enhanced resistance against water contamination ? Reduced maintenance costs and downtime ? Excellent protection against wear, rust and corrosion ? Non-toxic/non-hazardous. TYPICAL PROPERTIES Lubrication Properties MILES MIL-GEAR S ISO 460 Viscosity Index 115, Viscosity cSt @ 40?C -457.0, Viscosity cSt @ 100?C -35.0, Flash Point ?F 525, Auto-Ignition Point ?F 812, Pour Point ?F 22, Timken OK Load, Kg 40, Copper Corrosion, 24 Hr 1a, Demulsibility, 130?F, 30 Min 40/40/0