DVR XP 16 in. x 24 in. Electronic Variable Speed Wood Lathe is an excellent all round lathe. It has an intelligent 1.75HP DVR motor with features such as chisel dig in safety sensing, favorite speed settings and out of balance work adjustment. Super smooth operation and incredible torque. With a very low speed of 100rpm up to 3500 RPM, it?s the perfect solution for a wide variety of projects, from small pens to large bowls and platters. The NOVA DVR XP offers 16 in. swing capacity (expandable to 29 in. capacity outboard with optional outrigger accessory) and 24 in. between centers, expandable in 20 in. increments with the optional bed extension accessory. Forward and reverse feature. Available in 1-1/4-in.-8 TPI Thread. Full swivel head functionality and solid cast iron components complete the package. Standard equipment includes 1.75HP DVR motor, 3 in. faceplate, 12 in. Tool rest, 2MT Live Center, 2MT Spur/Drive Center, Manual and Fastenings. Designed by Teknatool International, innovating since 1955. Backed by a full replacement 2-year warranty on all parts and a further 3-Year limited warranty on all parts excluding motor, electronics, and consumables, for a total of 5-Years limited warranty. Call our customer service center on 727-954-3433.
NOVA 10051 10 in 1 Chuck Gauge Accessory is an accessory for NOVA Chucks and the general workshop. This handy gauge is exclusive to the NOVA Chuck range. Quickly and easily work out your dovetails accurately. If you use a Chuck, this is an essential accessory. In addition, this useful gauge also comes with a variety of common measurement and gauging functions used in the wider workshop, such as an angle checker for knives, carving tools, chisels and planer blades. Also a diameter gauge, a center finder, a dowel gauge, a furniture angle gauge, a ruler scale and many other functions. Designed by the innovators of the 4 Jaw Chuck for wood turning, Teknatool International - since 1955. Backed by a full replacement 2-year warranty. Call our customer service center toll free on 1-866-748-3025.
NOVA 6006 Mini Cole Chuck Accessory Jaw Set is an accessory for NOVA Chucks, designed to expand your range and capacity of your standard NOVA Chuck for specific projects and applications. Universally fits to any NOVA Chuck for maximum flexibility, saving money as duplicate accessories are not needed for different NOVA Chucks. NOVA 6006 Mini Cole Chuck Accessory Jaw Set is a versatile set, designed for the re-chucking of bowls to remove chuck marks, add decoration or to re-shape the bottoms of bowls that have already been turned. Other NOVA Accessory jaw sets can be added to the Cole Jaws making a combination jaw facility - expanding dovetail facility for mounting bowls/platters and a reverse dovetail for mounting footed bowls/platters. These jaws have many advantages over traditional vacuum chucking. Suitable for lathes with a minimum 8 swing diameter. Die cast aluminum with pre-set holes, for precise closing, durability and long life. Comes with 4 jaw segments, special fasteners, standard rubber bumpers and instructions. Additional accessory bumpers are available. Designed by the innovators of the 4 Jaw Chuck for wood turning, Teknatool International - since 1955. Backed by a full replacement 2-year warranty, call our customer service center toll free on 1-866-748-3025.Some accessories such as larger jaws are only suitable for use on the larger NOVA Chucks, please check manual prior to use.
NOVA JS100N 100 mm (4) Chuck Accessory Jaw Set is an accessory for NOVA Chucks, designed to expand your range and capacity of your standard NOVA Chuck for specific projects and applications. Universally fits to any NOVA Chuck for maximum flexibility, saving money as duplicate accessories are not needed for different NOVA Chucks. The NOVA JS100N 100 mm (4 in.) Chuck Accessory Jaw Set is one of our most popular chuck accessories to mount 12-14 in. bowls. They are designed particularly for the expanded dovetail, reverse dovetail for gripping footed bowls. Can mount customized false wooden jaws, so that customized jaws can be made for special purposes. With a special NOVA wood turning dovetail profile, designed specifically for maximum strength and holding in wood turning, without crushing the wood fibers. These jaws will hold in both the contraction and the expansion modes. Precisely machined from a single solid piece of 1045 high tensile steel for precise closing, durability and long life. Comes with 4 jaw segments and instructions. Uses the standard fasteners that come with your NOVA Chuck. Designed by the innovators of the 4 Jaw Chuck for wood turning, Teknatool International - since 1955. Backed by a full replacement 2-year warranty, call our customer service center toll free on 1-866-748-3025.Some accessories such as larger jaws are only suitable for use on the larger NOVA Chucks, please check manual prior to use.
NOVA JS130N 130 mm (5) Chuck Accessory Jaw Set is an accessory for NOVA Chucks, designed to expand your range and capacity of your standard NOVA Chuck for specific projects and applications. Universally fits to any NOVA Chuck for maximum flexibility, saving money as duplicate accessories are not needed for different NOVA Chucks. The NOVA JS130N 130 mm (5 in.) Chuck Accessory Jaw Set is designed to mount big bowls, up to 29 in. diameter. They are designed particularly for the expanded dovetail, reverse dovetail for gripping footed bowls. With a special NOVA wood turning dovetail profile, designed specifically for maximum strength and holding in wood turning, without crushing the wood fibers. These jaws will hold in both the contraction and the expansion modes. Precisely machined from a single solid piece of 1045 high tensile steel for precise closing, durability and long life. Comes with 4 jaw segments and instructions. Uses the standard fasteners that come with your NOVA Chuck. Designed by the innovators of the 4 Jaw Chuck for wood turning, Teknatool International - since 1955. Backed by a full replacement 2-year warranty, call our customer service center toll free on 1-866-748-3025.Some accessories such as larger jaws are only suitable for use on the larger NOVA Chucks, please check manual prior to use.
NOVA JS50N 50 mm (2) Chuck Accessory Jaw Set is an accessory for NOVA Chucks, designed to expand your range and capacity of your standard NOVA Chuck for specific projects and applications. Universally fits to any NOVA Chuck for maximum flexibility, saving money as duplicate accessories are not needed for different NOVA Chucks. The NOVA JS50N 50 mm (2 in.) Chuck Accessory Jaw Set comes standard with most NOVA Chucks, providing a versatile all round jaw to get you started, before moving onto more specialized jaws. These are able to handle both bowl and spigot projects. With a special NOVA Wood Turning Dovetail Profile, designed specifically for maximum strength and holding in Wood Turning, without crushing the wood fibers. These jaws will hold in both the contraction and the expansion modes. Precisely machined from a single solid piece of 1045 High Tensile Steel for precise closing, durability and long life. Comes with 4 jaw segments and instructions. Uses the standard fasteners that come with your NOVA Chuck. Designed by the innovators of the 4 Jaw Chuck for Woodturning, Teknatool International since 1955. Backed by a full replacement 2-year warranty, call our customer service center toll free on 1-866-748-3025. Some accessories such as larger jaws are only suitable for use on the larger NOVA Chucks, please check manual prior to use.
NOVA JS75DT Step Chuck Accessory Jaw Set is an accessory for NOVA Chucks, designed to expand your range and capacity of your standard NOVA Chuck for specific projects and applications. Universally fits to any NOVA Chuck for maximum flexibility, saving money as duplicate accessories are not needed for different NOVA Chucks. The NOVA JS75DT Step Chuck Accessory Jaw Set has three step sizes providing optimum gripping of 3 base (foot) sizes with minimal crush damage to wood. The optimum step sizes are 1.65, 2 in., 2.5 in. With a special NOVA wood turning dovetail profile, designed specifically for maximum strength and holding in wood turning, without crushing the wood fibers. These jaws will hold in both the contraction and the expansion modes. Precisely machined from a single solid piece of 1045 high tensile steel for precise closing, durability and long life. Comes with 4 jaw segments and instructions. Uses the standard fasteners that come with your NOVA Chuck. Designed by the innovators of the 4 Jaw Chuck for wood turning, Teknatool International - since 1955. Backed by a full replacement 2-year warranty, call our customer service center toll free on 1-866-748-3025.Some accessories such as larger jaws are only suitable for use on the larger NOVA Chucks, please check manual prior to use.
NOVA JSCOLE Cole Chuck Accessory Jaw Set is an accessory for NOVA Chucks, designed to expand your range and capacity of your standard NOVA Chuck for specific projects and applications. Universally fits to any NOVA Chuck for maximum flexibility, saving money as duplicate accessories are not needed for different NOVA Chucks. NOVA JSCOLE Cole Chuck Accessory Jaw Set is a versatile set, designed for the re-chucking of bowls to remove chuck marks, add decoration or to re-shape the bottoms of bowls that have already been turned. Other NOVA Accessory jaw sets can be added to the Cole Jaws making a combination jaw facility - expanding dovetail facility for mounting bowls/platters and a reverse dovetail for mounting footed bowls/platters. These jaws have many advantages over traditional vacuum chucking. Suitable for wood lathes with a minimum 12 swing diameter. Die cast aluminum with pre-set holes, for precise closing, durability and long life. Comes with 4 jaw segments, special fasteners, standard rubber bumpers and instructions. Additional accessory bumpers are available. Designed by the innovators of the 4 Jaw Chuck for wood turning, Teknatool International - since 1955. Backed by a full replacement 2-year warranty, call our customer service center toll free on 1-866-748-3025.Some accessories such as larger jaws are only suitable for use on the larger NOVA Chucks, please check manual prior to use.
NOVA SuperNOVA2 23055 Wood Turning Chuck Insert Type is a 4 Jaw self centering geared chuck, suitable for a wide variety of wood lathes with up to 20 in. swing. Packed with unique NOVA features such as Composite Indexing Back, Auto Stop, Copper composite Jaw Slides, Woodworm Screw, Comfortable T Bar Handle and 2 in. Jaws as standard, the SuperNOVA2 Chuck is fully featured and one of the most popular on the market today. Powerful patented Tuff Lock gearing with precise, hardened action delivers incredibly smooth strength for a solid, vibration free performance - you'll find yourself turning longer, more delicate stems and large, uneven and rough work that you couldn't handle before can be turned with greater security. Takes the same accessory range as other NOVA Chucks. Insert Type Chuck, requires additional insert adaptor to fit to lathe. Designed by the innovators of the 4 Jaw Chuck for wood turning, Teknatool International - since 1955. Backed by a full replacement 2-year warranty, call our customer service center toll free on 1-866-748-3025.