Bolt Anchor, Anchor Diameter 1/2 in, Overall Length 2 7/8 in, Thread Size 1/2 In., Drill Bit Size 1/2 in, Material Zinc Alloy, Finish Zinc Plated, Material Grade/Class Grade 5, Minimum Installation Depth 2 3/8 in, Nut Material Zinc Alloy, System of Measurement Inch, Manufacturer Location Made in USA, Compatible Hole Diameter 0.5 in, Compatible Material Concrete, Head Width 0.75 in, Installation Method Double Taper Bolt with Expansion Nut, Maximum Installation Torque 90 ft-lb, Removable Removable
Brushless Blower, Single Phase, Voltage 115V AC, Full Load Amps 5.0, Blower Type Tangential Discharge, Watts 400 W, Max. Amps 5 A, 60/50 Hz, Motor Thermal Protection Auto, Ins. Class B, Max. Ambient Temp. 50 Degrees C, Motor Enclosure Design Open, Motor Mounting Position All Angle, Vacuum Rating 24 in wc, CFM 105 cfm, Motor Bearings Ball, Blower Stages 1, Overall Length 6 in, Length Less Shaft 5 1/8 in, Height 5 11/16 in